Run Vent Push Button Switch Parts
Genuine Ge part
By: Ge
Part Number: WB24T10165
The Rocker Switch is an OEM part for GE ranges. This switch is used to control the surface heating elements, allowing users to turn them on or off and adjust the heat levels. It is designed to fit securely into the range's control panel, providing reliable operation and ease of use.
Causes of a bad switch rocker element can include regular wear and tear, electrical issues, or damage from spills or high temperatures. Over time, the internal contacts of the switch can degrade, leading to malfunction.
Symptoms of a bad switch rocker element include:
- The heating element not turning on or off
- Difficulty in adjusting the heat levels
- The switch feeling loose or unresponsive
- Flickering or intermittent operation of the heating element
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The burner size switch was bad Charles P. • Okeechobee , FL • October 16, 2015
Replaced the switch took a total of about five minutes. I pulled the stove out and turned the breaker off so I only had to pull it out enough to get a 1/4 " nut driver in behind it. Removed three screws and the back cover came off. I pushed the switch threw from the back and switched over the two wires then reversed the process. Completely easy if you can use a screw driver your crazy not to replace it yourself
Read more
More
$50.95
- Compare At:
-
$60.63
- You Save:
-
$9.68
Genuine Frigidaire part
By: Frigidaire
Part Number: 316220009
Replace your broken, cracked, or missing gas range burner control knob. This knob mounts on the control panel to adjust flame settings. Easy DIY fix.
Do-It-Yourself Stories from Customers like You
Old worn stove knobs Tracy B. • Philadelphia , PA • June 10, 2015
I ordered new knobs to make the stove look like new! Looks great! I had a wonderful experience using your webpage and ordering the new parts. :-)
Read more
More
$53.21
- Compare At:
-
$63.32
- You Save:
-
$10.11
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293831
Burner overheating or stuck on high? This infinite switch regulates temperature by cycling power on and off. Common fix for unresponsive heat control.
Do-It-Yourself Stories from Customers like You
Defective switch elements burned out Leslie G. • Columbia , SC • March 18, 2019
I had one element that would operate wide open when turned on the low setting. It needed the switch replaced. Since I was replacing other elements I went ahead replaced them all, adding new drip pans and wiring kits to each new element. Once I replaced everything I was still having issues with the element that had the switch replaced. After further investigation my AC voltage readings were not correct at this element. I traced the problem back to the Molex connector feeding voltage to the...
Read more
More
$71.67
- Compare At:
-
$85.29
- You Save:
-
$13.62
By: Pro
Part Number: TJ725RBFFP
Replacement water fill hoses for washing machines. Connect home water supply to washer. Replace when cracked, leaking, or showing rubber wear or corrosion.
Do-It-Yourself Stories from Customers like You
Washer would not spin nor adgitate Jeff A. • Stow , OH • June 28, 2015
Motor control board was flashing 4 times, indicating that the mode shifter had an error. I disconnected the mode shifter's wire from the controller and measured the resistance between the 2 leads with an ohmmeter. Since the reading was infinite, that meant that the mode shifter coil or in-line thermal sensor was electrically open, i.e. bad. As this fix is near a complete tear-down of the washing machine, here are a few tips I discovered. 1) the hub nut is difficult to remove and you need a...
Read more
More
$13.71
- Compare At:
-
$16.31
- You Save:
-
$2.60
Genuine Ge part
By: Ge
Part Number: WH12X955
Fix a washer that won't spin or drain with this lid switch replacement. This safety switch activates when the lid closes. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
The problem was the water wouldn't drain and I found out using the internet that it was probably the lid switch. I used a screwdriver to push down on the lid switch and the water drained. Ricardo R. • Clermont , FL • March 13, 2014
I ordered the lid switch and I recieved it within (2) days, I installed it and our washer is running again. Thanks to appliancepartspros.com. This is my second time that I have ordered a part from them at a reasonable price and quick delivery,I will use them again if I need another part for any of my appliances.
Ricardo J. Rios
Read more
More
$112.45
- Compare At:
-
$134.94
- You Save:
-
$22.49
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10251394
This is a control knob used on a dryer to select cycle settings or timer functions. It fits onto the control panel shaft and allows you to turn and select the desired drying cycle. Replace this knob if it is cracked, broken, or no longer grips the shaft properly, making it difficult to start or change dryer cycles.
Do-It-Yourself Stories from Customers like You
Broken knob whirlpool washer Brendan D. • Pleasanton , CA • November 28, 2017
Ordered new knob.
Read more
More
$52.68
- Compare At:
-
$62.69
- You Save:
-
$10.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10424308
The Push Button is an OEM part for Whirlpool Laundry Centers. This part starts the wash or dry process, and making adjustments to settings. The push button is engineered for durability and a precise fit, ensuring it integrates seamlessly with the appliance's control panel.
Causes of a malfunctioning push button can include repeated use leading to wear and tear, accumulation of lint or detergent residue affecting its functionality, or damage to the button's contacts or the control panel circuitry.
Symptoms of a bad Push Button include:
- Difficulty in engaging the desired cycle or setting
- The button feeling stuck or failing to return to its original position after being pressed
- The appliance not responding to button presses, resulting in an inability to start or modify cycles
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken controls and noisy dryer Mike H. • Boise , ID • September 30, 2019
Replaced control buttons on 2 washers and 2 dryers
Read more
More
$16.95
- Compare At:
-
$20.34
- You Save:
-
$3.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304526190
Burner not heating or stuck on? This surface element switch controls power to individual cooking elements. Moderate DIY repair requires lifting cooktop.
More
$69.95
- Compare At:
-
$82.54
- You Save:
-
$12.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22003804
Washer won't spin or stops mid-cycle? A faulty lid switch prevents operation when the lid is bumped or opened. Simple snap-in replacement restores cycles.
Do-It-Yourself Stories from Customers like You
Washer didn't spin during spin cycle Ronney S. • Miami , FL • February 09, 2017
I had removed three screws behind the control board cover of the washer, to access the old lid switch. I checked the continuety of the of the switch with a multimeter and it obviously failed the the test by displaying infinity of <1, rather than being 0. I removed the old switch with a flathead screw driver, I tested the new one and installed it in no time. Problem solved!!!
Read more
More
$58.95
- Compare At:
-
$70.15
- You Save:
-
$11.20
Genuine Whirlpool part
By: Whirlpool
Part Number: 279782
Dryer won't start but has power and timer works? This belt switch kit stops the dryer when the belt breaks. Moderate DIY repair, 45-60 minutes.
Do-It-Yourself Stories from Customers like You
Broken belt switch Jack F. • Hermosa Beach , CA • July 08, 2016
Every time I tried to start our dryer, the "Sensing Light" came on, I heard a little "click," and the dryer would not start.
According to the very helpful Appliance Parts Pros. videos, I was able to dismantle, diagnose a few components, and discover the broken part. In this case, it was a Broken Belt Switch.
I ordered the part, we went on vacation for a week, and when we returned home the part was at our residence. The next day, I installed the part and all is good now.
I am nearly 70 years...
Read more
More
$54.25
- Compare At:
-
$64.56
- You Save:
-
$10.31
Genuine Frigidaire part
By: Frigidaire
Part Number: 318569904
Replacement control knob for gas cooktop burners. Installs on the control shaft to adjust burner settings. Needed when original is cracked or broken.
Do-It-Yourself Stories from Customers like You
Knobs went bad. Partha S. • Richmond , TX • June 27, 2021
Fixed myself.
Read more
More
$75.95
- Compare At:
-
$90.38
- You Save:
-
$14.43
Genuine Ge part
By: Ge
Part Number: WB03X10208
Control knob for range hood fan speed and light settings. Replaces broken, cracked, or missing knobs. Installs on control panel with half-circle mount.
Do-It-Yourself Stories from Customers like You
One knob was missing other was broken James A. • Modesto , CA • October 23, 2015
Replaced knobs with the ones ordered they were exact replacement and worked great.
Read more
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Genuine Ge part
By: Ge
Part Number: WH41X26574
Drain hose assembly routes wastewater from the washer pump to your standpipe or laundry tub. Replace if cracked, kinked, leaking, or causing floor puddles.
Do-It-Yourself Stories from Customers like You
Drain hose on ge space saver washer dryer combo Al W. • Sanibel , FL • July 29, 2016
First of you need to remove front panel of the washer, using a putty knife push the tabs between the top of the machine and the front panel. Once front panel is exposed drain hose is connected to pump which is in the front of the machine,very easy to access with the front off. Remove old hose with pliers and discard ,run new hose thru outlet on the back of the machine and secure new hose to drain and secure hose to the machine, reinstall front panel of washer and that's it
Read more
More
$57.95
- Compare At:
-
$69.54
- You Save:
-
$11.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP330190
Replace your broken, cracked, or missing range top burner control knob. Installs on the control panel to adjust surface element temperature settings.
Do-It-Yourself Stories from Customers like You
The surface switch unit broke Debbie F. • Parkersburg , WV • June 29, 2015
I got on the internet and found AppliancePartsPros.com. I called and talked to a gentleman in the parts department. He was very knowledgeable about the part I needed and was helpful in placing the part order for me. He also told me about a feature AppliancePartsPros.com had, the video to help customers replace their parts. Great for diy customers. Another great thing about my order was , I place my order early one morning and I received the part the very next day. GREAT SERVICE!!!!!!!!! Will...
Read more
More
$29.48
- Compare At:
-
$34.79
- You Save:
-
$5.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10339443
This is a white plastic control knob designed for a range cooktop surface burner. It attaches to the burner valve stem and allows you to adjust the flame or heat level. Replace this knob if it is cracked, discolored, loose on the stem, or if the printed markings have worn off, making it difficult to set the correct heat setting.
Do-It-Yourself Stories from Customers like You
Knob was broke Peter D. • Kirkville , NY • July 27, 2018
PULL BROKE KNOB REPLACE WITH NEW KNOB.
Read more
More
$52.68
- Compare At:
-
$62.69
- You Save:
-
$10.01
Genuine Bosch part
By: Bosch
Part Number: 00189008
Burner won't spark or ignite? This spark switch signals the ignition module to light gas burners. Common DIY repair with basic tools, 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Ignition spark would not work n one burner Shenton O. • Seattle , WA • September 28, 2017
Took out igniter module and porcelain was cracked. Replaced with ordered part and it worker fine!
Read more
More
$35.95
- Compare At:
-
$42.78
- You Save:
-
$6.83