Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Flood Switch Assembly is an OEM part for GE dishwashers. This part detects water levels and prevent overfilling by shutting off the water supply if a potential flood condition is detected.
Causes of a bad flood switch assembly can include electrical failures, wear and tear over time, or damage from water exposure.
Symptoms of a bad flood switch assembly include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered a new flood switch and activation stem from Aplliance Parts Pros.com. Order was delivered in about 3 days. Installed new switch and stem in about 15 min. Removed front kicker panel with two screws, the switch was just inside the panel secured with two screws. remove the electrical connector, removed screws, replace the two new parts..put the screws back in place and ran the washer...no overflows. Read more
Upper dishrack roller and axle kit includes: 4 rollers and 4 axles.
Replaced all of the broken parts with the new parts from Appliance Parts Pros. Read more
Dishwasher rack tine clip. Used to hold the tines in place within the rack. Color: gray. Measures about 1 inch wide by 1 inch high by 1-1/2 inches deep.
I replaced the pump drain assembly. The flapper valve was included in the assembly, so I did not need to order that. On previous repairs, the old drain hose was tricky to reinstall, so I replaced it and the hose clamp.The silverware basket had holes in the bottom and required replacement. I had some broken tine clips. Read more
This dishwasher flood switch seal sits around the flood/leak switch to create a watertight barrier at the switch opening. Replacing a cracked or flattened seal helps stop under-unit drips and keeps leak detection working properly.
Thanks to appliancepartspros.com the dishwasher was able to be repaired quickly and under budget. I removed the motor pump assembly and replaced it. I was also able to change out the faulty flood switch and replace the seals to stop the leak. The appliance is once again good as new and ready to run a new load of dishes. Read more
Dishwasher overflowing or leaking from the door? A faulty float can cause overfill issues. This float controls water level and prevents flooding.
The inner track component that allows the upper dishwasher rack to slide smoothly in and out for loading and unloading. Replace when the rack binds, tilts unevenly, or becomes difficult to pull out or push back in.
This middle spray arm bracket secures the mid-level spray arm to the upper rack, keeping it centered and aligned so it spins freely and delivers even spray coverage for reliable cleaning performance.
Removed upper basket out of dishwasher by removing slide arm stops. Turned basket upside down and removed broken parts. Took 5 minutes to take apart and put back together. Read more
Replaces a cracked, broken, or missing dishwasher vent cover that mounts on the inner door panel. Shields the exhaust opening and directs airflow.
The 4 screws that hold the vent cover in place also hold the assembly inside the door that has the heater motor and other items. The four screws go through the assembly inside the door, through the door and into 4 plastic legs on the vent cover. Two of the legs on the vent cover were broken and therefore the vent cover and the assembly inside the door were not being held tight against the door. The water was leaking in that area. Read more
Fix dishwasher overfilling or not filling properly by replacing the float dome. Snaps onto the float assembly to control water level. DIY repair.
Exact GE part, so perfect. Thank you! Read more
I found the schematics on your site and took my best guess at the individual components that I should replace, related to the flood switch. I guessed correctly. Read more
This was not an obvious source of a leak. The Tower Heater Assembly Nut developed a crack over time due to heat exposure. So the leak was gradual slowly getting worse over time. It was a hairline crack that ran down one of the edges of the nut making it hard to see. In talking to a pro he said it isn't a common problem. It is all the way in the back of the bottom of the dishwasher so it is not something you can see without pulling the dishwasher out and running it. The repair itself is easy. I... Read more
Remove the unit. Unscrewed filler cup. Put on new part. FIXED PROBLEM. Read more
Protects your dishwasher's interior light from moisture and food debris. Replace if cracked, missing, or causing leaks around the light assembly.
We discovered that our dishwasher was leaking around one of the lights. The plastic lens cover held the light tight and sealed it. Unfortunately the part was there the week before in the bottom of the dishwasher. I didn't know what it was and threw it out. I went to appliance Partspros because, I have past experience with great product and great service. I ordered the parts and install them the day I received them. No more leaks. Read more
I used lime away, vinegar, finish washer cleaner none of them worked. Finally just use Brillo on the entire cabinet interior. It came out very clean. Only needed very light scrubbing. Then replaced the severely corroded filters Riser tube and upper jet which was not turning. After this the upper arm turned perfectly silverware and glassware and silverware came out rinse very clean. Will do preventative maintenance in the future. Dishwasher was about 5 years old GE Profile high-end Read more
Replacement lower rack comb assembly restores proper spacing and support along the dishwasher's lower rack tines, helping keep plates and bowls upright for more consistent cleaning and preventing items from shifting or blocking spray. What it does:
Purchased new tine rows and clips, took 20 minutes to fix. I shouldn't have waited so long! Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.