Igniter Bake Parts

This 24" bake element heats the oven cavity to cook and brown food. Replace a damaged or broken element to restore even baking and proper oven heat for reliable cooking results. What it does:

• Heats the oven's lower cavity to provide the radiant heat used for baking and roasting
• Replaces cracked, burned-through, or non-heating elements that prevent the oven from reaching temperature
• Helps restore consistent baking and browning when the original element fails
• Works with the oven's control system to deliver heat when a bake cycle is selected

• Disconnect power to the appliance before beginning any repair to avoid shock hazard
• Remove oven access panels and wire connectors carefully; note terminal locations before disconnecting
• Use appropriate fasteners and gaskets as required by your oven; do not force or bend terminals

This broil burner ignitor lights the oven broil burner so the broiler can heat reliably for browning and broiling. It provides a direct replacement for a failed or cracked ignitor to restore broil operation. What it does

• Heats and glows to ignite the oven broil burner safely
• Commonly replaces an ignitor that won't glow or won't light the broil flame
• Helps stop intermittent broil operation or a broiler that won't start
• Direct-fit replacement when the original ignitor is damaged or worn

• One broil burner ignitor

• Disconnect power and shut off gas supply before starting any repair
• Handle the ceramic/glass element carefully—it's fragile and can break if dropped or flexed
• Basic hand tools are usually required; follow manufacturer instructions for proper wiring and mounting

The Ignitor is an OEM part for Frigidaire dryers. It is responsible for providing the necessary heat to ignite the gas, allowing the dryer to produce the necessary heat for drying your clothes.

A bad dryer ignitor can be caused by wear and tear over time, damage from mishandling, or electrical issues. Signs of a faulty ignitor include the dryer not heating up, taking longer to dry clothes, or not starting at all.

Symptoms of a bad dryer ignitor include:

• The dryer not heating 
• Clothes taking longer to dry than usual
• The dryer not starting or responding 

Replace your worn-out or damaged dryer ignitor with this genuine OEM Frigidaire part to restore your dryer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This round cooktop surface element provides a direct heat source for electric ranges, restoring one burner's ability to heat cookware evenly. It's a straightforward replacement for a damaged or non-heating burner element. What it does:

• Heats cookware on an electric range cooktop so pots and pans can reach cooking temperatures
• Replaces a cracked, burned-through, or non-functioning surface element to restore burner operation
• Helps eliminate intermittent or no-heat symptoms on the affected burner
• Works with the range's existing terminal block and controls when compatible

• One cooktop surface (round) element

• Disconnect power to the range at the circuit breaker before starting work
• Remove the damaged element from its terminal connections and lift out; install the new element by seating terminals fully and testing power
• Use care to avoid scratching the cooktop surface and verify element compatibility with your model

The Surface Igniter is an OEM replacement part for Whirlpool ranges. It is responsible for igniting the gas in the burner

A bad surface igniter can occur due to normal wear and tear, electrical malfunctions, or damage caused by food spills or grease buildup. If you experience issues such as the burner not igniting, weak or inconsistent flame, or a clicking sound without ignition, it may indicate a problem with the surface igniter.

Symptoms of a bad surface igniter include:

• Burner not lighting or taking a long time to ignite
• Weak or inconsistent flame
• Continuous clicking sound without ignition

Replace your faulty surface igniter with this genuine OEM Whirlpool part to restore your gas burner. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This replacement igniter knob kit restores the ignition control and user knob for gas range burners, letting you safely operate the burner and re-establish reliable spark control. Designed as a direct-replacement style kit. What it does:

• Replaces the burner igniter control and the user knob assembly used to ignite and adjust a gas burner.
• Helps resolve symptoms such as inability to ignite a burner, intermittent or weak spark, or a loose/missing control knob.
• Restores proper knob feel and control indexing for accurate burner selection.
• Matches OEM form and function for straightforward replacement when the existing knob/igniter assembly is damaged.

• Disconnect power and turn off gas supply before starting any service; follow gas-safety precautions.
• Basic hand tools required; do not force parts—align components before tightening.
• Inspect surrounding components (switch, electrode, wiring) for damage while installing.

This heating element kit replaces a failed heating element to restore normal heating in compatible laundry or cooking appliances. It provides the core heating component needed to get your appliance producing heat again. What it does:

• Replaces a damaged or burned-out heating element that stops the appliance from heating
• Helps resolve symptoms like no heat, weak or inconsistent heating, or tripped thermal cutouts
• Restores the appliance's ability to reach and maintain operating temperatures for normal cycles
• Works as the direct replacement heating component shown in OEM parts listings

• One heating element kit as shown

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock risk
• Handle the element and terminals carefully to avoid bending or damaging mounting tabs
• Confirm correct terminal connections and secure mounting per the appliance wiring diagram

This tubular bake element is the lower heating element for electric ovens, restoring oven bake heat and even cooking performance. It replaces a damaged or non-heating element to get your oven back to regular baking temperature. What it does:

• Produces the primary radiant heat from the bottom of the oven for baking and roasting
• Common symptom: oven won't reach or hold set bake temperature
• Common symptom: visible breaks, blistering, or arcing on the element surface
• Common symptom: uneven baking or loss of heat from the bottom of the cavity

• One bake (lower) element

• Disconnect power at the breaker or unplug the range before any work
• Access typically requires removing the oven floor or lower access panel and unscrewing the element terminals
• Inspect wiring and terminal connections for heat damage; replace or repair as needed

This oven bake element is the lower heating element that provides consistent radiant heat for baking and roasting. It restores the oven's ability to reach and hold baking temperatures for even cooking results. What it does:

• Heats the oven cavity from the bottom for baking and roasting
• Replaces a broken or visibly damaged element that won't heat or glow
• Helps correct uneven baking or failure to reach set temperatures
• Works with the oven's thermostat and controls to maintain cooking heat

• One lower/bake oven element

• Disconnect power to the range or oven at the breaker before servicing
• Access may require removing the oven floor or rear access panel; handle terminals carefully
• Inspect terminal connections and mounting hardware; tighten or replace as needed

This bake element is the oven heating element that produces the lower radiant heat used for baking and roasting, restoring even oven temperatures and consistent cooking results. What it does:

• Heats the oven cavity during bake cycles to cook food evenly
• Replaces a broken or visibly damaged element that won't glow or heats weakly
• Helps correct symptoms like no heat on bake, uneven baking, or error codes tied to heating failures
• Works as the direct replacement heating element assembly in compatible ranges and wall ovens

• One bake element

• Disconnect power to the appliance before starting any repair
• Allow the oven to cool completely and wear gloves to avoid cuts from sharp edges
• Access typically requires removing the oven cavity or rear access panel and disconnecting two terminal connectors
• Verify correct fit and secure electrical connections;

This boiler is the dishwasher water-heating assembly that provides the hot wash and rinse temperatures needed for effective cleaning. Replaces a failed boiler to restore normal heating during dishwasher cycles. What it does:

• Heats water used during wash and rinse cycles so detergent can clean effectively
• Helps maintain proper cycle temperatures for sanitizing performance
• Stops working when the element fails or the boiler leaks or overheats
• Often linked to no-heat cycles, prolonged wash times, or error codes related to water temperature

• Disconnect power and water supply before starting any repairs
• Inspect for leaks and damaged connectors; replace any worn mounting hardware or seals
• Handle electrical connections carefully and follow the appliance's service manual for wiring and testing

• Genuine OEM Part: Produced by Whirlpool for unmatched compatibility and reliability with Maytag and Magic Chef appliances.
• Spade Style Connections: Features secure spade terminals for easy electrical connections.
• Exact Fit: Sized at 16x16 inches with 2-inch deep terminals for a perfect fit in specific models.

Common Symptoms for Maytag Magic Chef Oven Bake Element WP7406P012-60:

• Oven not heating evenly or not heating at all
• Visible damage or breakage in the element
• Oven taking longer than usual to preheat
• Inconsistent baking results

Basic Troubleshooting for Maytag Magic Chef Oven Bake Element WP7406P012-60:

• Check for Visual Damage: Inspect the bake element for any signs of wear or damage. Look for blisters, breaks, or areas that might be discolored (typically a burnt orange or darker spots).
• Test for Continuity: Using a multimeter, test the element for continuity. A lack of continuity indicates that the element is faulty and needs replacement.

Installation Instructions for Maytag Magic Chef Oven Bake Element WP7406P012-60:

1. Ensure Safety: Disconnect power to the oven by unplugging it or turning off the circuit breaker.
2. Access and Remove the Old Element: Remove the oven racks for better access, unscrew the mounts, and gently pull the element forward to reach the terminals.
3. Disconnect and Replace: Detach the spade connectors from the old element and connect them to the new one. Secure the new element in place with the original screws.
4. Operational Test: After installation, reconnect power and briefly turn on the oven to ensure the new element functions correctly.

This heating element warms the appliance's wash/dry cycle to help heat water and support drying for better cleaning results. It replaces a failed or weakened heater to restore normal heating performance. What it does:

• Heats water and supports drying during wash cycles.
• Restores lost heating when the appliance no longer reaches proper wash or dry temperatures.
• Can correct symptoms such as poor cleaning, incomplete drying, or heater-related error codes.
• Works as the main heater assembly responsible for thermal functions in the tub.

• Disconnect power and water before starting any repair.
• Access may require removing lower panels or the tub assembly; follow service instructions.
• Handle carefully to avoid bending terminals or damaging mounting points.
• Test the new element for continuity and correct installation before reassembling the appliance.

The Range Oven Hot Surface Igniter Assembly is an essential component for maintaining the performance of your Samsung range. This genuine OEM part ensures reliable ignition, allowing your oven to heat efficiently and consistently every time you cook. Designed specifically for Samsung range models, it guarantees a perfect fit and seamless integration with your appliance. The hot surface igniter plays a crucial role in igniting the gas, providing steady and controlled heat for baking, roasting, and other cooking needs. Replacing a faulty igniter with this high-quality assembly can restore your ovenGÇÖs functionality, preventing delays and ensuring safe operation. Easy to install, the Range Oven Hot Surface Igniter Assembly offers a durable solution to keep your kitchen running smoothly. Trust in this genuine OEM part to deliver dependable performance and enhance your cooking experience with your Samsung range.