Generator Safety Switch Parts
Genuine Lg part
By: Lg
Part Number: EBF61314813
If your refrigerator light stays on or interior won't cool properly, the door switch may have failed. This magnetic switch detects door position.
More
$34.75
- Compare At:
-
$41.35
- You Save:
-
$6.60
Genuine Ge part
By: Ge
Part Number: WB23K34829
The Infinite Switch is an OEM part for GE electric ranges. It regulates precise temperature settings for the bake and surface elements. This is specifically for 6" inch elements.
Symptoms of a bad infinite switch include:
- Wide variations in cooking temperatures
- Failure to attain or maintain desired heat levels
- Non-working or faulty temperature selector dial
Causes can involve degraded metal contacts, worn internal components, or damaged wiring connections after extended use.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore electric range models.
Do-It-Yourself Stories from Customers like You
The red "burner on" signal light was on when all switches were turned off 3 of the 4 burners would heat up but one 8 inch burner would not heat and inspection showed a burned switch easy repair Harley W. • Holt , MO • January 10, 2015
Replaced the switch.
Read more
More
$56.95
- Compare At:
-
$67.77
- You Save:
-
$10.82
Genuine Frigidaire part
By: Frigidaire
Part Number: 154852501
This is the user control and display board located on the front panel of the dishwasher. It contains the buttons, display, and interface circuitry that allow you to select wash cycles, options, and monitor cycle status. Replace this board if the display is blank or flickering, buttons are unresponsive, or the dishwasher does not respond to cycle selections.
Do-It-Yourself Stories from Customers like You
Dishwasher electronics experiencing intermittent failures then complete failure i had power to the control board but no lights on panel etc Stephen H. • Fort Lauderdale , FL • July 12, 2016
I spoke with one of your sales people... ordered the control board and also the button board... ( for $50.00 , I'll replace it too while I'm in there ) .. The boards were here the next day, I installed them and the machine works better than ever ! Easy fix... outstanding sales lady, immediate delivery.
Read more
More
$113.95
- Compare At:
-
$135.60
- You Save:
-
$21.65
Genuine Ge part
By: Ge
Part Number: WH01X10621
Fix bleach pooling or uneven dispensing in your laundry center. This funnel directs bleach into the wash tub, preventing spills and odor issues.
More
$11.95
- Compare At:
-
$14.22
- You Save:
-
$2.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3356467
Washer won't fill properly or overfills? This water level pressure switch senses fill levels and signals when to stop. Easy DIY fix for cycle timing issues.
Do-It-Yourself Stories from Customers like You
Wash machine once in a while would stop running Daniel B. • Leesburg , FL • May 13, 2016
I found that turning the water level switch back and forth would activate the machine So I replaced the water level switch and the plastic hose that connected to it.
I purchased a clamp in the purchase, but it was the wrong size! There wasn't a clamp used in the original set up, so I installed the switch and hose without it! It was the video instructions and having the correct parts that made that made this a easy repair!
Thank You
Read more
More
$108.40
- Compare At:
-
$129.00
- You Save:
-
$20.60
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10215034
Fixes dual burner stuck on high, won't heat, or no inner ring control. This infinite switch restores precise temperature selection. 45-60 minute DIY repair.
Do-It-Yourself Stories from Customers like You
Burner didn't turn on Bruce H. • Granger , IN • August 18, 2015
I replaced both the element and the switch. It was a relatively easy fix, although I needed a second set of hands to hold the stovetop upright while I did the replacement. The entire job took about 45-60 minutes.
Read more
More
$161.78
- Compare At:
-
$192.52
- You Save:
-
$30.74
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002121
If your cooktop burner only works on high or won't adjust temperature, the infinite switch likely failed. DIY-friendly repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Right front double burner only worked on high!!!! Rolland F. • Brasher Falls , NY • September 21, 2014
Ordered the part and a few days later it arrived and I turned off the power and took a few screws out and unpluged the old one and pluged in the new .. Works like a charm.. Was very easy to fix....
Read more
More
$79.74
- Compare At:
-
$94.89
- You Save:
-
$15.15
Genuine Samsung part
By: Samsung
Part Number: DA34-10120E
Refrigerator light not turning on when door opens? The door switch detects door position to control interior lighting. Simple DIY replacement.
This part fixes the following symptoms
-
Light not working
-
Not dispensing water
-
Ice maker not making ice
See more...
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74011243
Burner stuck on high or won't heat? The infinite switch controls surface element power from low to high. Common DIY fix restores heat adjustment.
Do-It-Yourself Stories from Customers like You
No control of range burner burner was either off or on high no heat adjustment Robert B. • Toms River , NJ • September 06, 2014
Replaced infinite switch
Read more
More
$73.95
- Compare At:
-
$88.00
- You Save:
-
$14.05
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10168257
Fix a washer that won't advance cycles or gets stuck between rinse and spin. This cycle selector switch controls washing cycle progression.
More
$77.76
- Compare At:
-
$92.53
- You Save:
-
$14.77
Genuine Bosch part
By: Bosch
Part Number: 00414750
Fix a range hood fan stuck at full speed or not working with a new speed control switch. DIY repair typically takes 15-30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Fan worked but only at full speed. Bernard A. • Carmichael , CA • December 05, 2020
Turned off power. Removed cover over back of fan control switch. Unscrewed nut holding old switch in place. Removed clear plastic wire coverings. Hardest part of job. Photographed wires. Removed wires of old switch and replaced with wires from new switch. Had an extra green wire since old switch did not have a ground. Secured switch in panel with nut that came with it. Replaced cover on back of control switch. Turned on power and it now reduces the speed of the fan.
Read more
More
$132.31
- Compare At:
-
$158.77
- You Save:
-
$26.46
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293818
If your cooktop burner won't heat, stays on high, or won't turn off, a faulty burner control switch is often the cause. DIY repair in 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Failure of switch/controller on stove top. William S. • League City , TX • March 19, 2024
Ordered the switch from AppliancePartsPros.com and received promptly.
Read more
More
$67.95
- Compare At:
-
$80.86
- You Save:
-
$12.91
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304468224
Do-It-Yourself Stories from Customers like You
The micro switch on the door clasp failed second time in 10 years John P. • Mcdonough , GA • June 23, 2018
Checked on AppliancePartsPros and found the parts, once I received the parts I pulled the outer cover of the microwave and replaced the three switches. For the price of the three switches it was cheaper to install all new. Total repair time, 15 minutes. Microwaves back up and running.
Very easy fix.
Read more
More
$66.55
- Compare At:
-
$78.53
- You Save:
-
$11.98
Genuine Speed Queen part
By: Speed Queen
Part Number: 55882
This is a start switch intended for use with dryers. With time or because of damage caused by accident, the start switch may stop working correctly. If the start switch isn't working, then the dryer will not function properly, and a replacement part should be ordered. If the push to start switch doesn't respond, it could be damaged or broken. Replacing the push to start switch on a dryer is a simple process. Start by unplugging the machine. Remove the back panel and pull out the old push to start button. Put the new button in its place and reattach the rear panel. Wear gloves for protection. Restore power only after the complete reassembly is performed. This push-to-start button is a genuine OEM replacement part. It is sold as an individual unit. The part is sourced from the manufacturer and made of durable materials. The push-to-start button can be installed in various dryer models made by SpeedQueen and Alliance brands.
More
$51.59
- Compare At:
-
$61.39
- You Save:
-
$9.80
Genuine Frigidaire part
By: Frigidaire
Part Number: 808136601
This is a door-activated switch that detects whether the oven door is open or closed. It controls functions such as the oven light or signals the control board about door position. Replace this switch if the oven light stays on or off regardless of door position, or if the oven does not operate correctly due to a faulty door signal.
Do-It-Yourself Stories from Customers like You
Oven light would never turn off. Raul R. • Northlake , IL • March 15, 2018
Bought a door light switch from your company and used it to replace the bad one from my stove.
Read more
More
$52.46
- Compare At:
-
$62.43
- You Save:
-
$9.97
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21001554
Fix washer overflowing or not stopping fill cycle. This water level pressure switch senses tub water and signals control to stop filling. DIY repair.
Do-It-Yourself Stories from Customers like You
Tub was overfilling and water would not stop until machine turned off replaved water level valve but did not solve problem Kirk N. • Oak Island , NC • April 19, 2014
Filled tub to about 6 inches and inspected washer. Noticed that the tube leading from the air entrapment bubble on the exterior side of the drum had a small leak in it. Clipped off the part of the tube that had the hole in it(it was very close to the connector nipple) reconnected and problem was solved.
Read more
More
$118.53
- Compare At:
-
$141.05
- You Save:
-
$22.52