Lint Screen Parts

This replacement screen fits into the appliance's filtration path. It captures debris to protect internal components and helps restore proper airflow or water flow when the original screen is torn, warped, clogged, or missing.

• Filters debris to prevent it from entering sensitive components such as pumps, blowers, or valves
• Helps maintain proper airflow or water circulation for consistent performance
• Common failure signs: torn mesh, cracked or warped frame, debris bypassing the screen
• Can contribute to longer cycles, reduced performance, or recurring clogs when damaged or missing

• Disconnect power to the appliance; turn off water supply if applicable
• Access the screen location per your model's instructions; remove the old screen and clean the housing
• Seat the new screen fully, ensuring correct orientation and that any tabs/locks engage
• Reassemble and test for proper operation; check for leaks or airflow restrictions

The Lint Filter is an OEM part for Whirlpool dryers. This essential component traps lint and debris from the clothes during the drying cycle, preventing these particles from clogging the dryer’s exhaust system and ensuring optimal drying performance.

Causes of a bad lint filter can include physical damage such as cracks or breaks, wear and tear from frequent use, or clogging due to an excessive buildup of lint that reduces its effectiveness.

Symptoms of a bad lint filter include:

• Lint buildup on clothes after drying
• Increased drying times
• The filter not fitting properly in its slot
• Visible damage or tears in the filter screen

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is the lint filter housing for select Samsung dryers. It forms the slot and duct where the lint screen sits, helping direct airflow and trap lint so the dryer dries efficiently and safely.

• Holds the lint screen securely and channels exhaust air through the filter area
• Helps maintain proper airflow for effective drying performance
• Damage or warping can lead to poor lint capture, longer dry times, or lint escaping into the drum
• Cracks or loose fit may cause snags at the filter opening

• Unplug the dryer before servicing; if gas, also shut off gas supply
• Open the door, remove the lint screen, and access mounting fasteners for the housing
• Transfer any reusable clips or seals from the old housing if present
• Verify the housing seats flush and the lint screen slides smoothly before use

The Pump Filter Assembly is an OEM replacement part for LG washing machines. It is a crucial component that filters out lint, debris, and other particles from the wash water, preventing them from recirculating and damaging the pump or other internal components.

Symptoms of a need to replace the pump filter assembly:

• Clogging or blockages, leading to poor drainage or water not draining completely
• Excessive buildup of lint, hair, or other debris in the filter screen
• Leaks or water seeping from the filter housing or surrounding area
•  Unusual noises or vibrations during the drain or spin cycles, indicating a potential blockage

Causes of a faulty pump filter assembly can include excessive lint accumulation, damage to the filter screen or housing due to impact or mishandling, and general wear and tear over time.

This OEM LG part is also compatible with Sears/Kenmore washing machines.

The Dryer Lint Filter Case is designed to keep your dryer running efficiently by securely housing the lint filter. This essential component helps prevent lint buildup, reducing the risk of clogs and potential fire hazards. Crafted as a genuine OEM part, it ensures a perfect fit and seamless integration with your Samsung dryer, maintaining the appliance's performance and longevity. The durable construction of the Lint Filter Case guarantees reliable operation, even with regular use. Installing this part is straightforward, allowing you to quickly restore your dryer's functionality without hassle. By replacing a damaged or worn-out filter case with this high-quality component, you enhance air flow and improve drying efficiency, saving both time and energy. Trust in the Dryer Lint Filter Case to provide the dependable protection and performance your Samsung dryer needs, ensuring your laundry routine remains smooth and effective.

The Lint Filter is an OEM part for Frigidaire dryers. This component is crucial for trapping lint and debris that come off clothes during the drying process. By capturing this lint, the filter prevents it from clogging the dryer’s internal mechanisms and vent, thereby enhancing the efficiency of the dryer and reducing the risk of fires. 

Symptoms of a bad Lint Filter include:

• Excessive lint escaping back into the dryer drum or venting system.
• Tears or holes in the filter mesh that fail to trap lint.
• Difficulty fitting the filter into its slot due to warping or damage.
• Longer drying times or overheating, indicating poor air flow.

Causes of a bad lint filter can include normal wear and tear from regular cleaning and use, accidental damage during removal or cleaning, or degradation from exposure to high heat.

The Lint Filter is an OEM replacement part for Frigidaire, Electrolux, Gibson, and Kenmore dryers.

The Inlet Hose Screen and Gasket is an OEM part for Whirlpool washing machines. This component is designed to filter debris from the water entering the machine and ensure a tight seal between the hose and the water inlet valve. By preventing debris from entering the washing machine, it helps to maintain the appliance's performance and longevity.

Causes of a bad inlet hose screen and gasket can include clogging from mineral deposits or debris, wear and tear over time, or damage due to improper installation or removal. A compromised screen or gasket can lead to reduced water flow and potential leaks.

Symptoms of a bad inlet hose screen and gasket include:

• Reduced water flow into the washing machine
• Visible debris or buildup on the screen
• Water leaks at the hose connection
• The washing machine not filling properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement screen filters out debris before it reaches critical components, helping maintain proper flow and overall performance. Replacing a damaged or clogged screen protects the system from blockages that can lead to poor operation. What it does:

• Traps particles to prevent clogs in passages, pumps, or valves
• Helps maintain proper water or air flow through the system
• Protects internal components from damage caused by debris
• Common signs it may need replacement: visible tears or warping, heavy buildup, recurring clogs, restricted flow, or related error codes

• 1 screen

• Disconnect power; shut off the water supply. Wear gloves and eye protection.
• Access the screen. Note orientation before removal and clean the area of any debris.
• Seat the new screen fully and evenly; do not force or bend it.
• Reassemble, restore power/water, and run a brief test to confirm proper operation and flow.

The Lint Filter is an OEM component for GE clothes dryers. Located inside the dryer cabinet behind the door, this filter screens lint and other debris from the air stream before it is recirculated during the drying cycle. Consistent lint filtering is essential for safety and performance.

Causes of a lint filter becoming clogged or damaged could be a failure to clean after each use, dryer vent duct restrictions slowing airflow, or material deterioration from heat and extended use.  

Symptoms of a bad lint filter include:

• Slow or inefficient drying times  
• Excessive warmth of the cabinet, burner housing or vent ductwork
• Burned lint smell or visible lint buildup in the duct or venting area
• Tripped thermal fuses or blown heating elements due to restricted airflow

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Washer Filter Plug Kit is an OEM replacement part for Whirlpool washing machines. This kit includes the necessary components to seal the filter housing and prevent leaks, ensuring that the washer operates efficiently. The filter plug helps to maintain the proper water flow and filtration within the washer, preventing debris from clogging the system and ensuring clean and effective washing cycles. The kit includes 4 plugs and replaces the round filter under the basket.

Over time, the filter plug can become worn or damaged due to continuous exposure to water, detergent, and the mechanical stress of the wash cycles. Improper installation or accidental impact during maintenance can also cause the plug to fail. These issues can lead to leaks and reduced efficiency of the washing machine.

Symptoms of a bad washer filter plug include:

• Water leaking from the bottom of the washer
• The washer not draining properly
• Visible cracks or damage to the filter plug
• Excessive noise during the wash cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement screen filters debris within your appliance to help protect internal components and maintain proper performance. A clean, intact screen supports consistent flow and reduces the risk of clogs or premature wear.

• Traps debris to help prevent clogs in the designated flow path
• Helps protect downstream parts such as valves, pumps, or passages
• A torn, missing, or clogged screen can contribute to reduced performance, unusual noises, slow flow, or error codes
• Restores proper flow when replaced with a new, clean screen

• Disconnect power and, if applicable, shut off water or gas before servicing
• Access the screen per your model's service information and note its orientation
• Clean the mating area and remove any debris before installing the new screen
• If the original screen used an O-ring or seal, transfer it if reusable or replace as needed; seat fully and check for leaks or proper operation

The Lint Filter is an OEM part for GE dryers. This filter captures lint and debris from the laundry load, preventing it from clogging the dryer vent and ensuring efficient airflow. Properly maintaining the lint filter helps improve drying performance, reduces energy consumption, and prevents potential fire hazards.

Causes of a bad lint filter can include tears or cracks from regular use, accumulation of lint and debris that cannot be cleaned out, or warping due to heat exposure. A compromised lint filter can lead to decreased drying efficiency and potential safety issues.

Symptoms of a bad lint filter include:

• Visible tears or holes in the filter mesh
• The filter not fitting securely in its slot
• Longer drying times
• Excess lint accumulation in the dryer drum or vent

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lint Filter is an OEM part for Whirlpool dryers. It is designed to trap lint and debris from the laundry during the drying cycle, preventing these particles from clogging the dryer vent and ensuring efficient operation.

You should replace this lint filter if it becomes damaged or worn out. Causes of a bad lint filter can include tears or holes in the mesh, warping from exposure to heat, or damage from mishandling. A compromised lint filter can lead to lint buildup in the dryer vent, increasing the risk of a fire hazard and reducing drying efficiency.

Symptoms of a bad Lint Filter include:

• Lint accumulating inside the dryer drum
• Longer drying times
• Noticeable damage or holes in the filter mesh

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dryer Lint Screen is an OEM part for Whirlpool dryers. It is designed to trap lint and debris from the drying process, preventing these particles from clogging the dryer vent and ensuring efficient airflow. This screen plays a crucial role in maintaining dryer performance and safety by reducing the risk of overheating and fires.

You should replace this lint screen if it becomes damaged or worn out. Causes of a bad lint screen can include tears or holes in the mesh, warping from excessive heat, or buildup of lint and debris that is difficult to clean.

Symptoms of a bad lint screen include:

• Lint escaping into the dryer drum
• Reduced drying efficiency
• Longer drying times
• The screen not fitting securely into its slot

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Lint Filter is an OEM component for Frigidaire dryers. As an important safety component, the lint filter screens out lint and other debris from the airflow before it exits the dryer. Trapping lint inside the filter helps reduce fire hazards and maintains peak airflow for more efficient drying performance.

Symptoms of a bad lint filter include:

• Excessive drying times as airflow is reduced
• Buildup of lint inside the dryer cabinet beyond the filter screen
• Lint escaping from the back of the dryer and collecting outside
• The lint filter itself is cracked or damaged

Causes of a lint filter issue include failure to clean the filter after each use, resulting in a blockage over time. Natural wear and tear or accidental damage can also render the filter unusable.

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Lint Filter Assembly is an OEM part for LG dryers. It is responsible for trapping lint and debris that come off clothes during the drying cycle, preventing these particles from clogging the dryer vent and ensuring efficient airflow.

Causes of a bad lint filter can include wear and tear over time, damage due to excessive heat, or physical damage from mishandling. Additionally, neglecting regular cleaning can lead to buildup that impairs its effectiveness.

Symptoms of a bad lint filter include:

• Longer drying times
• Excessive lint buildup inside the dryer
• Clothes not drying properly
• The filter being cracked or torn

This OEM LG part is also compatible with Sears/Kenmore models.