Ce Small Engine On-Off Switch Parts
Genuine Ge part
By: Ge
Part Number: WB24T10165
The Rocker Switch is an OEM part for GE ranges. This switch is used to control the surface heating elements, allowing users to turn them on or off and adjust the heat levels. It is designed to fit securely into the range's control panel, providing reliable operation and ease of use.
Causes of a bad switch rocker element can include regular wear and tear, electrical issues, or damage from spills or high temperatures. Over time, the internal contacts of the switch can degrade, leading to malfunction.
Symptoms of a bad switch rocker element include:
- The heating element not turning on or off
- Difficulty in adjusting the heat levels
- The switch feeling loose or unresponsive
- Flickering or intermittent operation of the heating element
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The burner size switch was bad Charles P. • Okeechobee , FL • October 16, 2015
Replaced the switch took a total of about five minutes. I pulled the stove out and turned the breaker off so I only had to pull it out enough to get a 1/4 " nut driver in behind it. Removed three screws and the back cover came off. I pushed the switch threw from the back and switched over the two wires then reversed the process. Completely easy if you can use a screw driver your crazy not to replace it yourself
Read more
More
$49.95
- Compare At:
-
$58.94
- You Save:
-
$8.99
Genuine Ge part
By: Ge
Part Number: WB23K10003
Fixes burner stuck on high or no heat issues. This infinite switch regulates cooktop element temperature by cycling power on and off. Simple replacement.
Do-It-Yourself Stories from Customers like You
Control element went out Rita S. • Linton , IN • June 01, 2015
Just a simple install my maintenance man just put it in with no problems.
Read more
More
$46.74
- Compare At:
-
$55.62
- You Save:
-
$8.88
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001514
Washer won't start or fill with water? A faulty lid switch assembly with fuse is often the cause. DIY-friendly repair—most complete it in under an hour.
Do-It-Yourself Stories from Customers like You
Bad lid switch assembly Jim A. • Navarre , FL • March 15, 2014
Removed front and top panels of washer, removed old switch assembly. Then mounted and hooked up new switch assembly, put panels back on, turned on power and unit now works fine. Thanks for the quick delivery on the part...our total machine down time was only 36 hours. Biggest difficulty was getting the machine out of its position to work on it!
Read more
More
$132.95
- Compare At:
-
$158.21
- You Save:
-
$25.26
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813663
Dryer won't start or stops mid-cycle? This door switch detects when the door is closed, allowing your dryer to run. Simple DIY fix in 15-30 minutes.
More
$52.68
- Compare At:
-
$62.16
- You Save:
-
$9.48
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813600
This door switch senses whether the appliance door is closed and signals the controls to run only when it's safe. Replacing a worn or intermittent switch restores dependable starts and proper shutoff when the door opens. What it does:
- Detects door position and allows operation only when the door is fully closed
- Interrupts operation when the door opens for safety
- Common symptoms include: won't start, stops when the door is moved, or "door open" message/error
- Intermittent starts due to worn actuator or internal switch contacts
What's included:
Install notes:
- Disconnect power before servicing
- Access the switch from the front or top panel; release mounting screws or tabs
- Move wires to the new switch one at a time to maintain correct positions, then secure the switch
- Test operation before reassembly
More
$53.78
- Compare At:
-
$64.00
- You Save:
-
$10.22
Genuine Frigidaire part
By: Frigidaire
Part Number: 240505801
Fix a refrigerator light that won't turn on or off when the door opens or closes. This door-activated light switch is a simple 5-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Broken ice dispenser actuator, rusty front plate, bad fridge door switch Michael A. • Garnerville , NY • August 06, 2020
My problem started with a rusting condition in the ice bin that spiraled out of hand. I took apart the ice bin and all the hardware thinking I could clean it with the suggested baking powder. Plastic parts cleaned up like new, metal parts were pitted. I wire brushed and sanded the parts put it all back together and gave it a try. All appeared fine then two days later the ice dispenser stopped. I watched a couple of videos and most pointed to the ice auger motor. One video specifically said you...
Read more
More
$64.95
- Compare At:
-
$76.64
- You Save:
-
$11.69
Genuine Samsung part
By: Samsung
Part Number: DC96-01703B
Fix a washer stuck mid-cycle or showing overfill errors with a new water level pressure switch. This part detects water levels to control fill cycles.
This part fixes the following symptoms
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Samsung washer was getting stuck on 7 minutes and making lots of noise while spinning. Chris C. • Rocky Point , NY • September 01, 2017
Machine was a front load washer, after doing some research found that problem is usually caused by pressure sensor or the spider arm which attaches motor to tub.
Read more
More
$82.95
- Compare At:
-
$98.71
- You Save:
-
$15.76
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820051
Fix washer overfilling or won't fill issues with a new water level pressure switch. Prevents flooding and restores proper fill cycles. 10-minute DIY repair.
This part fixes the following symptoms
-
Will not stop filling with water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Washer overflowed and flooded the basement Tyler H. • Gardner , KS • February 27, 2016
Replaced the water-level switch and hose. Washer works again, no overflowing since!
Read more
More
$110.42
- Compare At:
-
$132.50
- You Save:
-
$22.08
Genuine Speed Queen part
By: Speed Queen
Part Number: D513505
This 3-position fabric selector switch is the control behind the knob that lets you choose the fabric setting on your unit. Replacing a worn switch restores positive detents and ensures your selection is recognized instead of ignored or stuck.
- Provides three selectable fabric settings to tailor operation
- Routes the chosen setting to the timer/control
- Typical symptoms: no response when changing settings, intermittent selection, or being stuck on one mode
- Physical clues of failure: loose/no detent feel, broken shaft, or heat-discolored terminals
What's included: One 3-position fabric selector switch Installation notes:
- Disconnect power before servicing
- Access the control console; remove the knob and retaining hardware to free the old switch
- Photograph/label wire positions and transfer each lead to the same terminals on the new switch
- Reassemble and test all three positions for proper engagement
Do-It-Yourself Stories from Customers like You
Dryer not heating Sandy H. • Burkesville , KY • January 14, 2017
Replaced the fabric selector switch. Took abut fifteen minutes. Dryer works fine.
Read more
More
$35.95
- Compare At:
-
$42.78
- You Save:
-
$6.83
Genuine Whirlpool part
By: Whirlpool
Part Number: W10918003
Ice maker not harvesting or making ice? This rocker switch controls ice maker operation. Common fix when ice production stops despite good water flow.
More
$51.62
- Compare At:
-
$61.43
- You Save:
-
$9.81
Genuine Frigidaire part
By: Frigidaire
Part Number: 316238202
The Dual Element Surface Switch is an OEM part for Frigidaire electric ranges and cooktops. It governs power distribution to the dual element.
Causes may be loose electrical terminals within the switch, defects from past power surges, or general wear over extended use.
Symptoms of a bad surface switch include:
- Inability to toggle one or both elements independently
- Elements activating intermittently or staying stuck on
- Overheating, sparks or strange sounds from faulty connections
- Repeated burning or singeing of cookware bottoms
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Both large burners were starting to go to higher heats at lower settings. James T. • Hilo , HI • April 23, 2023
I replaced both the large single element and the large dual element control switches. It appears the resistors were burning out. Problem seems to be fixed. Will know later when I do some simmering.
Read more
More
$85.95
- Compare At:
-
$103.14
- You Save:
-
$17.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293830
If your range burner won't turn on or off properly, or the indicator light stays on when turned off, this infinite switch restores control. DIY repair.
Do-It-Yourself Stories from Customers like You
Burner control bad, could not tell if it was on the number Chalmer M. • Tipp City , OH • January 21, 2022
Remove front panel and replaced. Received parts fast.
Read more
More
$80.21
- Compare At:
-
$94.65
- You Save:
-
$14.44
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304509458
This door release lever connects the push-button to the latch assembly inside the microwave. Replacing a worn lever restores smooth, reliable door opening so the button works on the first press.
- Transfers motion from the door-open button to the latch hooks to release the door
- Helps resolve a door that won't open when the button is pressed
- Addresses a button that feels loose, sticks, or lacks resistance
- Replaces a cracked or broken lever causing intermittent door operation
What's included: 1 lever Install notes:
- Unplug the microwave and discharge the high-voltage capacitor before servicing
- Remove the grille and control panel to access the interlock/latch area
- Note spring and pivot orientation and transfer any reusable hardware
- Test door release action before completing reassembly
Do-It-Yourself Stories from Customers like You
Microwave blew line fuse Gerald G. • St. Louis , MO • August 05, 2019
It took a long time to determine the problem but eventually I discovered that the plastic bracket (latch hook) that held the three door-switches showed appreciable wear from repeated door openings and closings. This wear stopped the door from sealing properly and the door switch safety mechanism blew the line fuse. I replaced the worn bracket (AP6230612) as well as the plastic latch mechanism (AP4553585) on the door that engages this bracket (and of course the fuse too) and the microwave now...
Read more
More
$11.22
- Compare At:
-
$12.09
- You Save:
-
$0.87
Genuine Whirlpool part
By: Whirlpool
Part Number: W10847984
Dryer won't start or tumble? This belt switch monitors drive belt tension and cuts power if the belt breaks or slips. Moderate DIY repair with video.
Do-It-Yourself Stories from Customers like You
Loud noise and squealing from bottom of Cabrio dryer. Mark B. • Goodyear , AZ • November 24, 2018
Remove bottom panel, remove top panel, remove drum. Had to cut old squirrel cage off. Remove motor to remove old wheel shank. Remove belt switch, and replaced. Videos from AppliancePartPros helped a lot..
Read more
More
$27.37
- Compare At:
-
$32.30
- You Save:
-
$4.93
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10149355
Fix burners stuck on high or not regulating temperature with this range infinite switch. Controls heating element power for precise cooking control.
Do-It-Yourself Stories from Customers like You
I had to change the burner switch Paul C. • Rochester , NY • November 09, 2014
Using the video on your site I was able to make the repair. It was a pretty straight forward repair. Thanks for having the diagram on your site for helping me find the right part.
Read more
More
$148.53
- Compare At:
-
$178.24
- You Save:
-
$29.71
Genuine Ge part
By: Ge
Part Number: WH12X10141
Fix a washer that won't agitate or spin with this lid switch. This safety part detects if the lid is closed. Easy DIY repair with basic tools.
Do-It-Yourself Stories from Customers like You
Washing machine would agitate but not spin Kevin T. • Overland Park , KS • January 27, 2020
Replaced lid switch and capacitor
Read more
More
$39.63
- Compare At:
-
$47.56
- You Save:
-
$7.93