Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Wtw5105hc5 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Washer Door Hinge Left Side
Genuine Whirlpool part
By: Whirlpool
Part Number: W11551369

Left-side door hinge for washers. Replace when door sags, won't close properly, or makes scraping sounds. Restores alignment and secure closure. Verify fit with your model number before ordering.

Do-It-Yourself Stories from Customers like You Washer lid started slamming shut   Allan K. • Phoenix , AZ • May 06, 2026

New hinges Read more

More
$54.25

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw (7-2-1)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10249633

This replacement 7-2-1 screw secures components in compatible Whirlpool appliances, providing a dependable fastener for panels and assemblies. Use it to restore proper fitment and reduce rattling or loose parts. What it does

  • Fastens trim, panels, brackets, or internal assemblies to keep parts secure
  • Helps stop vibration-related noise from loose components
  • Restores correct mounting where the original screw is missing or damaged
  • Matches the form and fit of the OEM fastener for intended attachment points
What's included
  • One replacement 7-2-1 screw
Install notes
  • Use the correct driver to avoid stripping the screw head
  • Hand-start threads before tightening to prevent cross-threading
  • Tighten until snug—do not over-tighten to avoid damaging plastic or sheet-metal parts
  • Disconnect power to the appliance before accessing internal areas

Do-It-Yourself Stories from Customers like You Gear assembly was bad   Lewis S. • Cumming , GA • November 06, 2018

Replaced it with a new gear housing assembly. It was some what difficult removing the spindle hub. Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer User Interface Wiring Harness
Genuine Whirlpool part
By: Whirlpool
Part Number: W11662157

Console not responding or display flickering? This washer user interface wiring harness restores reliable signal and power routing between control board and panel.

More
$13.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Wire Harness
Genuine Whirlpool part
By: Whirlpool
Part Number: W11676811

Fix washer electrical issues with this wire harness. Restores power and signal connections when original wiring is damaged or corroded. Direct fit.

More
$37.78

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Fill Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212641RP

5 foot. Package of 2.

Do-It-Yourself Stories from Customers like You Our 11 year old Maytag clothes washer had an ld error code and we suspected the water pump was bad there was a hum when the machine was trying to pump the water   David F. • Berlin , MD • April 12, 2021

We found the pump online at AppliancePartsPros.com for our model of Maytag. When we found the part, there was a video posted that was for our exact pump and washer. After watching it, we called Appliance Parts Pros to verify the part. The customer service representative was incredibly helpful and confirmed our diagnosis. We ordered the pump as well as hoses and clamps in case we needed them. We ordered them overnight delivery and the customer service rep said that we might not receive it... Read more

More
$29.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Siphon Break Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 285320

This siphon break kit prevents water from siphoning back out of the washing machine tub through the drain hose during the fill cycle. It acts as an air gap device installed on the drain line to ensure proper water levels are maintained. Replace this kit if your washer is not filling properly, takes too long to fill, or you notice water draining out as fast as it fills.

Do-It-Yourself Stories from Customers like You I needed a siphon valve for an old maytag washer   Shane F. • San Anselmo , CA • April 17, 2015

I bought a part and it worked perfectly. I was able to connect a flexible pipe to the siphon valve and set up a grey water system from our washing machine. Read more

More
$59.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Touch-Up Paint (Appliance Finish Repair Bottle)
Genuine Whirlpool part
By: Whirlpool
Part Number: W10446202

This touch-up paint bottle restores small chips and scratches on painted appliance surfaces to improve appearance and help protect against rust. Easy-to-apply formula matches common appliance finishes for quick cosmetic repairs. What it does:

  • Covers small chips, nicks and surface scratches to improve appearance
  • Helps protect exposed metal from moisture and surface corrosion after damage
  • Provides a precise application for targeted repairs on doors, panels and trim
  • Can be used on painted steel and metal appliance surfaces (test in an inconspicuous area first)
What's included: One touch-up paint bottle. Install notes:
  • Clean and dry the repair area; remove loose paint and corrosion before applying
  • Shake bottle well and apply sparingly with included applicator or a small brush
  • Allow adequate drying time between coats and follow any manufacturer cure instructions on the label
  • Wear gloves and work in a well-ventilated area; keep away from open flame and out of reach of children

More
$23.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Switch Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9740848

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

  • Loose or rattling switch within the console face  
  • Difficulty selecting cycles as buttons wobble out of place
  • Water intrusion hastening corrosion of electrical terminals
  • Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Neptune mah4000 had a no spin but did pump water out but not all of it   Guillermo S. • Chicago , IL • March 06, 2017

I had the problem couple years ago I bypassed unbalance switch it worked fine for a couple years and had the same problem again so ruled out unbalanced switch. Door lock light on and checked made sure wax motor pushed out all the way too the second switch for spin check OK, so took a chance on displacement switch x2. My family loves to over load it and also replaced by passed unbalance switch and boom every thing went back to normal. Its also good to clean every thing when apart. Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Laundry Center Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10004910

Factory fastener that secures panels and components in your laundry center. Replace if missing, stripped, or corroded to maintain proper alignment.

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Fill Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212487RC

If your washer isn't filling properly or you see water leaking during fill, this fill hose carries water from the inlet valve to the tub. Quick fix.

More
$44.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Hose-Fill
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212656RP

Kit contains two 10 feet inlet hoses.

More
$32.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Tub Cover
Genuine Whirlpool part
By: Whirlpool
Part Number: W11662156

Washer tub cover panel that protects internal components. Replace if cracked, broken, or missing to restore proper fit and quiet operation.

More
$47.41

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Stainless Steel Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W11679612

Stainless steel 10-32 screw secures panels, brackets, and hardware inside your washer. Replace if lost, stripped, or corroded during repairs.

More
$13.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer U-Bend Hose Retainer Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10280024

Secures U-shaped drain hoses or heating elements in washers. Replace if cracked, broken, or missing to prevent hose movement and potential leaks.

Do-It-Yourself Stories from Customers like You F02 fail to drain repeated suds warnings   John C. • Eagle River , AK • February 18, 2019

Prior to ordering parts I had pulled the pump strainer basket and cleaned it out. There was both soft and hard scale build up. The tub-to-pump hose was also pretty crusty/slimey. Still got warnings for SUDS and repeated F02 errors. Ordered parts and replaced the pump, tub-to-pump hose, interior drain hose and exterior drain hose (both hoses has some slime build up). The water standing in the tub when I emptied it the first time had very little suds but we kept getting the SUDS warning. ... Read more

More
$50.57

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Brace
Genuine Whirlpool part
By: Whirlpool
Part Number: W11381327

Replacement brace for washers. This structural support part mounts inside the cabinet to stabilize components. Order a new brace if original is cracked or broken.

More
$51.62

IN STOCK
Ships Today Guaranteed
Add to Cart
Dispenser Wiring Harness (3-Coil)
Genuine Whirlpool part
By: Whirlpool
Part Number: W11524850

This 3-coil dispenser wiring harness connects the dispenser controls to the refrigerator's dispenser and ice/water components, restoring reliable electrical signals for proper dispenser operation. It replaces damaged or worn dispenser wiring. What it does:

  • Provides three insulated conductors to route power and signals between the dispenser control and dispenser components
  • Restores interrupted dispenser function when wires are broken, frayed, or connectors are loose
  • Helps eliminate intermittent dispenser operation or non-responsive dispenser buttons
  • Prevents short circuits caused by exposed or pinched wiring when installed correctly
What's included:
  • One 3-coil dispenser wiring harness with factory-style connectors
Install notes:
  • Disconnect power to the appliance before starting any repair
  • Access may require removing the dispenser housing or interior panels; keep fasteners organized
  • Match connector shapes and pin counts; do not force connectors to mate
  • Inspect adjacent wiring and secure the harness away from sharp edges or moving parts

More
$44.24

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google