Briggs Stratton Small Engine Start Switch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002121
If your cooktop burner only works on high or won't adjust temperature, the infinite switch likely failed. DIY-friendly repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Right front double burner only worked on high!!!! Rolland F. • Brasher Falls , NY • September 21, 2014
Ordered the part and a few days later it arrived and I turned off the power and took a few screws out and unpluged the old one and pluged in the new .. Works like a charm.. Was very easy to fix....
Read more
More
$79.74
- Compare At:
-
$94.89
- You Save:
-
$15.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 241707709
Refrigerator clicking but not cooling? A failed compressor starter prevents reliable startup. This part restores proper cooling by helping the compressor start.
More
$70.95
- Compare At:
-
$84.43
- You Save:
-
$13.48
Genuine Lg part
By: Lg
Part Number: EBF61314813
If your refrigerator light stays on or interior won't cool properly, the door switch may have failed. This magnetic switch detects door position.
More
$34.75
- Compare At:
-
$41.35
- You Save:
-
$6.60
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8543274
Dryer won't start when you press the button? This push-to-start switch closes the circuit to begin cycles. Easy DIY repair restores reliable starting.
Do-It-Yourself Stories from Customers like You
Start switch replacement George Z. • Sebastian , FL • December 14, 2020
I have an old dryer. My wife wanted a new washer and dryer but I keep repairing the old ones. Not because I have to, but because I want to, it's personal now. Can't let my old dryer beat me down. We have pushed that old Start-Stop switch so many times it just wore out. Bing-bang-boom...it was simple.
Read more
More
$56.34
- Compare At:
-
$67.04
- You Save:
-
$10.70
Genuine Bosch part
By: Bosch
Part Number: 00414750
Fix a range hood fan stuck at full speed or not working with a new speed control switch. DIY repair typically takes 15-30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Fan worked but only at full speed. Bernard A. • Carmichael , CA • December 05, 2020
Turned off power. Removed cover over back of fan control switch. Unscrewed nut holding old switch in place. Removed clear plastic wire coverings. Hardest part of job. Photographed wires. Removed wires of old switch and replaced with wires from new switch. Had an extra green wire since old switch did not have a ground. Secured switch in panel with nut that came with it. Replaced cover on back of control switch. Turned on power and it now reduces the speed of the fan.
Read more
More
$132.31
- Compare At:
-
$156.13
- You Save:
-
$23.82
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304468224
Do-It-Yourself Stories from Customers like You
The micro switch on the door clasp failed second time in 10 years John P. • Mcdonough , GA • June 23, 2018
Checked on AppliancePartsPros and found the parts, once I received the parts I pulled the outer cover of the microwave and replaced the three switches. For the price of the three switches it was cheaper to install all new. Total repair time, 15 minutes. Microwaves back up and running.
Very easy fix.
Read more
More
$66.55
- Compare At:
-
$79.86
- You Save:
-
$13.31
Genuine Lg part
By: Lg
Part Number: EBF61734701
This micro switch is a compact, snap-action electrical switch that sends an on/off signal when a lever, latch, or paddle is moved. Replacing a worn switch restores reliable detection and control response for the affected function.
- Converts mechanical movement into an electrical open/close signal to the control
- Commonly used for lever/paddle actuators, latches, or interlock detection within the appliance
- Safe symptom clues: no response when actuated, intermittent operation, or a function stuck on/off
- Physical clues: weak or absent "click" when pressed, heat discoloration or damage at terminals
What's included: 1 micro switch
- Disconnect power before servicing; if the product is connected to a water line, close the supply valve
- Note wire positions and terminal labels (COM/NO/NC); transfer wires one at a time to matching terminals
- Match the actuator orientation and mounting position to the original for proper operation
- After installation, verify continuity with a multimeter and test function before reassembly
Do-It-Yourself Stories from Customers like You
Sensor on dryer and refridgeator bad Perry S. • Jackson , TN • November 14, 2015
Take section applicable apart, test and replace parts.
Read more
More
$21.72
- Compare At:
-
$26.06
- You Save:
-
$4.34
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21001554
Fix washer overflowing or not stopping fill cycle. This water level pressure switch senses tub water and signals control to stop filling. DIY repair.
Do-It-Yourself Stories from Customers like You
Tub was overfilling and water would not stop until machine turned off replaved water level valve but did not solve problem Kirk N. • Oak Island , NC • April 19, 2014
Filled tub to about 6 inches and inspected washer. Noticed that the tube leading from the air entrapment bubble on the exterior side of the drum had a small leak in it. Clipped off the part of the tube that had the hole in it(it was very close to the connector nipple) reconnected and problem was solved.
Read more
More
$118.53
- Compare At:
-
$139.87
- You Save:
-
$21.34
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3148955
Fix a burner that won't turn off, stays on high, or won't heat. This infinite switch restores precise temperature control for electric cooktop elements.
Do-It-Yourself Stories from Customers like You
Electric burner control switch William F. • Teutopolis , IL • March 08, 2017
Turn the power off to the range. Pull off the black control knob. Remove 6 - 5/16 screws in back of the range behind the controls panel. Take out 2 screws (behind the control knob) in front that hold the control swirch in the panel. Remove each wire from the old switch and place it onto the new switch (one at a time)so get the wires are installed in the correct place. Make sure the wire are tight on the new switch. Install the new switch, put the two mounting screws in, reinstall the back, put...
Read more
More
$87.60
- Compare At:
-
$103.37
- You Save:
-
$15.77
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10085220
Washer won't start or shows electrical faults? A failed ground switch disrupts the safety circuit. This switch restores proper grounding for reliable operation.
Do-It-Yourself Stories from Customers like You
The code was f20 which means not enough water flow. Bruno R. • Franklin Square , NY • April 10, 2021
Watched YouTube and ordered parts then replaced the parts and walla !!!! All was good.
Read more
More
$21.34
- Compare At:
-
$25.61
- You Save:
-
$4.27
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002782
Refrigerator not cooling or making clicking sounds? This compressor relay and overload kit fixes starting issues. DIY repair takes about 30 minutes.
Do-It-Yourself Stories from Customers like You
About 9:30 pm on a friday night two weeks ago i noticed my freezer part in the refrigerator was not holding the cold and ice cream had become liquid! Hemant P. • Arlington , VA • September 12, 2014
I have a Maytag Model PTB1952GRQ Serial Number 11003378AJ Top / Bottom refrigerator. It suddenly stopped working and would no longer be freezing / cooling as a result of a failure of the compressor not starting. I was very upset and went to the web site of appliancepartspros.that had a lot of helpful information available. I also visited many other sites and researched / read and looked at all kinds of information on the we sites. A lot of information was pointing to the fact that the...
Read more
More
$75.95
- Compare At:
-
$90.38
- You Save:
-
$14.43
Genuine Frigidaire part
By: Frigidaire
Part Number: 216954200
This is a start relay device that attaches to the compressor and provides the initial electrical boost needed to start the compressor motor. It works in conjunction with the run capacitor to get the compressor running and then disengages once the motor reaches operating speed. Replace this device if the refrigerator is not cooling, the compressor clicks on and off repeatedly, or you hear a buzzing sound coming from the back of the unit.
Do-It-Yourself Stories from Customers like You
Trying to start and relay or overload just clicking off and on William K. • Morganton , NC • November 28, 2015
Works perfect now
Read more
More
$62.51
- Compare At:
-
$75.66
- You Save:
-
$13.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 241707705
Refrigerator won't cool or compressor clicks but won't start? This PTC start relay powers the compressor's start winding. Common DIY fix, restores cooling.
Do-It-Yourself Stories from Customers like You
Both overload and run capacitor burnt out Sione T. • Washington , DC • September 02, 2017
I ordered the compressor starting device kit and run capacitor to replace the burnt parts. It works right off the bat! The parts are for a Kenmore fridge/freezer. Saves Money and a trip to Dumping place. Great product and great Price. This is the second time I fix friends fridge/freezer with this repair kit from this site. Great Service!
Read more
More
$48.95
- Compare At:
-
$58.74
- You Save:
-
$9.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293818
If your cooktop burner won't heat, stays on high, or won't turn off, a faulty burner control switch is often the cause. DIY repair in 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Failure of switch/controller on stove top. William S. • League City , TX • March 19, 2024
Ordered the switch from AppliancePartsPros.com and received promptly.
Read more
More
$67.95
- Compare At:
-
$80.86
- You Save:
-
$12.91
Genuine Speed Queen part
By: Speed Queen
Part Number: 55882
This is a start switch intended for use with dryers. With time or because of damage caused by accident, the start switch may stop working correctly. If the start switch isn't working, then the dryer will not function properly, and a replacement part should be ordered. If the push to start switch doesn't respond, it could be damaged or broken. Replacing the push to start switch on a dryer is a simple process. Start by unplugging the machine. Remove the back panel and pull out the old push to start button. Put the new button in its place and reattach the rear panel. Wear gloves for protection. Restore power only after the complete reassembly is performed. This push-to-start button is a genuine OEM replacement part. It is sold as an individual unit. The part is sourced from the manufacturer and made of durable materials. The push-to-start button can be installed in various dryer models made by SpeedQueen and Alliance brands.
More
$46.01
- Compare At:
-
$50.61
- You Save:
-
$4.60
Genuine Frigidaire part
By: Frigidaire
Part Number: 808136601
This is a door-activated switch that detects whether the oven door is open or closed. It controls functions such as the oven light or signals the control board about door position. Replace this switch if the oven light stays on or off regardless of door position, or if the oven does not operate correctly due to a faulty door signal.
Do-It-Yourself Stories from Customers like You
Oven light would never turn off. Raul R. • Northlake , IL • March 15, 2018
Bought a door light switch from your company and used it to replace the bad one from my stove.
Read more
More
$52.46
- Compare At:
-
$61.90
- You Save:
-
$9.44