Leak Blower Regular Starter Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8543274
Dryer won't start when you press the button? This push-to-start switch closes the circuit to begin cycles. Easy DIY repair restores reliable starting.
Do-It-Yourself Stories from Customers like You
Start switch replacement George Z. • Sebastian , FL • December 14, 2020
I have an old dryer. My wife wanted a new washer and dryer but I keep repairing the old ones. Not because I have to, but because I want to, it's personal now. Can't let my old dryer beat me down. We have pushed that old Start-Stop switch so many times it just wore out. Bing-bang-boom...it was simple.
Read more
More
$56.34
- Compare At:
-
$67.61
- You Save:
-
$11.27
Genuine Bosch part
By: Bosch
Part Number: 00497756
This OEM replacement part is a motor assembly for ovens. The motor assembly is the main motor that powers the oven fan which is responsible for maintaining and adjusting the temperature in an oven. If the oven is no longer heating properly, turning on, or maintaining temperature, then the motor assembly will need to be replaced.To replace this part, make sure that the oven is unplugged. After it has been powered off, proceed to pull the oven out and away from the wall. Once moved, uninstall the back panel of the oven by removing the panel's mounting screws. After detaching the back panel, locate the motor housing on the back of the oven. Unthread the screws that hold the housing in place. Once removed, locate the mounting brackets that hold the motor in place and remove the screws that attach to the motor. Pull the old motor out of its place and install the new motor. Reinstall the back panel and restore power to the appliance.This genuine replacement part is sold individually and is compatible with Bosch, Gaggenau, and Thermador brand ovens.
More
$232.95
- Compare At:
-
$277.21
- You Save:
-
$44.26
Genuine Lg part
By: Lg
Part Number: EBF61734701
This micro switch is a compact, snap-action electrical switch that sends an on/off signal when a lever, latch, or paddle is moved. Replacing a worn switch restores reliable detection and control response for the affected function.
- Converts mechanical movement into an electrical open/close signal to the control
- Commonly used for lever/paddle actuators, latches, or interlock detection within the appliance
- Safe symptom clues: no response when actuated, intermittent operation, or a function stuck on/off
- Physical clues: weak or absent "click" when pressed, heat discoloration or damage at terminals
What's included: 1 micro switch
- Disconnect power before servicing; if the product is connected to a water line, close the supply valve
- Note wire positions and terminal labels (COM/NO/NC); transfer wires one at a time to matching terminals
- Match the actuator orientation and mounting position to the original for proper operation
- After installation, verify continuity with a multimeter and test function before reassembly
Do-It-Yourself Stories from Customers like You
Sensor on dryer and refridgeator bad Perry S. • Jackson , TN • November 14, 2015
Take section applicable apart, test and replace parts.
Read more
More
$21.72
- Compare At:
-
$26.06
- You Save:
-
$4.34
Genuine Ge part
By: Ge
Part Number: WB26K5069
Fix a convection fan that won't turn or hums but doesn't spin. This motor restores proper convection cooking. Moderate DIY repair with basic tools.
Do-It-Yourself Stories from Customers like You
The convection fan on my ge profile convection wall oven burned out Doug C. • Staunton , VA • February 18, 2015
The motor hummed but the fan didn't turn. Clearly the brushes were burned out. I ordered a new fan, although I had to talk to a human at ApplianceParts because my model was not listed. The part was a perfect fit. The only problem is determining how to remove the over to reach the back, no instructions anywhere online. But trial and error eventually worked. You absolutely need a nut-driver that fits the hex head screws on the oven to remove panels covering the motor, but a cheap...
Read more
More
$182.30
- Compare At:
-
$218.76
- You Save:
-
$36.46
Genuine Ge part
By: Ge
Part Number: WB26T10041
This tangential blower moves cooling air through the appliance to protect internal components and the control area from excess heat. Replace a noisy or non-running fan to restore proper airflow and safe operating temperatures. What it does
- Circulates air across the appliance cavity and control compartment during and after heating cycles
- Helps prevent over-temperature shutdowns and protects electronic controls
- Reduces heat at the control panel and vent area
- Common symptoms: fan won't run, runs intermittently, or makes loud scraping/rumbling noises
What's included
Install notes
- Disconnect power and allow the appliance to cool completely before servicing
- Access location varies by model; document wire connections and mounting orientation before removal
- Transfer any brackets, screws, or insulation from the original part if needed
- The fan spins freely and matches the original airflow direction before reassembly
Do-It-Yourself Stories from Customers like You
GE Profile range display dead after self cleaning. Lance C. • Wooster , OH • May 07, 2022
Replaced the thermal limit switch and blower.
The blower had been getting noisy lately and was most likely the cause of the limit switch blowing. Upon removal of the blower it was very stiff when turning by hand. Easy to change the blower - disconnect the power, open the back of the range and three Phillips screws hold the blower in place.
Replacing the limit switch was a different story. First, as the limit switch blew during cleaning the oven door was locked shut. With the display dead,...
Read more
More
$93.95
- Compare At:
-
$111.80
- You Save:
-
$17.85
Genuine Ge part
By: Ge
Part Number: WR8X122
Compressor won't start or kicks out after trying? This overload protector prevents motor damage. DIY-friendly repair, takes about 30 minutes to replace.
Do-It-Yourself Stories from Customers like You
Cooling fan runs but compressor tries to start and kicks out Dave F. • Painesville , OH • November 10, 2015
I read alot of blogs about the same similar symptom, but none described by exact problem. I kept reading how the compressor relay would make a click noise or sisal. I also found out the overload switch could cause a like symptom. The end result being that upon removal of the relay, it was discolored and made a rattling noise when shook. The overload switch was heat cracked on the plastic and looked like it had had enough. This was easily accomplished by using the repair mans print out for the...
Read more
More
$53.95
- Compare At:
-
$63.66
- You Save:
-
$9.71
Genuine Frigidaire part
By: Frigidaire
Part Number: 318575603
Fix grinding or buzzing fan noise during preheat or cool-down. This motor restores proper airflow in your oven. Moderate DIY, 30-60 minutes.
Do-It-Yourself Stories from Customers like You
Kenmore convection stove top fan noise Curtiss M. • Garrison , ND • November 04, 2018
Real well—- lots of screws and wires to disconnect
Read more
More
$127.27
- Compare At:
-
$150.18
- You Save:
-
$22.91
Genuine Ge part
By: Ge
Part Number: WB26X172
Fix a microwave turntable that won't rotate, stalls, or makes grinding noises. This motor spins the glass tray for even heating. DIY repair in 10 minutes.
Do-It-Yourself Stories from Customers like You
Microwave turntable woudl not work Anthony R. • Costa Mesa , CA • November 05, 2016
Replace motor, 10 minute fix. No problems!
Read more
More
$84.95
- Compare At:
-
$101.94
- You Save:
-
$16.99
Genuine Ge part
By: Ge
Part Number: WE4M406
Dryer won't shut off in auto dry or only heats on one setting? This temperature switch restores proper heat level control. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Temperature switch wasn't working on medium and high Thomas H. • Coquille , OR • January 19, 2017
Replaced temp switch
Read more
More
$90.95
- Compare At:
-
$127.84
- You Save:
-
$36.89
Genuine Ge part
By: Ge
Part Number: WR60X25785
This evaporator fan blade mounts on the fan motor and circulates cold air across the evaporator coils and throughout the compartments. Replacing a cracked, warped, or loose blade restores proper airflow and stable temperatures.
- Moves air across the evaporator to distribute cooled air evenly
- Helps maintain consistent refrigerator and freezer temperatures
- Common symptoms include weak or no airflow, warm spots, frost buildup on the evaporator cover, and rattling/scraping noises
- Replace if the blade is damaged or spins loosely on the motor shaft
What's included: 1 evaporator fan blade Install notes:
- Disconnect power before servicing
- Remove shelves/bins and the rear evaporator cover to access the fan
- Note blade orientation and seating depth; pull the old blade straight off the motor shaft
- Press the new blade on until fully seated; verify free spin and proper clearance before reassembly
Do-It-Yourself Stories from Customers like You
Evaporator fan blades broke. Michael G. • Eastborough , KS • January 09, 2021
Ordered a new fan.
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Frigidaire part
By: Frigidaire
Part Number: 318575600
This is the cooling fan motor that draws air across the oven cavity and control panel area to prevent overheating of surrounding cabinetry and electronic components. It typically runs during and after oven use to dissipate heat. Replace this motor if the oven shuts off unexpectedly due to overheating, the cooling fan does not spin, or you notice excessive heat around the control panel or cabinet surfaces near the range.
Do-It-Yourself Stories from Customers like You
Cooling fan on slide in Electrolux range making loud noise Michael D. • Marshall , NC • February 03, 2019
Simple fix. Power off, remove 14 screws, lift top (use wood blocks to hold), unplug white and black wires from fan motor, twist motor assembly counter clockwise and lift to remove. Take new fan motor and do steps in the reverse. Worked like a champ. NOTE: First part arrived in 2 days but fan was shattered, called Appliancepartspro at 4 PM and had a replacement delivered before 11 AM the next day. Awesome response and customer service.
Read more
More
$187.67
- Compare At:
-
$221.45
- You Save:
-
$33.78
Genuine Ge part
By: Ge
Part Number: WB26X36106
Fix a microwave vent fan that won't remove smoke or steam with this ventilation motor. Restores proper airflow to clear cooking odors effectively.
Do-It-Yourself Stories from Customers like You
Exhaust fan would work intermittently Mark W. • Pearland , TX • September 15, 2019
I replaced the exhaust fan. It works like a brand new machine now.
Read more
More
$85.39
- Compare At:
-
$102.47
- You Save:
-
$17.08
Genuine Frigidaire part
By: Frigidaire
Part Number: 241707712
Refrigerator won't cool or compressor won't start? This compressor start relay energizes the start winding to restore cooling. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Starter Charles S. • Lithonia , GA • November 25, 2019
Replaced starter and compressor run capacitor.
Read more
More
$66.41
- Compare At:
-
$78.36
- You Save:
-
$11.95
Genuine Ge part
By: Ge
Part Number: WB26K10004
Fixes oven convection fan not working or uneven baking. This single-speed motor circulates hot air for consistent temperatures. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Convection fan in oven not working Jeff A. • Aurora , IL • January 17, 2017
Ordered fan assembly. Not difficult to install at all. Remove the back cover, remove the fan cover inside the oven, remove the motor/fan assembly and put it all together. Easy.
Read more
More
$166.71
- Compare At:
-
$196.72
- You Save:
-
$30.01
Genuine Ge part
By: Ge
Part Number: WB26X10037
Fixes loud grinding or coffee grinder noise from microwave. Simple DIY repair with 2 screws and wire connectors. Located on top, typically takes under 30 minutes.
Do-It-Yourself Stories from Customers like You
Noisy microwave stirrer motor Gary H. • Manteo , NC • June 05, 2016
I opened up the microwave where the noise was coming from. I searched the web to confirm this part could be failing and found the part name and number on appliancepartspros.com. I ordered the part on Monday and it was in my mailbox 2 days later. Two screws and two wire connectors later and the old one was out. I installed the replacement part and everything worked great, no more grinding noise.
Read more
More
$17.95
- Compare At:
-
$79.57
- You Save:
-
$61.62
Genuine Ge part
By: Ge
Part Number: WB26X32994
Fixes a microwave turntable that won't spin, stalls, or makes noise. Includes mounting gasket for smooth rotation. Easy to install in 30 minutes.
Do-It-Yourself Stories from Customers like You
Microwave would power on, but no heat. Mike P. • Monument , CO • April 29, 2022
I took the advice of another buyer and replaced the magnetron, capacitor, and diode from my microwave (make sure you discharge the capacitor). It was not a problem at all to do, I did find an excellent video on YouTube on how to test all of these components and almost anything else in a microwave. It’s called Microwave Oven Troubleshooting in Minutes- Step by Step by electronicsNmore. It was the best thing I watched. Turns out my magnetron was the only thing that was bad and it’s the most...
Read more
More
$63.65
- Compare At:
-
$76.38
- You Save:
-
$12.73