Ce Small Engine On-Off Switch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10211974
This door interlock switch is a safety micro switch that detects whether the microwave door is properly closed before allowing the unit to operate. It is a small, snap-action switch mounted near the door latch mechanism. Replace this switch if the microwave won't start, runs with the door open, or blows a fuse when the door is closed.
Do-It-Yourself Stories from Customers like You
Door latch broke also causing the fuse to blow James M. • Ocean View , NJ • April 28, 2017
It is difficult (if not impossible) to remove the electronic switches from the hard
plastic latches. I replaced all three switches and both the upper and lower latches I also replaced the main 20 amp ceramic fuse which blew out when the latch/switches failed.
Read more
More
$46.35
- Compare At:
-
$55.16
- You Save:
-
$8.81
Genuine Whirlpool part
By: Whirlpool
Part Number: W11457217
Freezer or fridge light not working? Door alarm going off? This door switch detects when doors open/close to control lights. Easy 15-minute fix.
Do-It-Yourself Stories from Customers like You
No freezer light Pedro J. • Kissimmee , FL • May 14, 2018
Ordered the freezer door switch and the light. Replaced the freezer door switch and the light and everything is back to normal. Replaced both in less than 15 min with no problems.
Read more
More
$31.59
- Compare At:
-
$37.91
- You Save:
-
$6.32
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74010824
If your large burner won't heat or stay at the right temperature, the element switch likely needs replacement. Simple 10-15 minute repair with a screwdriver.
Do-It-Yourself Stories from Customers like You
The jennaire stove has a switch with a very poorly designed knob it catches on people's clothes and breaks off Bernard N. • West Linn , OR • December 06, 2016
You have to take the knob off the broken part, then buy the new switch element and fix it. To do this you turn the power off, take out 6 fasteners to release the front panel of the stove and replace the switch element. Then put it all back together. Very simple. But if the knob was designed better it would not have broken in the first place. It looks nice, but this is the third time I have had to fix one.
Read more
More
$78.71
- Compare At:
-
$93.66
- You Save:
-
$14.95
Genuine Frigidaire part
By: Frigidaire
Part Number: 134399700
The Start Switch is an OEM replacement part for Frigidaire dryers. This part initiates the dryer's cycle once the user selects the desired settings. By pressing the start switch, the motor activates, and the drying process begins, ensuring clothes are dried according to the selected specifications.
Symptoms of a bad Start Switch include:
- The dryer not starting when the switch is pressed
- Intermittent starting issues, where the dryer sometimes starts and sometimes doesn’t
- The need to hold the switch in place to keep the dryer running
- Unusual noises when the switch is pressed
Causes for a malfunctioning Start Switch can include electrical issues, such as faulty wiring or connections, wear and tear from frequent use, or internal failures within the switch mechanism that prevent it from signaling the motor to start.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryers.
Do-It-Yourself Stories from Customers like You
Start switch knob broke off. Jeff O. • Laurier , WA • March 07, 2018
I went online, ordered the part and installed it,,, took 15 minutes to install,,,saved huge $$$
easy peasy!! :-)
Read more
More
$77.66
- Compare At:
-
$92.42
- You Save:
-
$14.76
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293827
Burner won't turn on or heat properly? This range burner control switch restores heat level adjustment. Moderate DIY with wiring terminal labels.
Do-It-Yourself Stories from Customers like You
Large burners would go to high when turned on Charles H. • Prestonsburg , KY • October 25, 2016
Replaced infinite switch on large burners and just went ahead and replaced the infinite switch on the small burners while I had it apart and installed all new surface elements as well...parts were shipped the next day and I received them within 2 days...
Read more
More
$80.26
- Compare At:
-
$95.51
- You Save:
-
$15.25
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304505436
Fix E11 error code and washer not filling issues. This pressure sensor switch monitors water levels and signals the control board. DIY repair in under an hour.
Do-It-Yourself Stories from Customers like You
Washer would not let hot or cold water in diagnostic tests. Allowed both hot and cold water in had 120v on 5vdc fill sensor. Wayne K. • Stockbridge , MI • March 21, 2020
Replaced fill sensor and Main control board. Payed next day shipping and washer was up and running an hour after receiving the parts.
Read more
More
$59.48
- Compare At:
-
$70.78
- You Save:
-
$11.30
Genuine Ge part
By: Ge
Part Number: WE4X782
Fix a dryer that won't start or has a broken start knob. This rotary start switch is located in the control panel. Easy 5-10 minute DIY repair.
Do-It-Yourself Stories from Customers like You
Dryer knob broke 8 years ago post finally wore down so it could not be turned with pliers Patrick H. • Saint Albans , VT • December 29, 2014
Ordered parts arrived in two days. Ten minute fix with one wrench. Should have done it years ago.
Read more
More
$72.95
- Compare At:
-
$86.81
- You Save:
-
$13.86
Genuine Whirlpool part
By: Whirlpool
Part Number: W10337780
Washer overfilling or not filling correctly? This water level pressure switch kit fixes fill issues. Includes switch, tube, and clamp. Easy DIY repair.
This part fixes the following symptoms
-
Will not stop filling with water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Washer overfilling David C. • Pine Mtn. Club , CA • May 09, 2014
Reviewed troubleshooting tips and identified problem as "water level switch".
Watched repair video, which was very helpful.
Ordered part on a Sunday, which arrived the following Tuesday.
Repair was easy the fix was successful.
Read more
More
$62.46
- Compare At:
-
$74.33
- You Save:
-
$11.87
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9758060
Burner stuck on high heat or only working at maximum setting? This infinite control switch regulates burner temperature. DIY-friendly, 10-15 minute repair.
Do-It-Yourself Stories from Customers like You
One cooking element would only go on high Aaron H. • Sumas , WA • February 13, 2017
Replaced the switch in the back panel, SUPER easy!!
Read more
More
$65.74
- Compare At:
-
$78.23
- You Save:
-
$12.49
Genuine Samsung part
By: Samsung
Part Number: DA34-00011B
Fix a refrigerator that won't dispense water or ice with this dispenser switch. Requires removing the display cover and disconnecting housing connectors.
Do-It-Yourself Stories from Customers like You
There was no water dispensed and one led was burned out Ralph T. • Fishers , IN • August 15, 2016
I replaced the control board and the microswitch.
Read more
More
$30.76
- Compare At:
-
$36.30
- You Save:
-
$5.54
Genuine Ge part
By: Ge
Part Number: WB23K5027
Burner won't stay at set temperature or jumps to high? The infinite switch controls power to heating elements. Easy DIY repair, takes under 30 minutes.
Do-It-Yourself Stories from Customers like You
Heat plate shorted and blew switch Joseph B. • Hillsdale , NJ • September 29, 2014
Swapped old with new. dead easy and fast delivery of part helped:
good service, thank you .
Read more
More
$108.95
- Compare At:
-
$128.56
- You Save:
-
$19.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3399639
Dryer not heating or stuck on one temperature? This temperature selector switch controls heat settings. Moderate DIY repair with video guide available.
Do-It-Yourself Stories from Customers like You
1 no heat on high or low settings and sometimes on medium heat setting 2 no auto cool down Robert H. • Renton , WA • March 11, 2015
I replaced the cycle switch, fixing the lack of heat. The timer switch replacement fixed the auto cool down. I watched a cycle switch replacement on Youtube, demonstrating removal of the top console, which answered the only question I had about the repair. The timer switch was a hundred bucks. The only thing to be said about that is that it was a lot cheaper than a repairman or replacing the dryer.
Read more
More
$59.48
- Compare At:
-
$70.19
- You Save:
-
$10.71
Genuine Frigidaire part
By: Frigidaire
Part Number: 241554901
Refrigerator interior light won't turn on or stays on? This door light switch controls your fridge lighting. Quick DIY fix with basic tools.
Do-It-Yourself Stories from Customers like You
Light in refrigerator quit working Joseph S. • Wapakoneta , OH • June 27, 2014
Ordered switch....turned out it was the socket that was bad...ordered socket.....quick install....light works
Read more
More
$69.26
- Compare At:
-
$82.42
- You Save:
-
$13.16
Genuine Ge part
By: Ge
Part Number: WB18X23942
If your gas cooktop burners won't ignite or igniters click continuously, the switch harness may be faulty. Moderate DIY repair with basic tools.
Do-It-Yourself Stories from Customers like You
No spark or red led gas cooktop working with a lighter. Devang R. • San Ramon , CA • June 23, 2022
The ordeal began after wiping around burner knobs with a moist paper towel with cleaner and wrapping the towel around the burner knob shaft to clean around it. The cooktop stopped sparking on all the 5 burners and no red LED light. There was gas flow and I could light the burner using a lighter. I looked up and found a couple of good youtube videos on troubleshooting and also came upon the AppliancePartsPros.com site. I opened the cooktop (youtube video helped) after turning off the gas supply...
Read more
More
$46.33
- Compare At:
-
$55.60
- You Save:
-
$9.27
Genuine Ge part
By: Ge
Part Number: WB24X10205
Microwave tripping breaker when door opens or at startup? A failed monitor switch with welded contacts is the likely cause. 30-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Stopped working tripped breaker Roberto M. • Pembroke Pines , FL • March 08, 2019
By replacing the switches.
Read more
More
$56.64
- Compare At:
-
$67.40
- You Save:
-
$10.76
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304504077
Fix i20 or i30 error codes with this dishwasher pressure sensor. Monitors water pressure to prevent overfilling. Common DIY repair for continuous filling.
Do-It-Yourself Stories from Customers like You
If yor fridgidaire dishwasher is showing an i30 error code do not assume there is a leak Kenneth T. • Vineland , NJ • April 24, 2017
I had to pull and clean the pressure sensor switch four times in a year. Each time more gunk accumulated. When that happens the sensor does not close the water valve. The dishawsher keeps filling and the water comes out through the overfill port. The water then goes in the catch basin under the washer and floats the emergency switch. This cuts off the water but keeps the pump running just in case. Tripping the circuit breaker is only a temp fix. What happens is the water level may have...
Read more
More
$94.78
- Compare At:
-
$112.79
- You Save:
-
$18.01