Power Nut Installation Parts
Genuine Ge part
By: Ge
Part Number: WE04X10094
This thermal limiter is a safety fuse designed to protect the dryer from overheating by cutting off power to the heating element if temperatures exceed safe limits. It is typically mounted on or near the heating element housing. Replace this part if the dryer is not heating at all, as a blown thermal limiter is a common cause of no-heat conditions often triggered by restricted airflow or a clogged vent.
Do-It-Yourself Stories from Customers like You
Belt jumped off idler did not trip belt switch at first thermal limiter shut dryer down Bill M. • Bradenton , FL • January 16, 2017
REPLACED BELT AND IDLER. TESTED AND FOUND THERMAL LIMITER BLOWN SO REPLACED IT. DRYER WORKS GOOD
Read more
More
Genuine Ge part
By: Ge
Part Number: WE4M127
Fix a dryer that won't heat, overheats, or runs too long. This thermostat cycles the heating element to maintain safe drying temperatures.
More
Genuine Ge part
By: Ge
Part Number: WE4X800
Fixes dryer not heating or overheating issues. This safety thermostat monitors temperature and cuts power when too hot. Basic DIY repair, 30 minutes.
Do-It-Yourself Stories from Customers like You
No heat in the dryer Randy C. • Bethlehem , PA • April 09, 2017
With a screwdriver and some mechanical aptitude. Nothing harder that a few screws to change the parts.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10017410
This time-delay fuse protects the appliance's power circuit by opening when current exceeds a safe level while tolerating brief inrush current. Replacing a blown fuse can help restore power once the root cause is corrected. What it does:
- Protects the line and control circuits from shorts and overloads
- Time-delay design helps prevent nuisance opening during startup surges
- When open, the unit will be completely dead—no display, lights, or response
- Repeatedly opening usually indicates an unresolved electrical fault that needs diagnosis
What's included:
Install notes:
- Disconnect power at the breaker before servicing; some appliances can retain dangerous high voltage
- Replace only with the same type and rating specified by the manufacturer
- Inspect the fuse holder and wiring for heat damage or loose connections before reassembly
- If the new fuse opens immediately, stop and diagnose the underlying cause; never bypass or upsize a fuse
Do-It-Yourself Stories from Customers like You
Microwave stated ‘door open’ and would not work. Margo D. • Tarpley , TX • March 17, 2019
I read up on others with this problem of microwave-wall oven combination Whirlpool Gold. We live in a very rural area and were not able to get ANYONE to service it - had 2 companies come out to inspect but they never returned. I have wonderful news! We replaced the fuse, bus fuse, and light bulb (quit working 2 years ago) and all is working. Thanks for the information and for the part diagram. Couldn't have done it without you.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134430300
Fastens panels, brackets, and internal components in your dryer. Replace stripped, rusted, or missing screws to restore secure mounting and alignment.
Do-It-Yourself Stories from Customers like You
Broken lint cover Scott T. • Long Beach , MS • July 19, 2025
Screwed it on. The order shipped out the same day, arrived fast and on time.
But I have to mention the customer service. The person helping me place the order was EXCEPTIONAL!!!! Very friendly and helpful. BEST customer service experience I’ve ever had. I was so impressed that I asked to speak to her manager. The manager was also exceptional. Very nice. I highly recommend this company.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 137241000
Replacement mounting screw for dryers. Secures panels, brackets, and internal components. Replace if stripped, missing, or corroded during repairs.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304406099
This safety thermostat is a temperature-sensitive switch that helps protect your appliance from overheating. When excessive heat is detected, it opens the circuit to stop power to critical components, helping prevent damage and ensuring safe operation.
- Monitors temperature at a specific location and interrupts power if it exceeds a safe limit
- Can cause no power, no heat, or shutdown during use when failed or tripped
- Helps prevent overheating damage to internal components
- Restores normal operation when replaced
What's included: Safety thermostat only. Install notes:
- Disconnect power to the appliance before service
- Note wire positions and terminal orientation before removal
- Use proper tools and avoid bending or stressing terminals
- After installation, check for underlying overheating causes (blocked airflow, failed fan, etc.)
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304483509
Threads onto your sink faucet to connect a portable dishwasher's quick-connect hose. Replace if cracked, stripped threads, or missing the original adapter.
Do-It-Yourself Stories from Customers like You
Needed a adaptor for portable dishwasher Richard T. • Little Canada , MN • October 15, 2016
Done by hand tighting.
Read more
More
Genuine Lg part
By: Lg
Part Number: 1SBF0402618
Replace missing or stripped taptite screws that secure panels and internal components. This thread-forming screw creates a tight hold to eliminate rattles.
More
Genuine Lg part
By: Lg
Part Number: 383EEL9001H
Hardware screws and nuts for installing a dryer side vent kit. Replace missing or stripped fasteners when reconfiguring exhaust outlet direction.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 241695904
Replacement screw secures door handles, brackets, panels, and trim to refrigerator mounting points. Install when hardware is missing, stripped, or loose.
Do-It-Yourself Stories from Customers like You
Door handle bracket/clip broken Eric T. • Mableton , GA • September 21, 2019
Had to buy a new handle. Very easy to install. The part was delivered in one day.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10846509
The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear bulkhead to the tub, ensuring vibrations are reduced through solid mounting points. Properly installed screws dampen oscillating movement.
Causes of a bad screw include damage from water exposure like corrosion or breakage from stress concentrations if the tub bangs around during imbalanced loads.
Symptoms of a bad screw include:
- Loose or detached rear bulkhead allowing side-to-side play
- Excessive noise and shaking felt through the surrounding walls
- Development of micro-cracks around screw holes over time
- Potential leak paths if holes are no longer sealed
This Whirlpool replacement screw restores a stable suspension system. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The drum was off center and tilted forward right and water was pouring on the floor William T. • Farmingdale , NY • December 22, 2015
Springs were broken and back bracket was bent I replaced the bracket and all four Springs including the vertical one. I removed the cabinet as shown in the video. Then with a pair of vise grips's removed the springs one by one and replace them. The bracket was rusted And bent i used a quarter inch socket with a quarter inch ratchet to remove the screw. Due to the rust i used penetrating oil the screw.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB01X22142
Complete mounting hardware kit for installing over-the-range microwaves. Includes brackets and fasteners to secure unit above cooktop. Replace missing or damaged parts.
Do-It-Yourself Stories from Customers like You
Bought over the oven microwave as is without installation hardware Jeff P. • Reston , VA • July 21, 2014
Bought the installation kit above with all the hardware and screws needed to install. About half the price as the manufacturer.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3404153
This is a high limit thermostat that monitors the temperature inside the dryer's heating chamber and shuts off the heating element if temperatures exceed a safe threshold. It serves as a safety device to prevent overheating and potential fire hazards. Replace this thermostat if your dryer is not heating at all, shuts off prematurely, or if a multimeter test shows no continuity through the thermostat.
Do-It-Yourself Stories from Customers like You
20 year old Whirlpool dryer would stop mid cycle. Jonathan S. • Alexandria , VA • August 29, 2020
I don't have a multimeter so couldn't check all voltages or resistances on suspect parts. I assumed it had to be the two thermostat units - the thermostat or the dryer cycling thermostat. These were not expensive parts so ordered both and installed both. Very easy to remove back panel and replace with the new parts, making sure the OEM numbers were the same. Put back panel on, plugged back in and it fired right up - time will tell if these were the culprits. Not much left electronics wise on...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10419068
This temperature sensor mounts on the sealed-system gas inlet line in compatible refrigerators. It relays precise temperature feedback to the control so cooling and defrost cycles are managed correctly, helping maintain stable compartment temperatures. What it does:
- Senses temperature at the gas-inlet line; resistance changes are read by the control
- Helps regulate compressor, fan, and valve operation for proper cooling performance
- A failed sensor may cause erratic temperatures or extended run times
- Can correlate with control thermistor error codes or frost/ice patterns near the evaporator
What's included:
Install notes:
- Disconnect power before servicing
- Note original sensor placement and insulation; reinstall in the same location and orientation
- Attach the sensor firmly to the line and route the harness as originally, away from sharp, hot, or moving parts
- Do not open or puncture sealed-system tubing; if damage is suspected, stop.
More
Genuine Lg part
By: Lg
Part Number: 1NZZEA4001A
Replacement nut that secures drawer and trim components on compatible LG appliances. It restores a firm, vibration-resistant fastening to help prevent loosening, rattling, or misalignment during normal use. What it does:
- Secures drawer, trim or small mounting brackets to the appliance chassis.
- Helps stop loosened fasteners that cause rattling or misaligned panels.
- Provides proper thread engagement for a stable connection.
- Matches the appliance's original fastening point when used as the listed part.
What's included: One nut. Install notes:
- Always disconnect power to the appliance before beginning any repair.
- Use the correct-size wrench or socket; avoid overtightening to prevent stripped threads.
- Inspect mating screw/bolt and threads for damage; replace damaged hardware as needed.
More