Pump Parts

I replace the motor. Got the new motor in. Works Great now! Thanks! Read more

At first, I felt there was a problem with the drain hose. Possibly water would not completely drain out due to a poor routing of the drain hose. It seemed fine - I ensured that I had a 32-ince rise and then a good down hill route to the drain. My drain hose does not drain into the garbage disposal. Then I ran a series of manual relay checks for each component. I had replaced the level sensor sometime in the past; so, I figured that was functioning properly. Why would the rinse cycle seem... Read more

Found dryer portion I let plastic had failed to keep seal. Ordered new blower assembly and inlet cap. Gasket comes with blower. Read more

• Will not drain

Ordered a replacement. Had to tip washer toward the back to provide access underneath to the pump. Had some difficulty removing the two hose clamps. Pliers were not the best tool. Had to ensure the drive belt was properly engaged with the pulley of the pump. Read more

1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve. Parts $220 for Dishwasher Estimated Labor $400.00 Labor $0.00 Parts $100.00 for Pullout Faucet Estimated Labor $175.00 Labor $0.00 Read more

I ordered new racks, volute and check ball, and new spray arms. Replacing the volute and check ball were the hardest things to do and they were fairly easy to change. The toughest part for me was finding my T15 torxdriver. After replacing these parts the washer operates much better with much higher pressure than what we were experiencing recently. Read more

I did it myself. I replaced the impeller. It took me about three hours to do it Read more

• Noisy
• Leaks water

After ordering two pump kits and thinking I had still had the wrong pump I read how other customers fixed the problem. Forget about the pump going back in the same location. It mounts to the bottom of the frame not to the bottom of the tub as it came from the manufacturer. In my case there were mounting holes already there to accept the new pump bracket. The new hoses will reach the bottom of the tub and outlet. Fast and easy repair once I sorted through the changes. I hope other Samsung... Read more

I ordered and replaced the 2 possible items that I believed could be the cause. Unit now operates correctly. Read more

The dishwasher would fill with water, and then was silent (during the time you'd expect to hear it washing. Cancel/draining worked fine too. I assumed it was the pump/motor that had failed. The dishwasher was barely 2 years old. The repair was relatively simple. I removed the racks and spinners from inside the dishwasher. I turned off power to the unit and removed the hoses. I found it easiest to pull the dishwasher out of it's space and flip it on its belly so that I could get to the... Read more

Replaced pump and motor. Read more