Timer Control Knob Parts

Downloaded the Frigidaire Service Manual for Electric 5.8 cubic foot dryer from the ApplicanePartsPro.com forum. Used its information to check for error codes. None display. Ran the function test sequence. All the tests OK. Used a mutli-meter to check the circuit to the moisture sensor bars inside the door. Thought maybe the circuit could be open due to a loose plug or broken wire. This could signal the control board that the clothes are dry. This all checked OK. Since the top four... Read more

The washing machine intermittently would not agitate or spin. A reset of the timer dial fixed it. Then nothing fixed it. Originally thought it was the timer but father wanted to check out other possibilities. So he brought his meter over and went through all that he could, including checking power to the motor below. All was good electrical-wise. On the holiday, January 1, a rep. at AppliancePartsPros assured me that if a new timer did not fix the problem, I could return the item, even... Read more

Ordered a new one Read more

Replaced the cheap plastic lever supporter with another LG OEM cheap plastic lever supporter. I should have bought two as I can see this problem happening again. Job was a simple fix and only required a Phillips head screwdriver. I did not need to remove any connections as there was enough room and wire to pull out the oven control assembly and make the repair. One word of caution is to be careful as the sheet metal internal cover and bottom of the control knob panel is razor... Read more

I replaced the Controller. And it did the trick. Read more

• Frost buildup

Replaced all 3 circuit boards and now waiting two weeks to see if the problem returns or not... Read more

My stove is probably 15 years old and when I was removing the screws that hold the burner in place on top of the stove top, both of them broke off so I had to replace the entire assembly. APP had all the parts I needed and were helpful on the phone. However when I was attempting to loosen the gas line to the burner the tubing wouldn't release from the brass nut and the tubing twisted too much. Even though it didn't appear broken I wasn't comfortable knowing the metal was surely weakened so I... Read more

Ordered replacement knobs from this website and they came in one day! I was able to replace the knobs and everything is fine. They are better quality than was originally on the stove to begin with. Read more

I initially purchased a door switch, thinking that it would solve the problem. I replaced the switch by removing the top 6 star screws, removing the component cover and removing one of the door switches (using a 3/16 socket) with the new one that I bought but I still had the problem. Looking at the schematic, the next part that needed to be changed is the electronic control board, which I purchased. I removed the same screws again and cover, used a screwdriver to pull back the clips holding... Read more