Object Stack Blower Wheel Parts

Fixes uneven cooling or warm top shelves in freezers. This blower wheel restores proper air circulation when the fan stops moving cold air effectively.

This control cooling fan assembly circulates air through the oven's control compartment to remove heat. By keeping the console and electronics cool during and after cooking, it helps prevent overheating and protects sensitive components.

• Moves air across the control area to dissipate heat from the board, wiring, and trim
• Runs during/after bake or broil to maintain safe cabinet temperatures
• Typical failure signs: fan doesn't run, loud vibration/squeal, control area feels very hot, or heat-related shutdowns
• Purpose-built for the control compartment; distinct from the convection fan inside the oven cavity

• Disconnect power at the breaker and allow the appliance to cool; wear cut-resistant gloves
• Access is typically from the rear or top; remove panels/guards per your model's service information
• Transfer any required brackets or ducts; secure so the wheel spins freely with no rubbing
• Reconnect wiring as originally routed, keeping harnesses clear of the blade; test operation before reassembly

Freezer not cooling evenly or warm spots in fridge? A cracked evaporator fan blade stops airflow across coils. Simple DIY fix restores proper cooling.

Turntable not rotating or making rumbling noise? This drive motor restores smooth rotation. DIY-friendly repair—remove 5-6 screws from bottom panel.

Turntable not rotating or making noise? This microwave motor drives smooth turntable rotation. Common fix when the plate stops turning or pauses.

Threads into the refrigerator base to level and stabilize the cabinet on uneven floors. Replace if broken, stripped, or missing to ensure proper alignment.

This is a blower wheel designed for use in a range vent hood. It attaches to the motor shaft and spins to pull air, smoke, and grease-laden vapors up through the hood and out the vent. Replace this part if your vent hood has weak airflow, makes rattling or scraping noises, or the fan vibrates excessively during operation.

Microwave tray not rotating? This turntable motor spins the glass tray for even heating. Fixes tray rotation issues and reduces cold spots in food.

Shaft that the idler pulley rotates on in your dryer. Replace if worn, wobbling, or causing squealing. Helps maintain proper belt tension and alignment.

Fix squealing noises or convection that shuts down after preheating. This oven fan motor circulates air for even baking and roasting. Common DIY repair.

This is a small synchronous motor that drives the turntable inside the microwave, slowly rotating the glass tray to ensure even heating of food. It mounts beneath the microwave floor and connects to the turntable coupler. Replace this motor if the turntable has stopped spinning or rotates intermittently while the microwave is running.

Instruction sheet included.

Adjustable leveling foot that supports and levels your refrigerator. Replace worn, cracked, or missing legs to stop rocking and improve stability.

This is a fan blade designed for the condenser section of a room air conditioner. It mounts on the condenser fan motor shaft and draws air across the condenser coils to dissipate heat from the refrigerant. Replace this blade if it is cracked, warped, or missing fins, which can cause the unit to run loudly, overheat, or fail to cool properly.

Front caster assembly that mounts to the bottom of your refrigerator. Replace if cracked, broken, or worn to restore smooth rolling and stability.

Oven overheating or running loud? This cooling fan motor assembly circulates air to prevent overheating and reduce noise. Direct-fit replacement part.