Skip to Content
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • 15 million satisfied customers 15 million satisfied customers
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store

Start Switch Stack Parts

Dishwasher Door Sensor Switch
Genuine Bosch part
By: Bosch
Part Number: 00611312

This switch is mounted on the dishwasher frame and detects when the door is properly closed to allow the wash cycle to begin. Replace it if your dishwasher won't start even with the door firmly closed, or if it stops mid-cycle unexpectedly.

Do-It-Yourself Stories from Customers like You Dishwasher would not start.   Jason M. • Florence , SC • November 30, 2020

REPLACED DOOR LATCH AND DOOR LATCH ASSEMBLY. EVERYTHING WORKS AGAIN. Read more

More
$37.95
Compare At:
$44.78
You Save:
$6.83

IN STOCK
Ships Today Guaranteed
Add to Cart
Water Level Switch (5-Position Rotary)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001656

This is the washer's water level switch that senses tub level via air pressure and provides five selectable fill settings. Replacing a failed switch restores accurate filling and lets the cycle advance properly through wash, rinse, and spin.

  • Monitors air pressure from the tub to detect actual water level
  • Controls the inlet valves to start/stop filling at the selected setting
  • Signals the timer/control to begin agitation and advance the cycle once full
  • Common symptoms: overfilling or water keeps running, stops filling too soon or won't fill, inconsistent water levels, cycle won't advance due to incorrect level detection
What's included: 1 water level pressure switch with 5-position rotary selector Install notes:
  • Disconnect power and turn off water supply before servicing
  • Access the control console; remove the selector knob/dial and panel as needed
  • Note wire locations (take a photo), move the harness, and transfer the pressure hose; ensure the hose is clear and firmly seated
  • Securely mount the new switch, reassemble the console/knob, restore utilities, and test each fill level

Do-It-Yourself Stories from Customers like You Water level in Maytag washer was always high and was not adjustable   Von D. • San Bernardino , CA • December 21, 2017

Replaced the water level switch and water level pressure switch hose. Video on AppliancePartsPros.com detailed the procedure. Read more

More
$127.65
Compare At:
$150.63
You Save:
$22.98

IN STOCK
Ships Today Guaranteed
Add to Cart
Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 318394803

Has three terminals.

Do-It-Yourself Stories from Customers like You Oven light stayed on when door was closed   Robert S. • Jacksonville , IL • June 14, 2015

When trouble shooting the problem I found that the light switch housing outer lip was broken allowing the switch to push through mounting surface behind the oven door. This is a slide in range so, I proceeded to pull the range away from the counter where I could unplug the power cord. Once the power was off like located the panel on the right upper side of the unit and removed the screws to allow access to the switch. I then unplugged the switch from the wiring harness and removed the damaged... Read more

More
$53.95
Compare At:
$63.66
You Save:
$9.71

IN STOCK
Ships Today Guaranteed
Add to Cart
Range Spark Ignition Switch And Harness Assembly
Genuine Lg part
By: Lg
Part Number: EBF60662911

This is a spark ignition switch assembly with wiring harness that controls the electric igniters on a gas range cooktop. It sends voltage to the spark modules when a burner knob is turned, initiating the clicking ignition sequence. Replace this part if your burners won't spark when turned on, spark continuously even when knobs are in the off position, or if only some burners ignite properly.

This part fixes the following symptoms
  • Doesn't shut off
  • Gas igniter glows, but will not light
See more...
Do-It-Yourself Stories from Customers like You All the igniters spontaneously began to fire   Michael S. • Adams , NY • October 12, 2019

Found a YouTube video online that provided instruction on how to change out the part. Read more

More
$73.76
Compare At:
$87.77
You Save:
$14.01

IN STOCK
Ships Today Guaranteed
Add to Cart
Dishwasher Water Level Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268909

Dishwasher overflowing or not filling properly? The water level switch controls fill amount. DIY-friendly repair, typically 20 minutes with video guide.

Do-It-Yourself Stories from Customers like You Washer would not fill with water   Ty J. • Hillsboro , OR • July 08, 2018

Replaced float switch and also replaced intake valve. Worked like a charm and the process was as easy as the YouTube video I followed made it seem. Read more

More
$50.57
Compare At:
$60.18
You Save:
$9.61

IN STOCK
Ships Today Guaranteed
Add to Cart
Water Level Pressure Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10249845

This water level pressure switch senses tub water level and signals the control to stop filling and advance the cycle. Replacing a failed switch restores proper fill shut-off and allows the washer to move to wash, drain, and spin.

  • Detects water level via air pressure in the attached hose from the tub air dome
  • Signals the timer/control to close inlet valves at the selected fill level
  • Enables agitation and spin only when the level is appropriate or the tub is empty
  • Typical symptoms of a failed switch include overfilling or underfilling, continuous filling, cycle not advancing, or no spin
What's included: 1 water level pressure switch Install notes:
  • Disconnect power and turn off water supply before servicing
  • Access the switch in the control console or top panel; note wire locations for reassembly
  • Transfer the pressure hose and wire connectors to the new switch one at a time; ensure the hose is clear, not kinked or cracked, and fits snugly
  • After installation, run a quick fill test to ensure proper shut-off and cycle progression

Do-It-Yourself Stories from Customers like You Intermitten f21 error   Bill D. • Hornell , NY • March 11, 2015

After trouble shooting what f21 error was. I cleaned all hoses from the tube hose to all discharge hoses. I actually replace the washer discharge hose. I still got the same error. I had a few conversations with your service techs. They gave me great advice each time I called. At the end I had to replace the washer drain pump and pressure switch. we have gone 1 week without errors code so I consider the problem solved. I really like the replacement part videos. I also like the ease of... Read more

More
$161.76
Compare At:
$190.88
You Save:
$29.12

IN STOCK
Ships Today Guaranteed
Add to Cart
Trash Compactor Drawer Tilt Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: 9871829

Fix a compactor that won't start, stops mid-cycle, or requires holding the pedal down. This drawer tilt switch is a quick 15-second replacement.

Do-It-Yourself Stories from Customers like You Compactor would start sometimes by just closing the door when you start it by normally lifting the pedal it would not stop at the end of it's cycle   Bruce H. • Hewitt , NJ • January 19, 2015

I replaced the upper switch that contacts the door in a closed position and more important the start switch contacted by lifting the start pedal. Read more

More
$50.57
Compare At:
$60.18
You Save:
$9.61

IN STOCK
Ships Today Guaranteed
Add to Cart
Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: W11050715

This replacement switch restores reliable on/off signaling to the circuit it controls, helping your appliance start, stop, and respond correctly. A worn switch can cause intermittent operation, no response, or lights and functions that don't activate. What it does:

  • Provides an electrical open/closed signal to enable functions like starting a cycle, powering a motor or light, or shutting a feature off
  • Acts as a safety/position interlock (such as door, lid, float, or hood) depending on the model
  • Typical symptoms include won't start, won't stop, light won't turn on/off, or intermittent operation
  • Can be checked with a multimeter for continuity when actuated
What's included:
  • 1 switch
Install notes:
  • Disconnect power before servicing; turn off gas or water supply if applicable
  • Access the switch, note wire locations, and transfer leads one at a time to the new switch
  • Mount securely, ensure the actuator aligns and wires aren't pinched
  • Reassemble and test operation before finalizing

More
$7.95
Compare At:
$9.46
You Save:
$1.51

IN STOCK
Ships Today Guaranteed
Add to Cart
Range Hood Slide Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: W11662407

Fix a range hood that won't turn on, responds intermittently, or has a loose slider. This slide switch restores reliable control of fan and light settings.

More
$28.43
Compare At:
$34.12
You Save:
$5.69

IN STOCK
Ships Today Guaranteed
Add to Cart
Range Oven Door Switch
Genuine Ge part
By: Ge
Part Number: WB24T10147

This is a high-amp SPDT (single pole, double throw) switch used in the oven door mechanism. It detects whether the oven door is open or closed and signals the control to enable or disable certain functions such as the oven light or broil element. Replace this switch if the oven light does not turn on or off when the door is opened or closed, or if the oven does not operate correctly in relation to door position.

Do-It-Yourself Stories from Customers like You Faulty self cleaning latch   Gregory K. • Bel Air , MD • December 28, 2016

Replaced faulty latch with new latch. New latch was different configuration, but the fit was okay. The only issue was that the wires to the electric motor were just barely long enough. Overall easy repair if you have a T15 Torx bit, phillips screwdriver, and 1/4" nut driver. Hardest part is removing the gas cooktop to gain access to the cleaning latch. 0. Turn off electric to stove; remove the cast iron grates, center caps/orifices, and catch pans from the stovetop. 1. Disconnect the... Read more

More
$22.95
Compare At:
$27.08
You Save:
$4.13

IN STOCK
Ships Today Guaranteed
Add to Cart
Refrigerator Compressor Start Relay And Overload
Genuine Ge part
By: Ge
Part Number: WR08X10112

Fix compressor clicking every few minutes or fridge not cooling. This start relay and overload combo helps your compressor start and prevents overheating. Easy 5-minute fix.

Do-It-Yourself Stories from Customers like You Constant clicking sound from behind refrigerator and compressor would not kick on all the time freezer temp was above the desired temperature   Peter H. • Bayside , NY • May 10, 2016

I replaced the old capacitor and combo device after watching repair video. Took less than 5 minutes and now my ge profile refrigerator is running perfectly. Read more

More
$104.57
Compare At:
$124.44
You Save:
$19.87

IN STOCK
Ships Today Guaranteed
Add to Cart
Refrigerator Compressor Start Capacitor
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304470340

Fix a humming compressor that won't start by replacing this capacitor. Restores proper startup and cooling. DIY-friendly repair under 30 minutes.

Do-It-Yourself Stories from Customers like You The power was still on but the unit no longer cooled   Kimberly B. • Santa Ana , CA • March 09, 2018

We replaced the starter and relay. Unit is working properly. We saved over $150 by replacing the parts in question. Read more

More
$13.95
Compare At:
$16.60
You Save:
$2.65

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Water Level Pressure Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: W11417623

Fix a washer that won't fill with water or overfills with this water level pressure switch. Controls proper water amounts for each wash cycle.

Do-It-Yourself Stories from Customers like You Water wouldn't fill the basket   Mike R. • Essington , PA • December 03, 2016

Replaced the faulty switch with the new part. Found out tge problem by doing a simple Google search! Read more

More
$52.68
Compare At:
$62.69
You Save:
$10.01

IN STOCK
Ships Today Guaranteed
Add to Cart
Refrigerator Door Light Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4387911

Fix a refrigerator light that won't turn on or off when you open the door. This push-button switch senses door position. DIY repair in 30 minutes.

This part fixes the following symptoms
  • Light not working
See more...
Do-It-Yourself Stories from Customers like You A failed freezer door switch was causing the fridge to display that the door was open when it was not this caused it to beep at random   Kara H. • Charleston , SC • March 08, 2016

We actually were able to determine that one of the freezer switches was bad and taped it down for about 3 days. The beeping stopped. Our fridge has two freezer switches and one fridge side switch. I ordered all three from these guys. They were cheaper than Whirlpool by about $20 for parts and about $15 for shipping. The part numbers had superseded too many times to count, usually that doesn't matter but in this case it did. The new parts were just slightly bigger than the old parts AND... Read more

More
$27.37
Compare At:
$32.30
You Save:
$4.93

IN STOCK
Ships Today Guaranteed
Add to Cart
Dishwasher Door Interlock Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10274880

Fix a dishwasher that stops mid-cycle with a blinking start light. This door interlock switch restores reliable operation. 20-minute DIY repair.

Do-It-Yourself Stories from Customers like You Kenmore ultra wash dishwasher worked great for 18 months; then would not run start button blinked 3 times and nothing happened   Nick C. • Safety Harbor , FL • November 12, 2015

Looked online, appeared to be door switch or control panel. Tried door switch first, a $30 part. Installed new door switch and washer started right up and appears to be fixed. Have not tried full wash cycle yet, but problem appears to be fixed. I decided to buy part from AppliancePartsPros.com because I could return the part if it did not correct the problem, no one else offered such a deal. I will only deal with AppliancePartsPros in the future, they were extremely helpful on the phone! Read more

More
$50.57
Compare At:
$60.18
You Save:
$9.61

IN STOCK
Ships Today Guaranteed
Add to Cart
Laundry Center Cycle Selector Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10285512

Fix erratic or unresponsive cycle selections with this laundry center rotary encoder switch. Mounts behind the cycle knob to restore accurate settings.

Do-It-Yourself Stories from Customers like You Temperature control switch failed to cold only.   Marilyn M. • Summerfield , FL • September 30, 2017

Replaced with a new one. Read more

More
$83.44
Compare At:
$98.46
You Save:
$15.02

IN STOCK
Ships Today Guaranteed
Add to Cart
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store