Yard-Main Small Engine Ignition Coil Parts

Restore reliable, even heat to a single cooking zone with this surface heating element. It replaces a failed top burner element on an electric range or cooktop so pots and pans heat consistently for everyday cooking. What it does:

• Supplies controlled heat to one cooktop burner zone
• Helps resolve: burner won't heat, intermittent heating, or very slow heat-up
• Can address uneven heating or visible damage to the element
• Replaces an open/failed element to restore normal cooking performance

What's included:

• 1 surface heating element

Install notes:

• Disconnect power at the breaker and allow the cooktop to cool completely before servicing
• Access the element per your model's service manual; support the cooktop if lifting a glass top
• Note wire locations and transfer connections one at a time to the new element
• Secure the element with existing brackets/clips as designed, then test operation before reassembly

Range not broiling or browning food evenly? A failed broil element is the likely cause. This radiant heating coil restores strong, even heat for searing.

This replacement heating element restores consistent, reliable heat so your appliance reaches and maintains temperature as designed. A worn or open element can lead to long heat-up times or a complete loss of heat. What it does

• Converts electrical energy into heat for proper operation
• Helps the unit reach and hold the set temperature
• Common symptoms of a failed element: no heat, slow to heat, uneven heating, visible cracks/blisters, or tripping the circuit breaker

• 1 heating element

• Disconnect power at the breaker or unplug before servicing; allow the unit to cool completely
• Note wire positions and move connectors one at a time to the new element
• Secure all mounts and ensure terminals are fully seated with no loose connections
• After reassembly, restore power and monitor the first heating cycle

This is a 2500-watt circular heating element located at the rear wall of the oven cavity, surrounding the convection fan. It provides even heat distribution during convection baking and roasting by working in conjunction with the fan. Replace this element if your oven is not heating properly in convection mode, food is cooking unevenly, or the element is visibly damaged or broken.

The Surface Element is an OEM part for Frigidaire electric ranges and cooktops. It is the individual electric coil located beneath the cooktop that provides heat.

The surface element heats up rapidly upon activation in order to boil, simmer or saute foods efficiently. Its precise heating capabilities assist home cooks in meal preparation.

Causes can be mineral deposits caked onto the element surface over time reducing its ability to transfer heat properly. Excess moisture exposure can also damage internal wiring.

Symptoms of a bad surface element include:

• Burners that do not heat up at all or heat unevenly
• Lights flickering below an element when in use
• Popping, buzzing or crackling noises coming from below an element

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Fixes ice buildup in freezer and warm fridge temps. This defrost heater melts frost from the evaporator to restore proper airflow and cooling performance.

Bake element provides the oven's lower heating source so food cooks and browns properly; replacing a faulty element restores normal bake performance and addresses no-heat or uneven baking issues. What it does:

• Heats the oven cavity during bake cycles to deliver even cooking and browning.
• Replacing a failed element can correct no-heat conditions, undercooked food, or uneven baking.
• Visible damage like breaks, blistering, or exposed wires are signs the element needs replacement.
• Electrical symptoms such as a tripped breaker or burning smell can indicate a shorted element.

• Disconnect power at the breaker or unplug the appliance before beginning any repair.
• Allow the oven to cool and remove racks to access the element safely.
• Support the element while removing mounting screws and carefully disconnect terminals; avoid touching terminals with bare hands.
• Restore power and test the oven after installation.

This replacement coil controls the gas valve's opening and holding action during burner operation. Replacing a weak or failed coil restores reliable ignition and steady heat for consistent drying performance. What it does:

• Powers the valve to open during ignition (booster) and keeps it open while heating (holding)
• Helps resolve: igniter glows but no flame, burner lights then shuts off, no heat, intermittent heat/long dry times
• Restores proper gas flow for consistent temperatures
• Direct-fit electrical connection for the valve solenoid

• 1 booster & holding coil

• Disconnect power and shut off gas supply before servicing
• Allow the burner assembly to cool; access the gas valve compartment
• Label and disconnect wires; replace the coil in the same orientation; secure clips/brackets
• Restore gas, check for leaks with an approved solution, then test burner operation

This is a sheath-style heating element mounted at the top of the oven cavity that provides high, direct heat for broiling. It glows red when functioning properly and is responsible for searing and browning food from above. Replace this element if it no longer heats up, heats unevenly, has visible cracks or blistering, or if the broil function stops working entirely.

Fixes frost buildup on evaporator coils and inconsistent cooling. This refrigerator defrost heater melts ice during defrost cycles. 20-minute repair.

Burner not heating or heating unevenly? This 8-inch surface element restores reliable cooktop performance. Simple plug-in installation in minutes.

Oven won't heat or maintain temperature? A failed bake element causes uneven cooking and long preheat times. This lower heating element restores consistent heat.

Frost building up in your refrigerator? This defrost heater and bimetal thermostat kit restores automatic defrost to melt frost and maintain proper cooling.

Fix ice buildup on freezer walls with a new defrost heater. Solves continuous icing and frost accumulation. Moderate DIY repair for most models.

This is a triple radiant surface element used on glass-top electric ranges. It provides heat to the cooktop surface and typically features multiple heating zones for different pot sizes. Replace this element if your cooktop burner is not heating evenly, only partially heating, or not turning on at all.

Fix a burner that won't heat on your glass cooktop. This radiant surface element restores even heating and temperature control. DIY-friendly repair.