Circuit Board Parts

Please Note Mounting holes must be tapped using old screws. If the old screws are damaged beyond use order part number WP3400064

This mechanical timer is the cycle controller for your washer. It advances the machine through fill, wash, rinse, and spin at the proper intervals to restore consistent, reliable operation when the original timer fails. What it does

• Sequences the washer through fill, agitate, drain, rinse, and spin steps
• Sends power to the motor, pump, and water valves at the correct times
• Advances automatically based on the selected cycle and knob position
• Common symptoms of a failing timer: won't start, won't advance or stops mid-cycle, runs continuously, or no agitation/spin

• 1 timer assembly

• Disconnect power before servicing
• Lift or remove the control panel; remove the timer knob/dial if required and the timer mounting screws
• Transfer the wire harness to the new timer one connector at a time to maintain orientation; secure the timer
• Reinstall dial/knob, reassemble the console, and test a full cycle

• Designed for 60 Hz applications

This OEM part is a refrigerator dispenser interface. The dispenser interface is responsible for the main functions of the refrigerator, such as adjusting the temperature settings as well as the other functions that are displayed on the interface. If the refrigerator is no longer cooling efficiently, failing to maintain temperature, dispensing water, or the touchpad is unresponsive, the interface might need to be replaced. Thankfully, replacing this part is not a difficult process.To replace the old interface, make sure that all power to the refrigerator is turned off. Open the refrigerator door and remove the door panel of the interior of the refrigerator. Locate the old control board and remove the wire harnesses that connect to it. Take note of the wire connector's orientation and reinsert the wires to the new board. Snap the new interface back in place and reinstall the inner panel. This genuine replacement part is sold individually and is compatible with General Electric, Hotpoint, and RCA brand refrigerators.

This is a Bosch dishwasher control board. The dishwasher's control board ensures that the various cycles and settings can be properly managed, such as the washing and draining cycles. If the user notices issues with dishes not coming out clean after a full cycle, the control board should be checked for error codes or signs of visible wear and tear that may indicate it needs to be replaced. Make sure that the dishwasher is turned off, unplugged, and completely disconnected from its power and water sources. It's recommended that work gloves are worn to prevent injury. This is a genuine OEM part and has been sourced directly from the manufacturer. This is an authentic part and as such is sold individually and made from durable, high-quality, non-corrosive materials to ensure the highest possible quality. This part is compatible with dishwashers that have been manufactured by Bosch, Thermador, Gaggenau, and various other brands.

The Timer is an OEM component specifically designed for Speed Queen commercial washers. It plays a crucial role in controlling wash cycle times and sequences. 

The timer allows for precise regulation of cycle segments to ensure laundered items receive optimal cleaning. It advances operations through the wash, rinse, and spin periods.

Causes of a bad timer can include issues with the electronic circuit board, worn contacts and connections, or faulty input and output switches.

Symptoms of a bad timer include:

• Abnormal cycle lengths that under or over-clean clothes
• The washer fails to advance to subsequent cycles  
• Unexpected stopping or pausing during operation

This OEM Speed Queen replacement part is also compatible with Dexter, Huebsch, Milnor, and IPSO commercial washer models.
 

This electronic oven control board governs the oven's heating functions and provides the digital clock/timer display. Replacing a failed EOC restores accurate temperature control and responsive keypad functions for reliable baking and broiling. What it does:

• Regulates bake, broil, and clean cycles by switching power to the heating circuits based on sensor feedback
• Runs the user interface, including the clock, timer, and status display
• Interprets keypad/overlay inputs and commands the oven relays
• Addresses symptoms like a blank or dim display, unresponsive buttons, oven not starting/heating, erratic temperatures, or an error shown on the display

• 1 electronic oven control board (EOC)

• Disconnect power at the breaker and let the appliance cool before servicing
• Use ESD precautions; handle the board by the edges
• Photograph wiring and transfer connectors one at a time to the new board
• Reuse existing mounting hardware and ensure all ribbon/plug connections are fully seated before restoring power

Due to manufacturer changes harness supplied in kit must be used. On refrigerator models manufactured prior to 2016, the dispenser board may also need to be replaced.

Restore reliable cycle control with this electronic control board. It serves as the dishwasher's brain, coordinating wash, drain, and dry functions so the machine starts, runs, and completes cycles as expected.

• Orchestrates cycle timing and interprets sensor inputs
• Distributes power to components such as the wash motor, drain pump, and water inlet valve
• Communicates with the user interface to execute cycle selections
• Typical failure symptoms include: won't start or power up, cycles won't advance, stops mid-cycle, won't fill or drain, or control-related error codes

• Disconnect power at the breaker and turn off water supply before servicing
• Use ESD protection and handle the board by its edges only
• Access the control area, move wire connectors one at a time to the new board, and secure it in the original mounting
• Restore power and, if available, run the unit's diagnostic/service cycle to verify operation

This electronic control board is the appliance's central controller, directing power and timing to key components. Replacing a failed board can resolve unresponsive controls, cycles that won't start or advance, no display, or recurring error codes.

• Distributes power and manages timing for motors, pumps, fans, heaters, and valves
• Interprets inputs from sensors and switches to execute programmed operations
• Stores and runs the appliance's control logic and settings
• Common failure symptoms: no power/display, won't start, stops mid-cycle, intermittent operation, or error codes

• Disconnect power at the breaker or unplug the appliance before servicing
• Use ESD precautions; handle the board by the edges only
• Photograph wiring and move connectors one at a time to the new board
• Some models require configuration or programming after install—follow the service/tech sheet for your unit

This electronic oven control board manages bake and broil functions, the display, and keypad on gas ranges. Replace a failed board to restore proper heating, accurate temperature control, and a working clock/timer when the original stops responding.

• Regulates oven temperature by reading the sensor and cycling the igniter and gas valve during bake and broil
• Interprets keypad inputs and runs timed cooking modes
• Powers the display, clock, timer, and audible alerts
• Common failure symptoms: oven won't heat or overheats, unresponsive controls, blank or garbled display, or recurring error codes

• Disconnect power at the breaker; shut off gas if working near the gas supply
• Use anti-static precautions and handle the board by its edges
• Photograph wiring and transfer connectors one at a time; secure the control in the original mounting
• Restore power and test bake; perform any required calibration per the manufacturer's instructions

This dryer timer and wiring harness kit restores accurate cycle control when the original timer fails or when a connector update is required. It helps ensure the dryer starts, advances, and shuts off at the correct times.

• Regulates cycle timing and advances the dial through settings
• Directs power to motor and heater circuits at the proper points in the cycle
• Updated harness mates with the revised timer terminals/connectors
• Typical symptoms include: timer not advancing, cycles running too long/short, won't start, or won't shut off

• Disconnect power before servicing; turn off gas supply for gas dryers
• Note wire locations; move wires one at a time; install the adapter harness if your original connector differs
• Mount timer securely; route and secure wiring away from sharp edges, heat, and moving parts
• Run a timed dry test to ensure the timer advances and the dryer shuts off properly

The defrost timer controls your refrigerator's automatic defrost cycle, periodically pausing cooling to power the defrost heater. Replacing a faulty timer restores proper defrosting to help prevent frost buildup, temperature swings, and excessive run time.

• Advances the system between cooling and defrost at set intervals
• Sends power to the defrost heater, then returns the unit to cooling
• Failure may cause heavy frost on evaporator coils and weak airflow
• Fresh food section may run warm while the freezer ices over
• Unit may run constantly, never defrost, or get stuck in defrost

• Disconnect power before servicing
• Location varies by model; access the timer (often in the control housing or rear compartment), note wire positions, and transfer one at a time
• Mount and secure the timer as originally installed; reuse existing bracket/fasteners
• After reassembly, restore power and verify the unit advances through cooling and defrost

This electronic oven control board governs bake/broil functions and the front-panel display in your range. Replace it to restore proper heating control and keypad/display operation when the original control has failed. What it does:

• Interprets keypad inputs and oven sensor feedback to switch bake and broil relays
• Regulates oven temperature during preheat and cycling
• Drives the clock, temperature, and status display
• Common symptoms of a bad board: no heat, blank or erratic display, unresponsive buttons, or recurring error codes

• 1 electronic control board assembly

• Disconnect power at the breaker before servicing
• Handle with ESD precautions; avoid touching exposed circuitry
• Note/photograph wire connections; transfer any brackets and the existing overlay if required
• Inspect wiring, oven sensor, elements, and safety cutoffs; correct issues before restoring power and test-baking

This electronic oven control board governs the cooking functions and display. Replace it to restore accurate temperature control, timer/clock operation, and responsive keypad when the existing board is faulty.

• Regulates bake and broil heating to reach and maintain set temperatures
• Powers and manages the clock, timer, and display readout
• Interprets keypad inputs to start/stop modes and set temps/times
• Failure symptoms: oven won't heat or heats erratically
• Failure symptoms: unresponsive controls, blank/flickering display, or error codes

• Disconnect power at the breaker before servicing
• Handle the board by the edges; avoid static discharge
• Access through the control panel/rear cover; photograph wiring before removal
• Move wires and any mounting hardware one at a time to the new board; reassemble and test

The Relay Board is an OEM part for Frigidaire ranges. It is an electronic component that controls the operation of various range functions and components by directing electrical currents through a network of relays.

Causes of a bad relay board include failure of electronic components over time due to continuous use, component fatigue, water damage, or surges/spikes in electrical current.

Symptoms of a bad range relay board include:

• Inoperable or unreliable oven/range functions such as bake, broil, warm, etc.
• Issues with cooktop burner ignition or flame level control
• Inconsistent or inaccurate temperature readings
• Error codes or diagnostic trouble codes appearing

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The PC Board is an OEM part for Frigidaire refrigerators. It serves as the control center of your refrigerator, allowing you to adjust settings, monitor temperatures, and access various functions.

A bad PC board can be caused by electrical issues, component failure, or damage. When the user interface and display board become faulty, it can result in issues such as unresponsive controls, inaccurate temperature readings, or a blank display.

Symptoms of a bad PC include:

• Unresponsive buttons or controls on the refrigerator
• Inaccurate temperature readings or inconsistent display
• Blank or flickering display

Replace your faulty PC board with this genuine OEM Frigidaire part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.