Run Vent Push Button Switch Parts
Genuine Ge part
By: Ge
Part Number: WH12X10065
Fix a washer that overfills or won't start the wash cycle. This water level pressure switch detects proper fill levels. DIY-friendly repair.
This part fixes the following symptoms
-
Will not fill with water
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Bad switch Daniele H. • Milford , CT • February 12, 2015
Hmm...watched video after reading on web of running water problem with GE washer....common fail
.....moving stuff to get to the washer took all the time, easy fix but a lot of screws to remove and looking time
APP site very good, will order again if need be thanks
Read more
More
$50.95
- Compare At:
-
$61.14
- You Save:
-
$10.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8541818
The heater box houses your dryer's heating element and screen. Replace this component when rusted, corroded, or the screen is damaged causing snags or stains.
Do-It-Yourself Stories from Customers like You
The grill face in the dryer where the heat comes out was worn and had developed edges where clothes were catching and pulling thread Willard W. • Rochester , NY • April 06, 2017
Replaced the heater tube. Had to open the back up, removed the heating element and then replaced the heater tube. Then I put it all together again and everything is fine now.
Read more
More
$129.68
- Compare At:
-
$153.02
- You Save:
-
$23.34
Genuine Lg part
By: Lg
Part Number: ACJ73350401
Connects water inlet valve to tub in your washer. Replace if cracked, leaking, or ports are stripped. Ensures secure, leak-proof connection during cycles.
Do-It-Yourself Stories from Customers like You
Water was leaking into the tub of the washing machine. Shawn F. • Apache Junction , AZ • January 10, 2021
We watched the video on how to fix the problem. Ordered the parts and they came very quickly. My husband was able to repair the washer without any problems or complications. We are thrilled that we could solve the problem by using your parts and avoid buying a new washer. Thank you!
Read more
More
$17.95
- Compare At:
-
$21.36
- You Save:
-
$3.41
Genuine Ge part
By: Ge
Part Number: WD21X23498
The Flood Switch is an OEM part for GE dishwashers. This critical component detects and prevents potential overflows by monitoring water levels within the dishwasher. When excessive water is detected, the flood switch signals the dishwasher to shut off water flow, preventing leaks and potential water damage.
Causes of a bad flood switch can include electrical failures, physical damage from debris, or wear and tear from repeated use. If the flood switch malfunctions, it may not properly detect water levels, leading to possible overflows or improper operation of the dishwasher.
Symptoms of a bad flood switch include:
- The dishwasher stopping mid-cycle
- Water not filling or overfilling the dishwasher
- Error codes related to water level issues
- Leaks around the dishwasher
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The dishwasher was not draining water. Sanford S. • Jericho , NY • January 23, 2022
Spoke to an appliance repairman who said it does not pay to fix and is too difficult
I had already ordered the parts.
So I called AppliancePartsPros.com.
They said no problem if I wanted to return parts
BUT the technician suggested that all appliances are repairable
I gave it a shot
I had to disconnect the dishwasher, same as if I was to replace it
Followed on AppliancePartsPros.com repair parts video and replaced the pump, inlet valve, and solenoid
all took about an hour and the dishwasher...
Read more
More
$11.54
- Compare At:
-
$13.73
- You Save:
-
$2.19
Genuine Ge part
By: Ge
Part Number: WR23X29161
The Door Light Switch is an OEM part for GE refrigerators. It is designed to control the interior light of the refrigerator, turning it on when the door is opened and off when the door is closed.
Causes of a bad door light switch can include wear and tear over time, electrical malfunctions, or physical damage from regular use. A faulty switch can lead to improper functioning of the refrigerator light, impacting visibility inside the unit.
Symptoms of a bad Door Light Switch include:
- Refrigerator light not turning on or off correctly
- Light flickering or remaining dim
- Light staying on even when the door is closed
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
No ice no water no lights condensation on inside of refrigerator Kevin L. • Wanaque , NJ • October 07, 2024
Replaced both door switches
Read more
More
$31.54
- Compare At:
-
$37.53
- You Save:
-
$5.99
Genuine Ge part
By: Ge
Part Number: WB24T10145
Burner won't turn off or stays on high? This range surface element switch controls heat output. Easy DIY repair—most install in 5-10 minutes.
Do-It-Yourself Stories from Customers like You
Burner won't turn off Philip T. • Bridgeton , NJ • September 24, 2018
Installed new switches. Done in 20 minutes.
Read more
More
$48.21
- Compare At:
-
$57.37
- You Save:
-
$9.16
Genuine Whirlpool part
By: Whirlpool
Part Number: WP207166
Washer won't start or keeps blowing fuses? The lid check switch ensures your washer only runs when the lid is closed. Easy DIY repair in under 30 minutes.
This part fixes the following symptoms
-
Will not fill with water
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
My washer stopped it just sttoped working Charles T. • Houston , TX • February 01, 2015
First I needed to replaced the timer. However that timer is no longer available. So I was not able to buy that part. A friend encouraged me to cross reference the part number. I did and I found another timer that claimed it would work on my machine. It looked very similar. I got the timer from you guys and put it in. The water valves worked right away but the motor did not. I researched more troubleshooting ideas and discovered I had a bad lid check switch. I got a new one of those from you...
Read more
More
$45.30
- Compare At:
-
$54.36
- You Save:
-
$9.06
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002125
If your dual burner only works on high or won't heat at all, this dual infinite switch kit restores full temperature control. Moderate difficulty install.
Do-It-Yourself Stories from Customers like You
Range dual surface unit would only go on in "high" setting not on any other settingsje Kenneth C. • Tolland , CT • July 28, 2015
Replace dual infinity switch. The only difficulty is the terminal labels on the new switch did not match at all with the terminal labels on the original switch. The enclosed instructions were NOT helpful. But I contacted your representative, Johnny, and he was most helpful and patient. From my model number he located very specific and detailed instructions for how to wire the new switch. The rest of the job was easy. Your representative was outstanding. Thanks.
Read more
More
$57.39
- Compare At:
-
$75.66
- You Save:
-
$18.27
Genuine Frigidaire part
By: Frigidaire
Part Number: 134844470
Replacement selector switch knob for washer dryer combo control panels. Installs on the control stem to select wash or dry cycles. Needed when cracked or broken.
Do-It-Yourself Stories from Customers like You
Start switch knob broke off. Jeff O. • Laurier , WA • March 07, 2018
I went online, ordered the part and installed it,,, took 15 minutes to install,,,saved huge $$$
easy peasy!! :-)
Read more
More
$59.48
- Compare At:
-
$71.38
- You Save:
-
$11.90
Genuine Bosch part
By: Bosch
Part Number: 00165256
Dishwasher won't fill or keeps overfilling? The float switch detects water levels for proper filling and draining. Accessible repair in under 30 minutes.
This part fixes the following symptoms
-
overflowing
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Inlet valve would not open to let water into the dishwasher Kurt J. • Burnsville , MN • January 09, 2015
I checked continuity at the float switch since I knew the inlet valve was working when direct wired to 120v. Switch did not have continuity. Replaced switch and inlet valve worked at start of cycle.
Read more
More
$31.35
- Compare At:
-
$36.99
- You Save:
-
$5.64
Genuine Frigidaire part
By: Frigidaire
Part Number: 318191023
If your dual burner stays on low and won't turn off, or the small element doesn't heat, this infinite switch may need replacing. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Large element was very erratic on temperature low/high. Rodney C. • Lake Wales , FL • March 01, 2018
Replaced the infinite, dual, switch. Very good instructional video for Safety, removal * install.
Read more
More
$62.43
- Compare At:
-
$74.92
- You Save:
-
$12.49
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10244639
Burner stuck on high or won't heat? This infinite switch controls cooktop element temperature. Common DIY repair taking 30-60 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
The burner on a Whirlpool cook top went to high heat and stayed there once the knob was turned on for the burner. Turning the knob to a lower setting did not lower the heat Jim W. • Houston , TX • June 17, 2019
Had to replace the switch for the left rear burner on a Whirlpool cooktop Model W5CE3625AB00. I turned off the circuit breaker for the cooktop and lifted it out of the countertop. It was simply held down by its own weight. There were approximately a dozen screws holding the smooth surface down onto the rest of the unit. I removed those screws, which allowed the cooking surface to lift back on a hinge in the back of the unit. Two of those screws were stripped, but I was able to remove them...
Read more
More
$95.95
- Compare At:
-
$115.14
- You Save:
-
$19.19
Genuine Whirlpool part
By: Whirlpool
Part Number: W11120791
Burner stuck on high or won't turn off? This burner control switch regulates heat settings. Moderate DIY repair—label wires before swapping.
Do-It-Yourself Stories from Customers like You
Burner only worked on high Thom R. • Bowdoin , ME • February 12, 2016
If one control starts to fail the rest are sure to follow soon - so I replaced all four on our JennAir S160. Looked up the parts on line. Due to my background as an aviation electrician in the Navy and then working as an electrical systems designer for a defense contractor the toughest part was the clean up. Oh Well.
Read more
More
$78.27
- Compare At:
-
$93.92
- You Save:
-
$15.65
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3395382
The Start Switch is an OEM replacement part for Whirlpool dryers. It is an electronic component responsible for initiating the heating elements and tumble cycles upon user command from the control panel.
Causes of a bad start switch involve general wear over extended use. Failure of the internal conducting surfaces interrupts circuit activation as well.
Symptoms of a bad start switch include:
- Heating elements or tumble cycles that will not engage properly
- Dryer fails to operate or stops mid-cycle unexpectedly
- Control panel appears non-responsive to selections
- Error codes related to ignition or power delivery faults
Note: This dryer push-to-start switch has 2 terminals.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore electric dryer models.
Do-It-Yourself Stories from Customers like You
Dryer wouln't start heard the timer working but the starter wouldn't start Perry B. • Stockton , CA • December 05, 2014
I replaced the starter switch, that really didn't need to be replaced, and the thermal fuse, which did.
Read more
More
$50.57
- Compare At:
-
$60.18
- You Save:
-
$9.61
Genuine Whirlpool part
By: Whirlpool
Part Number: W10818230
Replace a cracked, broken, or missing control knob on your range. This knob installs on the control panel shaft to adjust burner settings and oven temperature.
Do-It-Yourself Stories from Customers like You
My knobs on my range had broken Deborah L. • Baltimore , MD • April 14, 2020
By ordering my parts and they fit good.
Read more
More
$31.59
- Compare At:
-
$37.59
- You Save:
-
$6.00
Genuine Frigidaire part
By: Frigidaire
Part Number: 134762010
Fix a washer that won't fill, overfills, or shows E35 error code with this water level pressure switch. Moderate DIY repair takes about 1-2 hours.
Do-It-Yourself Stories from Customers like You
E35 Michael B. • Mechanicsville , VA • September 13, 2016
Water valve not closing all the way. Water keep entering washer even with power cord unplugged. Parts I ordered fit perfect. Ordered on Thursday night , parts there Saturday. Great service and shipping. Thank
Read more
More
$45.95
- Compare At:
-
$60.39
- You Save:
-
$14.44