Touch Parts

I found a YouTube video on how to diagnose the problem and a recommendation to buy the part with you guys. Read more

I called Appliancepartspros.com they suggested first to replace the membrane first. I removed the old one and connected the new one temporary. Tested every button, then after everything worked I stuck the membrane to the stove. The only problem I had was trying to remove the ribbon cables from the circuit board.They are in very tight. Read more

Originally, I was told by Appliance Parts technician that the control board needed replacing. I ordered a new board and replaced it. No change. Called another AP technician and he said it is the panel control board which is the keypad that needed replacing and promptly provided me a return authorization number to return the control board. I replaced the panel control board (key pad) and all is working once again. I probably saved $600 by doing it myself. Read more

1.) Remove the 4 top star-head screws on the back side of door and loosen the next 2 lower screws on both sides of door about half way (loosening lower screws allows for easier access when installing new control panel) 2.) Disconnect control panel wires 3.) Replace handle 4.) Reconnect control panel wires 5.) Install control panel 6.) Tighten all 8 screws 7.) Test unit Read more

My 15 year old son and I examined the new parts and made a plan for how we were going to take the front off of the oven. Turns out it was fairly simple. We removed the knobs, the knob shrouds, two philip screws on the side of the head and about 6, 6mm hex sheet screws. Voila! It came apart. We carefully looked at how the old parts were assembled and simply reversed the assembly with the new parts. Since one of our parts was the entire front head, it went together quickly and it was a perfect... Read more

Replaced Control Panel on LG Oven. I would not recommend these LG Ovens. This is the THIRD control panel in 5 years. Read more

Opened up door panel, unplugged ribbon cable from old keypad and plugged in new keypad without installing just to verify keypad was the problem. Start button on new keypad worked so I then removed old keypad which is basically just like peeling off a sticker. Next step was to remove leftover adhesive using solvent. This was most time consuming step of the repair. Once adhesive was removed I cleaned the mounting surface thoroughly to ensure new keypad would adhere. I then passed ribbon... Read more

We replaced the thermal fuse as recommended by Appliance Parts Pros as 59% the problem and since it was only a $20 part we decided it was worth changing. We also replaced the touch pad /control panel for $160 (not the entire control component). We also discovered once the dishwasher was apart that the door latch was broken. I had not ordered a new door latch so we able to use Gorilla Glue to repair the door latch. After these repairs the dishwasher is working again but we are not sure which of... Read more