Yard Machine Small Engine Start Switch Parts
Genuine Ge part
By: Ge
Part Number: WR07X10097
Fix clicking sounds and warm temps with this start relay and overload protector. Controls compressor start-up and prevents overheating. 15-minute DIY fix.
Do-It-Yourself Stories from Customers like You
Would not run led dimmed condenser fan would not run Pete M. • Santa Fe , NM • May 16, 2015
We replaced the main circuit board and the LED started to work and the condenser fan worked, but all we had were relay clicking sounds, but no cooling. The compressor had become so hot trying to work when the main circuit board was amiss, that it had popped the over temperature sensor on its side. As some one point out, if you remove the PTC+OLP assembly with the capacitor on it, and shake it, you will hear a rattle inside---and that is bad. We ordered a second round of parts from...
Read more
More
$113.95
- Compare At:
-
$135.60
- You Save:
-
$21.65
Genuine Ge part
By: Ge
Part Number: WR09X10105
Fridge won't cool and makes clicking sounds? The compressor overload may have failed. Protects against overheating. DIY repair takes 15-45 minutes.
Do-It-Yourself Stories from Customers like You
Tripped circuit breaker the no cooling or operation Dennis L. • Prague , NE • October 27, 2019
I replaced the overload which was burned up by constantly resetting because the condenser fan motor was not running properly so I replaced that as well.
Read more
More
$51.46
- Compare At:
-
$61.24
- You Save:
-
$9.78
Genuine Frigidaire part
By: Frigidaire
Part Number: 134762000
Fix E32 error codes or washer stopping during fill with this water level pressure switch. Senses water level and controls fill cycles. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Washer would stop after about 30 second on fill cycle diagnostic code of e32 Kenneth B. • Friendswood , TX • June 04, 2016
The E32 diagnostic code that the Frigidaire washer was throwing after a quick water fill attempt was not in the supplied Data Sheet that came with the washer and Frigidaire would not provide and updated Data Sheet because, "it's a liabiliity issue" was their statement, but they did tell me that the problem was in the Fill Pressure Sensor/Wire Harness or the Main Control Board (the display board). I ordered the Pressure Sensor and Main Control Board from AppliancePartsPros after checking...
Read more
More
$89.74
- Compare At:
-
$106.79
- You Save:
-
$17.05
Genuine Frigidaire part
By: Frigidaire
Part Number: 154852501
This is the user control and display board located on the front panel of the dishwasher. It contains the buttons, display, and interface circuitry that allow you to select wash cycles, options, and monitor cycle status. Replace this board if the display is blank or flickering, buttons are unresponsive, or the dishwasher does not respond to cycle selections.
Do-It-Yourself Stories from Customers like You
Dishwasher electronics experiencing intermittent failures then complete failure i had power to the control board but no lights on panel etc Stephen H. • Fort Lauderdale , FL • July 12, 2016
I spoke with one of your sales people... ordered the control board and also the button board... ( for $50.00 , I'll replace it too while I'm in there ) .. The boards were here the next day, I installed them and the machine works better than ever ! Easy fix... outstanding sales lady, immediate delivery.
Read more
More
$113.95
- Compare At:
-
$135.60
- You Save:
-
$21.65
Genuine Frigidaire part
By: Frigidaire
Part Number: 241835505
Interior light won't turn on when door opens? This push-button door switch restores automatic lighting. Moderate DIY repair with basic tools.
More
$87.95
- Compare At:
-
$105.54
- You Save:
-
$17.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 316219019
This wiring harness routes power and control signals between key components inside your range or wall oven. Replace a damaged harness to restore safe, reliable operation and prevent intermittent heat, shorts, or non-working burners and oven functions.
- Distributes electrical power and signals between controls, switches, heating elements/igniters, and safety components
- Maintains correct connector orientation and wire routing for dependable operation
- Typical symptoms: no heat in oven or on surface burners, intermittent operation, breaker tripping, or visible burnt/melted wiring
- Restores stable connections to reduce arcing and overheating
What's included: One wiring harness assembly. Install notes:
- Disconnect power at the circuit breaker; for gas ranges, also shut off the gas supply
- Label or photograph all connections and transfer one wire at a time to avoid miswiring
- Route the harness exactly as original; keep away from sharp edges and hot surfaces; secure with existing clips/ties
- If connectors don't match or any terminals are heat-damaged, stop and inspect mating components.
Do-It-Yourself Stories from Customers like You
One of the burners wasn't doing the ignition Juan Carlos A. • Brooklyn , NY • October 30, 2016
Replaced the wiring harness
Read more
More
$74.31
- Compare At:
-
$87.69
- You Save:
-
$13.38
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304491583
This controller kit is the appliance's main electronic control. It reads inputs from the user interface and sensors to power and coordinate key components. Replacing a failed controller restores responsive controls and consistent, reliable operation.
- Interprets commands from the keypad and sensors to manage operation
- Controls relays powering motors, fans, compressor, or valves as designed
- Coordinates modes and cycle timing for proper performance
- Common symptoms: dead or blank display, unresponsive buttons, won't start, intermittent shutdowns, or error codes
What's included: 1 controller kit Installation notes:
- Disconnect power at the breaker or unplug the appliance before servicing
- Handle the board with ESD precautions; avoid touching connectors and components
- Photograph/label wire connections and transfer them one at a time to the new board
- After installation, verify any model-specific settings per the service documentation before testing
Do-It-Yourself Stories from Customers like You
Feezor would not run Russell B. • Groton , CT • February 15, 2016
Replaced controller and starter relay
Read more
More
$88.95
- Compare At:
-
$105.85
- You Save:
-
$16.90
Genuine Samsung part
By: Samsung
Part Number: DA34-10120E
Refrigerator light not turning on when door opens? The door switch detects door position to control interior lighting. Simple DIY replacement.
This part fixes the following symptoms
-
Light not working
-
Not dispensing water
-
Ice maker not making ice
See more...
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4456836
This blower speed switch lets you select the blower/fan speed to restore proper airflow control in your appliance. It replaces a worn or faulty speed selector so the blower will respond correctly when you change settings. What it does:
- Controls the blower/fan speed so the appliance can run at selectable airflow levels
- Replaces a switch that is stuck, unresponsive, or only running at one speed
- Restores reliable electrical connection between the control circuit and blower motor
- Helps eliminate intermittent fan operation or loss of speed selection
What's included: One blower speed switch Install notes:
- Disconnect power to the appliance before starting any repair.
- Verify wiring placement and retain original fasteners; wiring diagram for correct connections.
- Handle terminals carefully to avoid bending or damaging contacts.
Do-It-Yourself Stories from Customers like You
Broken fan switch on my kitchenaid electric cooktop Joseph H. • Winter Haven , FL • May 12, 2014
Went on line to find the part number. Once I had the number I searched for the part. Found it, had it shipped overnight and installed it with the help of a video from youtube.
Read more
More
$120.56
- Compare At:
-
$143.47
- You Save:
-
$22.91
Genuine Ge part
By: Ge
Part Number: WB23K34829
The Infinite Switch is an OEM part for GE electric ranges. It regulates precise temperature settings for the bake and surface elements. This is specifically for 6" inch elements.
Symptoms of a bad infinite switch include:
- Wide variations in cooking temperatures
- Failure to attain or maintain desired heat levels
- Non-working or faulty temperature selector dial
Causes can involve degraded metal contacts, worn internal components, or damaged wiring connections after extended use.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore electric range models.
Do-It-Yourself Stories from Customers like You
The red "burner on" signal light was on when all switches were turned off 3 of the 4 burners would heat up but one 8 inch burner would not heat and inspection showed a burned switch easy repair Harley W. • Holt , MO • January 10, 2015
Replaced the switch.
Read more
More
$56.95
- Compare At:
-
$67.20
- You Save:
-
$10.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2183456
Refrigerator not cooling or compressor won't start? This overload protector prevents motor damage from overheating. DIY-friendly fix in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Refrigerator stopped working Patrick H. • Walland , TN • July 04, 2016
Used a muiltimeter to test all parts and ohm'ed out all parts. found out condenser fan motor seized up [open winding in motor] replaced that, and found that also caused the compressor overload and relay to fail, from over heating and over cycling, replaced both parts, powered up the refrigerator retested all electrical parts checked amp reading on all parts under load conditions,works good know, hope to get another 15 years out of this refrigator, its a maytag. over 20 years old.
Read more
More
$68.95
- Compare At:
-
$82.05
- You Save:
-
$13.10
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74011243
Burner stuck on high or won't heat? The infinite switch controls surface element power from low to high. Common DIY fix restores heat adjustment.
Do-It-Yourself Stories from Customers like You
No control of range burner burner was either off or on high no heat adjustment Robert B. • Toms River , NJ • September 06, 2014
Replaced infinite switch
Read more
More
$73.95
- Compare At:
-
$88.00
- You Save:
-
$14.05
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002794
Refrigerator making clicking sounds and not cooling? This overload relay kit fixes compressor start problems. Easy DIY repair—pull off old relay and install.
Do-It-Yourself Stories from Customers like You
My compressor relay on my refrigerator failed Jared W. • Mchenry , IL • February 19, 2015
I was able to pull off the old relay and swap out with the new relay. Everything went together perfectly.
Read more
More
$111.44
- Compare At:
-
$132.61
- You Save:
-
$21.17
Genuine Lg part
By: Lg
Part Number: EBF61314813
If your refrigerator light stays on or interior won't cool properly, the door switch may have failed. This magnetic switch detects door position.
More
$34.75
- Compare At:
-
$41.35
- You Save:
-
$6.60
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10168257
Fix a washer that won't advance cycles or gets stuck between rinse and spin. This cycle selector switch controls washing cycle progression.
More
$77.76
- Compare At:
-
$92.53
- You Save:
-
$14.77
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10215034
Fixes dual burner stuck on high, won't heat, or no inner ring control. This infinite switch restores precise temperature selection. 45-60 minute DIY repair.
Do-It-Yourself Stories from Customers like You
Burner didn't turn on Bruce H. • Granger , IN • August 18, 2015
I replaced both the element and the switch. It was a relatively easy fix, although I needed a second set of hands to hold the stovetop upright while I did the replacement. The entire job took about 45-60 minutes.
Read more
More
$161.78
- Compare At:
-
$190.90
- You Save:
-
$29.12