Module Parts

The Refrigerator Ice Guide Assembly is essential for maintaining optimal ice production in your Samsung refrigerator. This genuine OEM part ensures proper ice formation and smooth dispensing, preventing clogs and spills that can disrupt your ice makerGÇÖs functionality. Crafted with durability in mind, the Refrigerator Ice Guide Assembly helps keep your ice system clean and efficient, enhancing the overall performance of your appliance. Installing this part is straightforward, allowing you to quickly restore your refrigeratorGÇÖs ice-making capabilities without hassle. Compatible with a wide range of Samsung refrigerator models, this genuine OEM part guarantees a secure fit and reliable operation. By choosing the Refrigerator Ice Guide Assembly , you benefit from improved ice consistency and reduced maintenance, ensuring that your freezer continues to provide ice effortlessly. Whether replacing a damaged or worn-out guide, this component is the perfect solution to keep your Samsung refrigerator functioning smoothly and efficiently.

The Ice Maker is an OEM part for Frigidaire refrigerators. Located inside the freezer compartment, it produces batches of bullet-shaped ice to be accessed through the door dispenser. As the component tasked with creating on-demand ice, the ice maker plays an important role in offering refreshed beverages.

Causes of a bad ice maker include normal wear of internal parts like the water fill tube, freezer coil, or gear motor over extended use. Mineral sediment within hard water areas could also impact performance by restricting water flow or freezing mechanisms over time.

Symptoms of a faulty ice maker involve:

• Insufficient ice production
• Odd sized cubes
• Loud freezing noises
• Ice with inconsistent texture or cloudiness

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Electronic Control Board is an OEM part for Whirlpool dishwashers. As the central processing unit, this board regulates all wash and rinse cycles according to preprogrammed instructions. It communicates timing and commands to other crucial components.

Symptoms of a faulty control board include: 

• Failure to power on or unresponsive touch controls  
• Inability to select or advance through wash cycles
• Noise or vibration issues from improper component operation 
• Error codes appearing repeatedly on the digital display

Causes can involve water intrusion corroding circuits or individual component failure due to prolonged operation. Over time, environmental factors may inhibit board performance.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This is the complete ice container assembly for the dispenser. It stores ice and drives cubes to the chute so your dispenser can deliver ice reliably and without jams.

• Holds finished ice in the freezer and feeds it to the dispenser
• Integrated auger moves and helps break up ice for consistent dispensing
• Common failure signs: ice not dispensing, auger not turning, loud grinding, or cracked/leaking bucket
• Restores proper in-door ice dispensing performance

• Unplug the refrigerator and remove the ice bin from the freezer door or shelf
• Transfer any remaining ice to a cooler; let any frost melt to avoid damage
• Align the drive coupling and slide the new bin fully into place
• Restore power and test ice dispense for cube and crush functions

This electronic control board is the central "brain" of your appliance. It manages power distribution, sensor inputs, and timing so selected functions run correctly. Replacing a failed board restores proper operation and reliable, responsive controls.

• Coordinates and sequences operations based on user selections and built-in programming
• Interprets inputs from sensors/switches and communicates with the user interface
• Drives components such as motors, pumps, valves, and relays as required
• Common symptoms of a failed board: appliance won't start or respond, cycle won't advance, stops mid-operation, intermittent behavior, or error/blinking status codes

• Disconnect power at the breaker or unplug the appliance before servicing
• Use ESD precautions; handle the PCB by the edges to avoid static damage
• Photograph wiring and transfer connectors one at a time to the new board
• Some models require service-mode setup or programming after installation—follow the tech sheet for your unit

This refrigerator ice maker assembly automatically fills, freezes, and ejects ice cubes to keep your bin stocked. Replace it when the original unit stops producing ice, won't complete a harvest cycle, or leaks around the mold area.

• Forms, freezes, and harvests ice automatically into the storage bin
• Coordinates with the water valve and internal controls to manage fill and shut-off
• Common signs of failure: no ice production; cubes not ejecting or jamming; misshapen or hollow cubes; water dripping/leaking near the icemaker; intermittent clicking

• Disconnect power and shut off the water supply before servicing
• Remove the ice bin; loosen mounting screws; unplug the wire harness; transfer any mounting hardware or shut-off arm from the old unit if needed
• Align the fill cup with the water tube; secure the new assembly and reconnect the harness
• Restore power and water; allow several hours and discard the first batches

The Control Board is an OEM part for Bosch dishwashers. It is the central electronic component responsible for operating and controlling all dishwasher functions. The control board receives input signals, processes commands, and directs the operation of wash cycles, motors, heating elements, and other electrical systems. 

Symptoms of a bad control board can include:

• The dishwasher is not starting or finishing cycles properly
• Lights, displays, or touchpads not working correctly 
• Strange noises coming from the dishwasher interior
• Inability to change programs or select desired cycle settings

Causes of control board failure may be due to electrical issues such as power surges, shorts, or general circuit malfunctions that can interfere with board operation over time. 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

The User Interface is an OEM part for Frigidaire dishwashers. As the user interface, it allows users to select cycles, options, and monitor dishwasher status.

Causes may be due to wear and tear over time, water damage, or shock/impact. This OEM Frigidaire part replaces the entire control panel assembly to restore full functionality.

Symptoms of a bad user interface include:

• Unresponsive or nonfunctional buttons
• Blank or dead display screen
• Inability to select cycles or options
• Erratic operation and unexpected behavior

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This electronic control board is the appliance's command center. It reads inputs from switches and sensors, then directs power to components to run selected cycles—helping restore reliable operation when the original board fails.

• Coordinates timing and power to key components
• Interprets user commands and sensor feedback
• Manages cycle logic and stores/communicates fault codes
• Failure symptoms include no power, unresponsive controls, cycles that won't start or complete, or intermittent operation/error codes

• Disconnect power at the breaker before servicing
• Use ESD precautions; handle the board by the edges and avoid touching circuitry
• Note/photograph wiring and move connectors one at a time to the new board
• Inspect connected loads (motors, heaters, valves, fans) for shorts before powering up the new board

This is the drive gear for the ice maker module. It transfers motor power to the ejector/harvest mechanism so cubes release consistently; worn or stripped teeth can cause clicking, stalls, or little to no ice production.

• Transfers motor torque to rotate the ejector and complete the harvest cycle
• Replaces a cracked, stripped, or worn gear that prevents proper ice ejection
• Typical symptoms: no ice production, icemaker stuck mid-cycle, clicking or grinding from the module
• Helps restore reliable ice maker cycling

• Unplug the refrigerator before service; turn off the water supply if moving the icemaker
• Remove the icemaker assembly for access; note the original gear's orientation before removal
• Align the new gear with the shaft; do not force it—inspect mating parts for wear
• After reassembly, verify the ejector turns freely; restore power and run a test cycle

The Refrigerator Ice Maker Assembly is a genuine OEM part designed to restore the ice-making functionality of your Samsung refrigerator. Crafted for durability and performance, this assembly ensures reliable ice production, helping you maintain the convenience of having fresh ice whenever you need it. Compatible with a wide range of Samsung refrigerator models, it offers a secure fit and straightforward installation, making it easy to replace a faulty or damaged ice maker. By choosing this genuine OEM part, you ensure that your refrigerator operates efficiently and maintains its original performance standards. Enjoy consistent ice generation and enhance your kitchenGÇÖs functionality with the Refrigerator Ice Maker Assembly , a dependable solution for keeping your appliance in optimal condition.

The USER INTERFACE PANEL is an OEM part for Whirlpool brand dishwasher models. It houses the electronic controls and digital display used to program cleaning cycles and adjust settings. 

Symptoms of a bad user interface panel include:

• Glitchy or unresponsive buttons that do not register selections
• Inaccurate or non-functional digital readouts  
• Failure to advance through cycles or changing programming 

As an interface device used frequently, the panel faces wear through repetitive touch inputs. Exposure to moisture splash-back or impact damage poses other risks to components over time. Replacing it with this genuine Whirlpool part restores reliable controls.

This OEM Whirlpool replacement user interface panel is also compatible with KitchenAid, Jenn-Air, Amana, Admiral, and some Kenmore dishwasher models. Secure operation maximizes convenience cycle after cycle.
 

This ice crusher blade (#2) mounts in the freezer's ice bucket assembly. It helps break up cubes for the Crushed Ice setting and can restore smooth dispensing when the original blade becomes bent, dull, or broken.

• Mounts inside the ice bucket crusher to slice/crush cubes when Crushed Ice is selected
• Helps maintain consistent ice flow and size through the dispenser
• Wear or damage may lead to no crushed ice, only whole cubes dispensing, jamming, or grinding noises
• Visible bending, dull edges, or a missing blade are common failure signs

• Disconnect power and remove the ice bin from the freezer
• Disassemble the crusher housing to access the blades; note the order/orientation of blade #1 and blade #2 before removal
• Wear cut-resistant gloves—edges are sharp
• Reassemble in the same order, tighten fasteners, reinstall the bin, and test the dispenser

This ice bucket assembly stores and delivers ice to the dispenser. Replacing a damaged bucket restores smooth, reliable dispensing and helps prevent jams when the original container is cracked, worn, or no longer engaging the drive.

• Stores finished ice beneath the icemaker and positions it for dispensing
• Interfaces with the dispenser drive to move ice into the chute when activated
• Helps maintain proper alignment for consistent cube delivery
• Common symptoms: cracked or broken container/tabs, ice won't dispense or jams, grinding/skipping during dispense

• Disconnect power to the refrigerator before servicing
• Remove the old bucket; empty ice and note the drive coupler orientation
• Seat the new assembly fully so the drive engages; transfer any reusable covers from the original if needed
• Restore power and test ice dispensing

This ice maker kit adds automatic ice-making capability to compatible refrigerators. It supplies the core components to produce, harvest, and store ice cubes reliably, restoring convenience when the original icemaker or related parts are missing or failed.

• Automatically fills, freezes, and ejects ice, cycling until the storage bin is full
• Directs and controls water flow via the inlet valve and fill tube for proper ice production
• Stores finished cubes in the bin for easy access
• Helpful for issues like no ice production, intermittent or undersized cubes, or leaks around the icemaker area

• Disconnect power and shut off the water supply before starting; wear cut-resistant gloves
• Mount the icemaker and bin in the freezer; route/seat the fill tube correctly to prevent leaks
• Install the inlet valve, connect tubing and harnesses, and tighten 1/4-in compression fittings; turn on water and check all joints for leaks
• Restore power; allow the freezer to reach temperature and up to 24 hours for full ice production, discarding the first batches

This ice maker shut-off arm is the wire bail that senses ice level in the bin. It lifts to stop production when full and lowers to restart cycles, helping prevent overfilling and restoring normal, automatic ice making.

• Senses bin ice level and mechanically signals the ice maker to run or stop
• Prevents overfilling by stopping ice production when the arm is raised
• Restores ice making when the arm is lowered after ice is used
• Replacing a bent, missing, or jammed arm can help with "won't stop making ice" or "won't make ice" issues

• Disconnect power before servicing; remove the ice bin for access
• Insert the arm's pivot ends fully into the ice maker head openings; ensure correct orientation
• The arm moves freely without binding, then restore power and lower the arm to resume ice production