Yard-Main Small Engine Start Switch Parts
Genuine Ge part
By: Ge
Part Number: WE4M255
Fix a dryer timer that won't advance or automatic cycles that stopped working. This timer resistor regulates cycle duration. Easy 15-minute repair.
Do-It-Yourself Stories from Customers like You
Dryer would not shut off at end of any cycle Jeffrey S. • Davis , CA • January 15, 2018
I Replaced the power resistor. The old resistor had a small burnt spot and tested infinity for resistance.The terminals were too small so I had to make new connector. Any 5000 ohm ceramic filled resistor would have worked also.
Read more
More
$34.27
- Compare At:
-
$40.44
- You Save:
-
$6.17
Genuine Ge part
By: Ge
Part Number: WB24T10022
Burner not heating or stuck on? This surface element switch controls power to your cooktop burners. Common repair when heat won't adjust properly.
Do-It-Yourself Stories from Customers like You
Burner didn't work Larry W. • Aiea , HI • March 23, 2014
Replaced the switch infin by watching the video
Read more
More
$106.95
- Compare At:
-
$128.34
- You Save:
-
$21.39
Genuine Ge part
By: Ge
Part Number: WE4X448
The Flame Sensor is an OEM part for GE dryers. This part detects the presence of a flame in gas dryers, ensuring that the gas ignites properly for safe and efficient drying.
Causes of a bad flame sensor can include regular wear and tear, carbon buildup from the gas flame, or electrical malfunctions.
Symptoms of a bad flame sensor include:
- The dryer not heating or taking longer to dry clothes
- The dryer shutting off unexpectedly during a cycle
- The igniter glowing but not igniting the gas
- Error codes related to heating or ignition issues
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Dryer heating for only a short time then no heat at all David N. • Fairfax , CA • December 08, 2018
GE Gas Dryer Model DBVH512GF1WW began to heat for only a short amount of time so drying clothes took WAY too long. Read online that the first thing to replace are the solenoids. Bought the two solenoids from AppliancePartsPros.com for about $50 total, and it seems to have fixed the problem. Had to watch a few videos to learn to disassemble the dryer, and the job took a couple of hours, but now that I know what I'm doing it could be done in less than 30 minutes.
Also, the old solenoids tested...
Read more
More
$79.95
- Compare At:
-
$95.14
- You Save:
-
$15.19
Genuine Whirlpool part
By: Whirlpool
Part Number: 8193506
Dishwasher leaking from underneath? The float switch kit controls water level and stops overfilling. Typical repair time 10-30 minutes.
Do-It-Yourself Stories from Customers like You
Kitchenaid dishwasher kudp02frss2 leak at float switch at front right of unit Richard B. • Mahwah , NJ • December 02, 2016
Removed bottom cover, located leak at float switch, removed and replaced float switch kit.
The toughest part of the repair was removing the Float & Retainer Assembly (in the interior of the machine tank) which broke when I pushed it back and pulled it straight up as suggested in the service manual. The Float Switch Kit (attached to, and below the float, below and outside the tank) has a folding plastic cover which fastens with plastic clips. If you open the switch kit before removing the...
Read more
More
$92.63
- Compare At:
-
$109.30
- You Save:
-
$16.67
Genuine Ge part
By: Ge
Part Number: WB24X10146
The Micro Switch is an OEM part for GE microwaves. This part ensures the appliance operates only when the door is securely closed. It controls the electrical circuit, allowing the microwave to start heating food when the door latch engages the switch.
Causes of a bad micro switch can include wear and tear from frequent use, electrical issues, or physical damage from slamming the microwave door.
Symptoms of a bad micro switch include:
- The microwave not starting or stopping unexpectedly
- The microwave running even with the door open
- Intermittent power issues
- The door not latching or the microwave indicating the door is open
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Stopped working tripped breaker Roberto M. • Pembroke Pines , FL • March 08, 2019
By replacing the switches.
Read more
More
$42.33
- Compare At:
-
$50.37
- You Save:
-
$8.04
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9759474
Burner stuck on high heat or won't regulate temperature? This infinite switch controls heat levels on your cooktop. DIY repair in 20-30 minutes.
Do-It-Yourself Stories from Customers like You
One of the burners would stay on max heat no matter what heat setting was selected Ismael C. • Amherst , OH • March 14, 2015
I replaced the Infinite switch on the cooktop panel and that corrected the problem.
Read more
More
$82.95
- Compare At:
-
$98.71
- You Save:
-
$15.76
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10563095
Dryer won't start when you press the button? This push to start switch initiates the motor and heating element. Simple 5-minute DIY replacement.
Do-It-Yourself Stories from Customers like You
Would not start Charles Y. • Auburn , NY • June 19, 2018
Replaced the start s/w
Read more
More
$63.65
- Compare At:
-
$75.74
- You Save:
-
$12.09
Genuine Whirlpool part
By: Whirlpool
Part Number: 700855K
Fix burners that won't turn on or heat up with this burner switch kit. Includes mounting hardware and instructions. Easy 30-minute DIY repair.
This part fixes the following symptoms
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
The burner switches were not controlling the burners correctly specifically the lo temps were too high the switch knobs were also worn Frank C. • Sunset Beach , NC • December 24, 2019
1) I installed 4 ea new Whirlpool 700855K switches. (The old switches had INF-240P-871 stamped on them. 700855K was the cross-referenced P/N.)
The installation was easy. There is slight difference in the terminal arrangement: 1) the old switch has raised terminals whereas the new switch has recessed terminals (for safety), and 2) the terminal markings are slightly different: The old switch has L1/L2/P/H1/H2 (5 terminals). The new switch has L1/L2/P/HC/H1(Also five terminals. I saw where one...
Read more
More
$84.40
- Compare At:
-
$100.44
- You Save:
-
$16.04
Genuine Whirlpool part
By: Whirlpool
Part Number: W10439651
The Drive Motor is an OEM part for Whirlpool washing machines. This part powers the agitator and spinning the drum, facilitating the various cycles of the washing machine to ensure clothes are thoroughly cleaned.
Causes of a bad drive motor can include general wear and tear over time, overheating, electrical issues, or mechanical failures within the motor components.
Symptoms of a bad Drive Motor include:
- Washing machine not agitating or spinning
- Loud or unusual noises during operation
- Burning smell coming from the motor
- Washer stopping mid-cycle or not starting at all
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
25 year old trash compactor motor quit working Robert O. • Pace , FL • May 18, 2014
Replaced the motor with a direct replacement part. The wiring was not the same because the switch on the motor was different. The instructions that came with the motor were enough for me to figure out what to do.
Read more
More
$201.50
- Compare At:
-
$239.78
- You Save:
-
$38.28
Genuine Frigidaire part
By: Frigidaire
Part Number: 241707701
Compressor won't start or rattles? This start relay enables the compressor to begin the refrigeration cycle. DIY-friendly repair, typically done in under an hour.
Do-It-Yourself Stories from Customers like You
Running but not cooling Aaron R. • Malakoff , TX • June 12, 2016
Looked up possible causes on line and found video about trouble shooting. It said to check starter cap and run relay on side of compressor.
Removed both and found both were bad .ordered replacements on line from appliancePartspros.com.
Installed new parts and is working properly. This repair job was on a 2012 Frigidaire refrig.
You would think a refrig. Would last longer than 4 years. The original parts and the replacement parts were light weight and cheaply made.
I'll probably be doing this...
Read more
More
$65.24
- Compare At:
-
$77.64
- You Save:
-
$12.40
Genuine Lg part
By: Lg
Part Number: 6750C-0005P
Fridge won't cool or clicks on and off? The overload protector prevents compressor damage from overheating. Easy 30-minute DIY fix for most models.
Do-It-Yourself Stories from Customers like You
Refridgerator stopped cooling Gary S. • Madison , WI • April 13, 2015
Replaced the Thermistor Assembly and also picked up Overload Protection circuit per the comments posted by the "experts" on the web site. Both parts cheap enough. I ordered parts at 3:30 in the afternoon and they showed up the next morning from half way across the country. Outstanding service. It also fixed the 9 year old refrigerator. Replacing the parts took about a half hour most of which was moving the unit from the wall and removing the panel to get at the parts.
Read more
More
$30.95
- Compare At:
-
$36.83
- You Save:
-
$5.88
Genuine Whirlpool part
By: Whirlpool
Part Number: W10211974
This door interlock switch is a safety micro switch that detects whether the microwave door is properly closed before allowing the unit to operate. It is a small, snap-action switch mounted near the door latch mechanism. Replace this switch if the microwave won't start, runs with the door open, or blows a fuse when the door is closed.
Do-It-Yourself Stories from Customers like You
Door latch broke also causing the fuse to blow James M. • Ocean View , NJ • April 28, 2017
It is difficult (if not impossible) to remove the electronic switches from the hard
plastic latches. I replaced all three switches and both the upper and lower latches I also replaced the main 20 amp ceramic fuse which blew out when the latch/switches failed.
Read more
More
$46.35
- Compare At:
-
$55.16
- You Save:
-
$8.81
Genuine Lg part
By: Lg
Part Number: 0CZZJB2014L
This run capacitor provides the continuous electrical boost needed to keep the refrigerator's compressor motor running efficiently. It stores and releases energy to maintain the proper phase and voltage for the compressor during normal operation. Replace this capacitor if the compressor struggles to start, hums without running, shuts off intermittently, or if the refrigerator stops cooling altogether.
Do-It-Yourself Stories from Customers like You
Lg refrigerator compressor would intermittantly hum and shut down but then start normally minutes later Don C. • Pearland , TX • July 23, 2016
After watching repair videos, I decided I could order the parts needed and do it myself for less than a service call, not to mention the additional cost for parts markup and installation that a service technician would charge. I am very pleased that I did. I ordered the start relay, overload and capacitor with some help from Ilya at customer service to make sure I was getting the correct replacements. Installation was easy. The hardest thing was contorting my body into a position where I could...
Read more
More
$51.21
- Compare At:
-
$61.45
- You Save:
-
$10.24
Genuine Ge part
By: Ge
Part Number: WB24T10058
Burner stays on high or won't turn off completely? This infinite control switch regulates surface burner heat. Simple 10-minute DIY fix with video guide.
Do-It-Yourself Stories from Customers like You
Bad burner switch James C. • Augusta , NJ • January 04, 2015
I first checked a repair video and found the procedure was a 10 minute job. I then went to the website, put in my stove model number and searched for the switch. While I was looking I was offered a chat session with one of their experts. I am glad that I accepted. The switch I was looking at was not the right switch for the job. My expert verified my model number and the switch that need to be replaced. After a couple of minutes, she came back with the right part and placed the order for...
Read more
More
$96.95
- Compare At:
-
$114.40
- You Save:
-
$17.45
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10312185
Burner stuck on high heat or won't regulate temperature? This infinite switch restores precise control. Straightforward DIY repair with a screwdriver.
Do-It-Yourself Stories from Customers like You
Bad oven knob sensor was causing circuit breaker to trip Kelly V. • Rockaway , NJ • December 27, 2019
Replacing the oven knob sensor was easy. Figuring out it was the sensor causing the circuit breaker to trip was the challenge.
Read more
More
$87.35
- Compare At:
-
$104.82
- You Save:
-
$17.47
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293827
Burner won't turn on or heat properly? This range burner control switch restores heat level adjustment. Moderate DIY with wiring terminal labels.
Do-It-Yourself Stories from Customers like You
Large burners would go to high when turned on Charles H. • Prestonsburg , KY • October 25, 2016
Replaced infinite switch on large burners and just went ahead and replaced the infinite switch on the small burners while I had it apart and installed all new surface elements as well...parts were shipped the next day and I received them within 2 days...
Read more
More
$75.95
- Compare At:
-
$90.38
- You Save:
-
$14.43