Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Usually ships within 4 - 14 days
The Spark Module is an OEM part for GE cooktops. Located within the cooktop's control unit, this module is responsible for generating electric sparks to ignite the burners. Consisting of electronic components and wiring, the spark module works with other systems to reliably and safely light the gas or electric burners.
Symptoms of a bad spark module include:
Causes of a failed spark module can be exposure to moisture, dust or debris accumulating inside the control unit over time as well as mechanical or electrical degradation of the ignition components.
This genuine OEM GE replacement part is also compatible with some Kenmore cooktop models that use GE's control systems.
Ordered the correct size drip bowls (All drip bowls have the same outside diameter but different (small, medium or large) inside hole diameters.) Removed 5 knobs by pulling straight up. Removed grate, burner cover, and burner from each of the five burners. Unscrewed two hold down screws from center of each drip bowl. Lifted each drip bowl, pulled wire off the igniter, pushed U-shaped clip off igniter and pulled igniter up thru top of drip bowl, pushed igniter down thru top of new bowl, pushed... Read more
The Spark Switch Assembly is an OEM replacement part for GE gas ranges. It helps ignite gas burners safely during cooking. Includes all five switches and harness
Causes of a bad spark switch assembly can include electrical malfunctions, wear and tear from regular use, or damage from exposure to heat and moisture. Physical damage or corrosion can also impair its functionality.
Symptoms of a bad Spark Switch Assembly include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replaced regulator replaced gasket Read more
Liquid propane
B Burner
Second repair after 10 years of service - igniter had cracked and spill overs were causing the others to misfire. This was a two-step process. I took apart the cooktop to see what parts were neded. Screws were all rusted, I had to drill ome out. The burner gaskets broke during the process and needed replacement. One of the burners had deformed due to excess heat. After that initial diagnose, I reassembled the cooktop without the igniters and ordered all the parts I needed. The second stage was... Read more
This gas valve kit replaces a failed range/oven gas control valve to restore reliable gas flow and ignition control. Designed to match OEM function for safe, consistent burner operation. What it does:
Was able to find a replacement valve through AppliancePartsPros.com. The replacement was straightforward using a few hand tools and once complete after checking for leaks. Read more
Well after looking the issue up on YouTube I first tried the cleaning of the burners no help. So I decided I needed to replace either the harness switch assembly or the spark module. I decided that since I had to remove the glass top and install either and put if all back together before I would know if it worked, I just did both at once since it seemed it had to be one or the other. Got the parts ordered for the correct model, turned off the gas and pulled the top. Took about 90 minutes,... Read more
Black
Push on. Done Read more
Grey
Note: The part is approximately 2-3/8" in diameter.
Note: The part is approximately 4" in diameter.
Refer to Mynor T. of Draper, UT Aug. 12, 2018 write-up. I benefited greatly from the above write-up. It took me a little less time to perform this repair (excluding cleaning the assembly) due to the write-up. This GE Profile gas burner cook top is a “drop-in” model meant to be installed into counter top cut outs. The glass top edges are the actual support area for the entire cook top assembly. The burner bases (on top of the glass top) are screwed to the metal case enclosure (located beneath... Read more
Small
C burner
Took the old ones off and placed the new ones on. Burners lighting correctly once again. Read more
Burner leaking gas or won't light? This gas valve controls fuel flow to your cooktop burners. Requires disassembly of burner bases and cooktop lift-off.
Includes the natural gas orifice
Ordered new glass cook top for GE profile 36" range top. Broke two screws off removing one of the burners. Tried drilling broken 6-32 screws out of cast aluminum gas manifold and broke the tap off inside it so I had to order a new $28 manifold. Total cost with $303 for the glass was $331 Replacement range would have been over $1200. I also replaced all (10) 6-32x1" torx screws with stainless steel versions from McMaster-Carr and installed with Permatex anti seize in case I ever had to open it... Read more