Circuit Board Parts

This electronic control board is the appliance's central controller, interpreting your selections and directing power to run each cycle. Replacing a failed board can restore operation when the console is dead, unresponsive, or cycles won't start or advance.

• Coordinates cycle timing and executes user-selected programs
• Switches power to components via on-board relays/triacs
• Monitors inputs/sensors and reacts to faults
• Common failure symptoms: no power/display, won't start, unresponsive buttons/knob, erratic lights or beeping, cycle won't advance

• Disconnect power before servicing; verify no voltage is present
• Use ESD precautions; handle the board by edges only
• Transfer any mounting brackets, screws, or decorative overlays from the original as required
• Reseat all connectors firmly; after install, run a test/diagnostic or a normal cycle to confirm operation

The Dishwasher Control Board is an OEM part for Frigidaire dishwashers. It is the central component responsible for operating and controlling all functions of the dishwasher. 

Causes of a bad control board can include moisture damage, short circuits, or normal aging of electronic parts over time. 

Symptoms of a bad control board include:

• The dishwasher not starting or functioning properly
• Lights flashing in unintended patterns  
• Inability to select desired wash cycles
• Issues with dispensing detergent or rinse aid

This OEM Frigidaire replacement control board provides genuine functionality and performance. It is also compatible with some Electrolux, Gibson, and Kenmore dishwashers.

The Main Control Board Assembly is an OEM part for GE refrigerators. This part manages and regulates various functions of the refrigerator, including temperature control, defrost cycles, and the operation of the compressor and fans.

Causes of a bad main control board can include electrical surges, overheating, or component failures due to age or manufacturing defects. 

Symptoms of a bad main control board include:

• Refrigerator not cooling properly
• Erratic temperature fluctuations
• Unresponsive control panel
• Frequent cycling on and off
• Unusual noises from the refrigerator

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Control Board is an OEM part for Whirlpool dishwashers. This essential electronic component manages and regulates various dishwasher functions, including wash cycles, temperature settings, and timing. 

Over time, the control board can fail due to power surges, electrical shorts, or wear and tear. Exposure to moisture or excessive heat can also damage its electronic components, leading to malfunctions.

Symptoms of a bad control board include:

• The dishwasher not powering on
• Error codes displayed on the control panel
• Unresponsive buttons or controls
• Irregular or incomplete wash cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Electronic Control Board is an OEM part for Whirlpool dishwashers. It manages and regulates the dishwasher's various functions, including the wash cycles, water temperature, and timing.

You should replace the electronic control board if it becomes faulty. Causes of a bad control board can include electrical surges, moisture damage, or wear and tear over time. These factors can lead to malfunctioning or failure of the control board, impacting the dishwasher's performance.

Symptoms of a bad electronic control board include:

• Dishwasher not starting or stopping mid-cycle
• Inconsistent wash cycles
• Error codes displayed on the control panel
• Failure to properly heat water or drain

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dishwasher Configured Service Machine Control Board is an OEM replacement part for GE dishwashers. It serves as the central control unit, managing and regulating various operations and functions of the dishwasher.

Symptoms of a failing dishwasher service machine control board include:

• The dishwasher not powering on or responding to any input commands
• Incomplete or interrupted wash cycles
• Indicator lights or displays malfunctioning or displaying error codes
• Specific components like the water inlet valve or drain pump not functioning properly

Causes of a bad service machine control board can include electrical malfunctions, power surges or electrical spikes, physical damage from impact or moisture intrusion, or simply wear and tear over extended use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.

The Control Board Assembly is an OEM part for GE refrigerators. This part manages and coordinates various functions of the refrigerator, such as temperature regulation, defrost cycles, and the operation of the compressor and fans.

Causes of a bad control board assembly can include electrical surges, wear and tear over time, or damage from moisture and condensation. 

Symptoms of a bad control board assembly include:

• Inconsistent temperature regulation
• The refrigerator not cooling or freezing properly
• Error codes or display malfunctions
• Unusual noises from the refrigerator

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Encoder Board is an OEM part for LG ovens. This board is responsible for interpreting the inputs from the control knobs and buttons on the oven's control panel. It sends these signals to the main control board, which then adjusts the oven settings accordingly, such as temperature and cooking mode.

Causes of a bad encoder board can include electrical surges, wear and tear from frequent use, or physical damage to the board's components. A malfunctioning encoder board can disrupt the communication between the user interface and the oven's control system.

Symptoms of a bad encoder board include:

• Unresponsive control knobs or buttons
• Incorrect oven temperature settings
• Oven not starting or turning off unexpectedly
• Error codes displayed on the control panel

This OEM LG part is also compatible with Sears/Kenmore.

The LED Power Board is an OEM replacement part for Whirlpool refrigerators. It functions as the central hub that powers the LED lights within the appliance, ensuring the interior is well-lit for easy visibility. The board is designed to efficiently distribute power to the LEDs, contributing to the refrigerator’s energy efficiency and the longevity of the lights.

Symptoms of a bad LED Power Board include:

• Flickering or dim interior lights
• Lights not turning on when the refrigerator door is opened
• Unusual buzzing or electrical sounds
• Error codes or signals related to the lighting system

Causes for a malfunctioning LED Power Board can include electrical surges, component wear over time, or issues with the connections or wiring.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This refrigerator control board is the central electronic module that manages key appliance functions for consistent temperatures and dependable operation. A failed board can cause no-cool conditions, unstable temperatures, or unresponsive controls; replacing it restores proper function. What it does:

• Interprets inputs from temperature sensors and user settings to run the appliance correctly
• Distributes power to components through relays and connectors
• Coordinates cooling and, on applicable models, defrost and fan operations
• Common failure signs can include no or intermittent cooling, warm temperatures, frost buildup, clicking from the control area, or unresponsive controls

• 1 control board

• Disconnect power to the refrigerator before servicing
• Use ESD precautions; handle the board by the edges only
• Photograph wiring; move connectors one at a time, ensuring keyed orientation and full seating
• After reassembly, restore power and allow up to 24 hours for temperatures to stabilize

The Washing Machine Control Board Assembly is essential for maintaining the functionality of your Samsung washer. This main PCB assembly ensures precise control over your washing cycles, providing reliable performance every time. Designed as a genuine OEM part, it guarantees compatibility and seamless integration with your Samsung appliance. By replacing a faulty control board with this high-quality assembly, you can restore your washerGÇÖs operations without the need for a complete replacement. Key features include durable circuitry that withstands regular use and accurate signal processing for efficient washing. Installing this control board assembly can help prevent errors and improve the overall efficiency of your washing machine. Whether your washer is experiencing cycle interruptions, display issues, or other electronic malfunctions, the Washing Machine Control Board Assembly offers a dependable solution. Trust in genuine OEM parts to extend the life of your Samsung washer and ensure optimal performance.

This timer is the appliance's cycle controller. It routes power to the right components in a programmed sequence and advances the cycle at the correct intervals, restoring proper progression and reliable start/stop of functions when the original fails.

• Advances the machine through each step and duration selected
• Opens and closes internal contacts to power motors, heaters, and valves as designed
• Interfaces with the control knob/shaft for user-selected settings
• Common symptoms: cycle won't advance, timer doesn't move, stuck mid-cycle, or runs indefinitely

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Note wire locations and transfer one wire at a time to the matching terminals on the new timer
• Reuse existing mounting hardware and control knob/shaft parts as applicable
• After installation, run a short test cycle to confirm the timer advances correctly

The Electronic Control Board is an OEM part for Whirlpool washing machines. It manages and regulates the washer's functions, including the wash cycles, water levels, and temperature settings. The control board ensures that the washer operates efficiently and correctly by processing user inputs and coordinating various components.

Causes of a bad electronic control board can include electrical surges, moisture damage, or component wear over time.

Symptoms of a bad electronic control board include:

• Washer not starting or completing cycles
• Displaying error codes
• Inconsistent or incorrect wash cycles
• Unresponsive control panel

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Controller is an OEM part for Frigidaire ranges. This part manages the oven's electronic functions, including temperature regulation, cooking modes, and timer settings, ensuring precise and reliable cooking performance.

Common causes of a bad controller include electrical surges, wear and tear of electronic components, or damage due to excessive heat or moisture.

Symptoms of a bad Controller include:

• Inaccurate temperature settings or fluctuations
• The oven not heating up or shutting off unexpectedly
• Error codes or malfunctioning display
• Unresponsive buttons or controls

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This main electronic control board (PCB assembly) manages and coordinates your appliance's functions. Replacing a failed board can restore reliable power distribution and control of motors, valves, and other components, helping resolve no-power and erratic-operation issues.

• Directs power and timing to motors, heaters, fans, valves, and lights based on inputs from sensors and the user interface
• Interprets sensor feedback and can shut down components when faults are detected
• Failure symptoms include no power or no start, unresponsive controls or display, cycles that won't advance, intermittent shutdowns, or error codes
• May present as loads not running when commanded or visible board damage (burn marks or stuck relays)

• Disconnect power at the breaker or unplug the appliance before servicing
• Use ESD precautions; handle the board by the edges and avoid touching components or traces
• Photograph wiring and move connectors one at a time to the matching positions on the new board
• Secure the board and ensure all harnesses are fully seated; perform any model-specific reset/initialization per the service manual

The Defrost Control Board is an OEM part for Frigidaire refrigerators. This board manages the defrost cycle by controlling the activation of the defrost heater and the monitoring of the freezer's temperature. 

Over time, the defrost control board can fail due to electrical issues, wear from continuous use, or damage from power surges. 

Symptoms of a bad defrost control board include:

• Excessive frost buildup in the freezer compartment
• The refrigerator not cooling properly
• The defrost heater not activating
• Frequent cycling on and off of the refrigerator

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.