Compressor Start Relay Overload Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10268397
This main wire harness routes power and control signals between the appliance's control board and components to restore electrical connectivity and reliable operation. Replacing a damaged harness helps eliminate intermittent faults and lost functions. What it does:
- Provides the primary electrical connections between the control board and motors, switches, sensors and valves
- Carries power and signal wiring so controls and components operate as intended
- Commonly replaces harnesses with broken, melted, or corroded wires or connectors
- Can resolve symptoms such as no power to components, intermittent operation, or unresponsive controls
What's included: One main wire harness Install notes:
- Disconnect power to the appliance before inspecting or replacing the harness
- Compare connector types and routing to the original harness; install in the same path to avoid chafing
- Secure connectors fully until they click; avoid pulling on individual wires
- If wiring or connectors show heat damage or corrosion beyond the harness, inspect associated components.
Do-It-Yourself Stories from Customers like You
Cook top spark igniter circuit shorted out blew circuit breaker Cynthia R. • St. Louis , MO • June 18, 2017
Installed new igniter wire harness
Read more
More
$115.63
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 318531500
Burner won't heat or stays on high? This cooktop infinite switch controls element temperature settings. Moderate DIY repair taking 30-45 minutes.
More
$93.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Lg part
By: Lg
Part Number: 6749C-0013B
Fix inconsistent cooling or defrost issues with this thermistor assembly. Senses temperature to regulate cooling cycles. Common repair for refrigerators.
Do-It-Yourself Stories from Customers like You
Wine refrigerator shut down Michael L. • Chico , CA • July 08, 2020
Agent was very helpful in diagnosing the problem and finding the correct part for LG wine fridge which was 15 years old. Gave instructions on how to replace part and part was delivered the next day. Customer service doesn't get any better than this.
Read more
More
$27.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W11561436
Fix cooktop electrical failures or unresponsive controls with this wire harness. Restores power and signal connections between components.
More
$42.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WB23X33
Range burner not heating or stuck on high? This infinite switch controls power flow to surface elements. Direct replacement restores proper heat control.
Do-It-Yourself Stories from Customers like You
Burner switch not working Darral B. • Gretna , LA • April 16, 2021
Went to nearby appliance parts store and was told switch was no longer available. Range was too old, (range was built in early 70s). Went online and found your company. Gave switch part number and within 5 minutes had it ordered and shipped to me. When it arrived I replaced the old switch with the new switch and burner is working again. Thanks for your help.
Read more
More
$160.31
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WB24K5022
Oven light switch.
Do-It-Yourself Stories from Customers like You
Rocker switch failed in the "on" position had to get a ge part for a magic chef oven John B. • Seabrook , TX • January 25, 2016
Slid the oven out. Opened the control panel. Shut the power off. Replaced the switch. reversed the steps.
Read more
More
$38.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WB24X10172
This micro switch is a small electromechanical door/control switch that restores reliable on/off signaling for your appliance. Replacing a failed switch helps restore normal operation and safety interlocks. What it does:
- Opens or closes an electrical circuit when actuated, enabling controls or motors to run
- Commonly used in door and safety interlock applications to prevent operation when open
- Can stop intermittent power or control-response problems caused by a worn switch
- Helps resolve symptoms like appliance not starting, controls not responding, or cycling unexpectedly
What's included:
Install notes:
- Disconnect power (unplug appliance or flip the breaker) before servicing
- Observe sharp edges and wear protective gloves; remove access panels as needed
- Verify correct switch orientation and actuator engagement before reassembly
- Test continuity with a multimeter after installation to ensure proper operation
More
$11.26
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 134996900
This pressure switch monitors the water level inside the washer tub and signals the control board when the correct fill level has been reached. It connects to a small air hose that runs to the tub. Replace this switch if your washer overfills, underfills, does not fill at all, or fails to advance past the fill cycle.
Do-It-Yourself Stories from Customers like You
Agitator was turning on while filling with water Richard M. • Coffeyville , KS • August 21, 2015
Put in water level switch
Read more
More
$89.55
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 216894200
Freezer won't cool or makes clicking/humming sounds? This compressor start relay restores reliable motor startup. Simple DIY fix in under 30 minutes.
More
$29.49
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293814
Do-It-Yourself Stories from Customers like You
Electric burner functioning erratically. Mitchell B. • Silver City , NM • November 18, 2023
Replaced the infinite control switch,
Read more
More
$68.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304511982
Refrigerator not cooling or compressor won't start? This compressor kit with electrical components restores cooling. Requires HVAC certification.
More
$386.52
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: W10309995
Refrigerator not cooling or freezing? This compressor powers your cooling system. Professional installation recommended due to sealed system work.
More
$386.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WH12X10511
Fix a washer that won't fill properly, overfills, or stops mid-cycle. This pressure switch restores proper water level detection. Simple 10-minute repair.
Do-It-Yourself Stories from Customers like You
Washer would not fill to the proper level sometimes it would fill agitate a few times turn the pump on and drain a little then fill again sometimes it would pause or a cycle might take all day Andrew K. • Eaton , OH • February 10, 2015
I replaced the water lever/electric pressure switch. Immediately the washer ran like a new machine. No problems pausing or stopping to add water and draining as before. This repair is very simple and takes less than 10 min. All you have to do is remove two phillips screws on the panel just below all the controls. Once removed the pressure switch is on the left side with a clear rubber tube attached with a spring clip. Simply squeeze the clip together with some pliers and slide it down then...
Read more
More
$54.61
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4157180
If your range burner won't spark or ignite when you turn the knob, this burner igniter switch restores spark delivery for reliable lighting.
Do-It-Yourself Stories from Customers like You
No spark at burners Brandon C. • Brooklyn , NY • January 14, 2017
I installed two burner ignitions under the knobs then installed a new spark module, which I had to order from a different vendor as this is a 20+ year old Caloric stove. Fortunately this spark module is used in many other appliances.
Read more
More
$59.48
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74007753
This is a spark ignition switch used on gas ranges and cooktops to detect burner position and activate the igniter when the knob is turned. It sends a signal to the spark module to generate the electric spark that lights the gas burner. Replace this switch if a burner fails to spark when turned on, sparks continuously even after the flame is lit, or if the igniter clicks but won't stop.
Do-It-Yourself Stories from Customers like You
When turning the burner off the ignitor would continue to spark and some burners would not ignite. Andrew M. • Valley City , OH • June 02, 2020
I replaced the burner switches, since we had been having trouble with specific burners igniting unless another burner was tuned on. Then I replaced the spark module since the flame and the burner being turned off were not being detected and burners would not re-light if the flame went out.
Read more
More
$66.78
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9756824
This wire harness connects the control/switch assembly to the appliance's thermal cutoff and control circuits, restoring reliable electrical connections for proper operation. It's a direct-fit replacement when the original wiring is damaged or corroded. What it does:
- Provides the factory routing and connectors between the control/switch and TCB/thermal cutoff
- Re-establishes lost or intermittent power caused by damaged wiring or broken terminals
- Helps stop failures that cause controls to be unresponsive or cycles to stop unexpectedly
- Uses OEM-style terminals and insulation to match original fit and function
What's included:
- One wire harness (switch TCB) as shown
Install notes:
- Disconnect power before starting — verify the appliance is completely de-energized
- Take photos of existing wire routing and connector locations to ensure correct reassembly
- Plug connectors fully and secure the harness along original clips or tie points; avoid sharp edges
- If terminals are damaged at mating parts, inspect and replace those components rather than splicing connectors
Do-It-Yourself Stories from Customers like You
Gas range one burner stopped lighting when turned on James C. • Franklinton , NC • September 17, 2016
I researched similar problems online, especially youtube. The ignition harness seemed to be the problem. I ordered it here, and received it within 2 days. Maybe I was lucky, but It took only about 15 minutes to replace on my unit. Stove is back to working as expected.
Read more
More
$104.34
IN STOCK
Most orders arrive by Wednesday, November 25