Wtw8700xw2 Parts

This is a replacement bezel — the trim piece that surrounds and protects the appliance control panel, restoring a clean appearance and helping keep buttons and displays shielded from spills and wear. Ideal when the original trim is cracked or cosmetic. What it does

• Covers and protects the control panel area from spills, dust and everyday wear
• Restores a finished look when the original bezel is scratched, faded or broken
• Helps keep control buttons and display edges aligned and accessible
• Fits at the front of the control console and works with existing buttons and switches

• One bezel as pictured

• High-level: typically snaps or screws into the control console — follow your appliance's service manual for removal and reassembly
• Disconnect power before starting work to avoid shock or accidental machine start
• Handle plastic trim carefully to avoid additional cracking; use appropriate screwdrivers or trim tools
• If other control components are damaged, inspect those parts before reassembly

This clamp secures a flexible appliance hose to a fitting to help prevent leaks and keep connections tight. It's a small but essential part that restores a proper seal on water or drain lines. What it does:

• Holds a hose firmly to a tailpiece, barb or connector to reduce leaks and hose slippage
• Helps stop intermittent dripping or pooling caused by loose hose connections
• Restores a proper seal after hose replacement or maintenance
• Works on common appliance water/drain lines where this clamp style is used

• One hose clamp

• Disconnect power and shut off water to the appliance before starting any work
• Allow the appliance and hoses to cool if recently used; use gloves and eye protection
• Use appropriate pliers or a screwdriver (depending on clamp style) to remove and install the clamp; avoid over-tightening
• Inspect the hose and fitting for damage; replace the hose if cracked or worn

This replacement dryer heater is the heating element assembly that warms air inside the dryer so clothes dry efficiently. Restores normal drying performance when the original heater has failed. What it does:

• Generates the heat required for the dry cycle so laundry reaches the selected temperature
• Commonly used when the dryer produces no heat or clothes remain damp after a full cycle
• Can help resolve long dry times and reduced drying efficiency caused by a failed element
• Works with the dryer's air flow system to deliver consistent, controlled heat

• Disconnect power (unplug or shut off breaker) before starting any work.
• Allow the dryer to cool completely; heating elements and surrounding metal may be hot or sharp.
• Handle the element carefully to avoid bending or damaging the coils; secure all wiring and ground connections during reassembly.
• If replacing the heater for a no-heat issue, also inspect the thermal fuse, thermostats, and venting for related faults.

This genuine replacement water filter cartridge helps keep your refrigerator's ice and drinking water tasting clean by reducing particles and common impurities. Designed to restore proper flow and filtration for compatible Whirlpool-family refrigerators. What it does:

• Filters water used for ice and drinking to improve taste and clarity
• Helps reduce dirt, sediment, and other common particulates that cause cloudiness
• Restores weakened or slow water flow caused by a clogged or old filter
• Supports normal ice production by maintaining filtered water supply

• One water filter cartridge

• Replace with the refrigerator powered on but the water supply turned off if required by your model
• Flush several gallons of water through the filter after installation to clear air and carbon fines
• Follow your refrigerator's manual for filter location, removal, and reset steps
• If you detect leaks or persistent water flow issues, turn off water.

This wire harness routes electrical power and signals between appliance components to restore reliable operation. Replacing a damaged or burnt harness helps stop shorts and intermittent electrical problems so the appliance can function safely. What it does:

• Carries power and control signals between modules, switches, and motors
• Restores reliable electrical connections when wiring is damaged, burned, or corroded
• Helps eliminate intermittent operation, failure to start, or erratic control behavior
• Prevents shorts or open circuits caused by frayed or broken wires

• Disconnect all power (unplug or shut off breaker) before starting any repair
• Compare connectors, pin counts and routing to the original harness before installation
• Route and secure the harness to avoid contact with sharp edges, heat sources or moving parts

The Bracket Dryer is an OEM part compatible with Whirlpool dryers. This bracket provides stability and structure by securing the dryer cabinet to the base frame. It is a necessary component that allows for proper mounting and alignment of the dryer. 

Causes of a bad bracket can include cracking, bending, or warping over time and use. Exposure to excessive heat or impact can damage the bracket and compromise its integrity.  

Symptoms of a bad bracket include:

• Vibrating or noisy dryer 
• Loose cabinet that is not firmly mounted
• Difficulty leveling or aligning the dryer
• Stress on other components like doors or panels

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: Grey (Chrome Shadow)

The Lid Hinge is an OEM part for Whirlpool washing machines. It connects the lid to the washing machine body, allowing the lid to open and close smoothly. This hinge ensures the lid remains securely attached while providing the necessary movement for easy access to the washer drum.

Common causes of a bad lid hinge include repeated use over time, accidental impact, or corrosion from exposure to moisture. These factors can cause the hinge to become loose, stiff, or broken.

Symptoms of a bad Lid Hinge include:

• Difficulty opening or closing the lid
• The lid not staying open or falling shut unexpectedly
• Unusual noises when moving the lid
• Visible damage or rust on the hinge

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.