Can-Air Reset Button Tripped Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74011665
Replacement dual burner control knob for gas and electric ranges. Attaches to control shaft. Needed when original knob becomes cracked, stripped, or missing.
Do-It-Yourself Stories from Customers like You
Touchpad stopped working Christian T. • Seattle , WA • October 04, 2015
After doing much research online, I found out that the Touchpad on the JennAir downdraft gas range JGS9900BDS is very prone to "breaking." All my neighbors who has this model has reported that the touchpad stopped responding after a few years. Replacing was fairly simple.
1. Turn off the electricity to the range at the breaker
2. Pull the range out by an inch or two
3. On each side of the control panel, remove the screws.
4. Open the oven door and remove the 4 hex screws under the control...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98008321
White thermostat control knob for gas and electric ranges. Replaces worn, cracked, or broken temperature selector knobs. Includes metal insert for secure fit.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10200193
This is a black plastic control knob that fits onto the surface burner valve stem on your range. It allows you to adjust the flame or heat level of the cooktop burner. Replace this knob if it is cracked, broken, or if the printed markings have worn off, making it difficult to set the correct heat level.
Do-It-Yourself Stories from Customers like You
One of the top burner's control valve was seized John J. • Summerville , SC • May 08, 2016
I replaced the burner valve.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10244631
This is a surface burner control knob for electric cooktops. It replaces a worn or broken knob so you can accurately turn the burner switch to the desired heat setting and restore a matched look on the cooktop.
- Attaches to the surface burner (infinite) switch shaft to set heat level
- Helps when a knob is cracked, stripped, loose, hard to turn, or missing
- Restores positive engagement and clear pointer alignment for temperature selection
What's included: One cooktop control knob only. Install notes:
- Disconnect power before servicing
- Pull the old knob straight off the switch shaft; align flat/"D" shape and press the new knob on
- If the knob does not seat, inspect the switch stem for damage or mismatch
- Test each position for smooth rotation and proper detent feel before use
Do-It-Yourself Stories from Customers like You
The left rear switch was shorted and a knob was bad David Q. • Marietta , GA • January 13, 2020
I replaced the switch and the knob using only a screwdriver type handheld multi-tool. My friend had called me on 24 December because his cooktop was tripping the breaker. Since I was out of town and could not get over there, he came over to my house to use my cooktop and all went well. Just before New Year’s Day 2020 I went over and diagnosed the problem. Then over the next couple of days discovered appliance parts pros and ordered the part that was delivered Jan 10. I went over and replaced...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10251384
This plated control knob replaces a worn or missing knob on your range or cooktop, restoring smooth burner adjustment and a matching look. It pushes onto the existing control stem and operates like the original. What it does:
- Mounts on the burner control stem to set and adjust heat levels
- Replaces cracked, stripped, loose, or missing knobs to restore proper control
- Provides clear pointer orientation for consistent settings
- Symptoms it can help with: knob falls off, wobbly/loose feel, hard to turn, won't engage
What's included:
- One plated control knob assembly
Install notes:
- Disconnect power and let the cooking surface cool; if applicable, turn off gas supply.
- Pull the old knob straight off the stem—avoid prying or side pressure that can damage the shaft.
- Align the new knob with the stem and press straight on until fully seated.
- Test the control for smooth operation before regular use.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131859104
Replacement timer knob for washer dryer combos. Mounts to the control timer shaft to select cycles and settings. Needed when original is cracked or stripped.
Do-It-Yourself Stories from Customers like You
Broken control knob Thomas B. • Lewistown , PA • June 20, 2014
Ordered new knob, received it a day later and replaced the defective piece. Working fine, will use AppliancePartsPros.com again. Thanks!
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 316009046
Replaces a cracked, broken, or missing control knob on your range. Attaches to the control shaft for heat and function settings. Restores appearance.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 316220000
Color: white. Measures about 2 inches in diameter.
Do-It-Yourself Stories from Customers like You
One of the stove knobs did not stay on Kay V. • Grand Blanc , MI • March 26, 2016
Purchased a new knob and fixed the problem
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 318602603
Replaces cracked, broken, or missing control knob on your cooktop. Fits onto the control shaft to adjust burner settings. Easy DIY installation.
Do-It-Yourself Stories from Customers like You
Broken burner knob on my stove top Robert G. • New Oxford , PA • March 04, 2021
Replaced the knob. It was very easy to find the correct knob because of the pictures in the catalog,
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 318905202
Replacement control knob for your range. Attaches to the control shaft to operate burners or oven functions. Replace if cracked, broken, or missing.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304507387
White control knob for gas range. Mounts on the control panel to operate burners or oven. Replace if cracked, broken, or missing. Easy installation.
More
Genuine Ge part
By: Ge
Part Number: WB03K10186
Replacement thermostat knob for electric ranges. Restores clear temperature control when original knob is cracked, loose, worn, or missing.
More
Genuine Ge part
By: Ge
Part Number: WB03K10228
Thermostat control knob assembly for your range. Restores manual temperature adjustment. Replace if knob is worn, cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
My oven temp was all off and i could not find this part anywhere else Barbara D. • Cleveland , GA • August 21, 2015
CHECKED ALL THE SMALL COULD BE PROBLEMS FIRST,,,,THEN ORDERED THE KNOB AFTER CHECKING WITH TOO MANY COMPANIES TO LIST....YOU WERE THE ONLY ONE WHO HAD IT
Read more
More
Genuine Ge part
By: Ge
Part Number: WB03K10230
Replace a cracked, stripped, or missing oven thermostat knob. Attaches to the thermostat shaft to restore secure temperature selection.
More
Genuine Ge part
By: Ge
Part Number: WB03T10171
Color: black. Measures about 2 inches in diameter.
Do-It-Yourself Stories from Customers like You
We needed to replace a cooktop knob because the old one had a burn mark on it Corlinda W. • Cypress , TX • October 22, 2014
It was so simple, we placed the order on Fri and it was at our door on Sat. All we needed to do was pull the old knob off and place the new know on. Easy, easy, easy.
The hardest part was making sure to order the right part but even that was easy. In fact, we tried working with GE directly and they were awful! They would not help us without a model number from the cooktop, which we could not get because it was securely mounted down. AppliancePartsPros.com was fantastic since the search process...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB03T10285
Bisque control knob for range surface burner infinite switch. Replaces cracked, stripped, or missing original knobs. Restores heat adjustment function.
More