Run Vent Push Button Switch Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293830
If your range burner won't turn on or off properly, or the indicator light stays on when turned off, this infinite switch restores control. DIY repair.
Do-It-Yourself Stories from Customers like You
Burner control bad, could not tell if it was on the number Chalmer M. • Tipp City , OH • January 21, 2022
Remove front panel and replaced. Received parts fast.
Read more
More
$72.73
- Compare At:
-
$87.28
- You Save:
-
$14.55
Genuine Lg part
By: Lg
Part Number: ABH74499601
This is the button or lever assembly mounted on the front panel of the refrigerator dispenser. It activates the water or ice dispenser when pressed. Replace this assembly if the dispenser button is cracked, sticking, unresponsive, or if the dispenser no longer activates when the lever is pushed.
Do-It-Yourself Stories from Customers like You
Broken ice dispenser button Thomas R. • Glen Burnie , MD • September 09, 2019
Replaced it. Ordered the dispenser cover because the repair guy said they usually break the plastic tabs removing the cover. I didn't and reused the old one. Just need to be careful removing the old one. Cover just pries off. Simple to replace.
Read more
More
$51.21
- Compare At:
-
$60.43
- You Save:
-
$9.22
Genuine Ge part
By: Ge
Part Number: WB03T10076
White.
Do-It-Yourself Stories from Customers like You
Had o replace baking element an two knobs Barbara M. • Lake Wales , FL • April 18, 2016
My husband put in new parts
Read more
More
$12.95
- Compare At:
-
$58.35
- You Save:
-
$45.40
Genuine Ge part
By: Ge
Part Number: WB03T10295
Replace your broken, cracked, or paint-worn range gas valve knob. This control knob attaches to the valve stem and allows you to adjust burner flame.
Do-It-Yourself Stories from Customers like You
Knobs on gas range broke, made cheap not metal Thomas G. • Manahawkin , NJ • February 21, 2018
Had to order new ones.
Read more
More
$43.57
- Compare At:
-
$51.85
- You Save:
-
$8.28
Genuine Bosch part
By: Bosch
Part Number: 00611653
Replace your dishwasher's start button if the original is cracked, loose, or missing. This control panel button cap restores the proper feel and look.
Do-It-Yourself Stories from Customers like You
No problem just converted from white to black Laura T. • Conway , SC • October 31, 2017
AppliancePartsPros. knew EXACTLY what I needed (based on Model & Serial #) right down to the screws!! I was any easy 1 hour job (even with one arm....other one is in a cast).... THANK you! Thank you! Thank you!!
Read more
More
$6.42
- Compare At:
-
$7.64
- You Save:
-
$1.22
Genuine Frigidaire part
By: Frigidaire
Part Number: 316219004
Fix burners that won't spark or click constantly. This igniter switch wiring harness restores reliable lighting on gas ranges. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
One of my stove burners would not spark. Mike M. • Bound Brook , NJ • October 26, 2023
I replaced the switch/wire harness that connects to the gas valves.
Read more
More
$113.95
- Compare At:
-
$135.60
- You Save:
-
$21.65
Genuine Frigidaire part
By: Frigidaire
Part Number: 316238202
The Dual Element Surface Switch is an OEM part for Frigidaire electric ranges and cooktops. It governs power distribution to the dual element.
Causes may be loose electrical terminals within the switch, defects from past power surges, or general wear over extended use.
Symptoms of a bad surface switch include:
- Inability to toggle one or both elements independently
- Elements activating intermittently or staying stuck on
- Overheating, sparks or strange sounds from faulty connections
- Repeated burning or singeing of cookware bottoms
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Both large burners were starting to go to higher heats at lower settings. James T. • Hilo , HI • April 23, 2023
I replaced both the large single element and the large dual element control switches. It appears the resistors were burning out. Problem seems to be fixed. Will know later when I do some simmering.
Read more
More
$85.95
- Compare At:
-
$102.28
- You Save:
-
$16.33
Genuine Whirlpool part
By: Whirlpool
Part Number: W10915061
Control knob for electric range surface element temperature selection. Replaces worn, cracked, or broken knobs. Installs on control panel.
More
$55.30
- Compare At:
-
$65.81
- You Save:
-
$10.51
Genuine Ge part
By: Ge
Part Number: WB03K10216
Replacement control knob for gas range valve stem. Installs on burner or oven controls. Needed when original knob is broken, cracked, or missing.
Do-It-Yourself Stories from Customers like You
Missing stove knob Karin B. • Encino , CA • May 04, 2014
The knob we purchased worked.. we also found out what happened to the other one. fell into the oven and melted... turned on oven today and smoke was pouring out of oven.. it had melted a little, but no one saw it...
Read more
More
$12.95
- Compare At:
-
$15.28
- You Save:
-
$2.33
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3364293
Replacement timer knob for washers. Installs on the control panel to operate the timer dial. Order if your original knob is cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
The plast timer knob on my whirlpool washer just got old broke and fell off Ellen W. • Richmond , IN • November 29, 2014
I ordered a new timer knob from Appliance Parts. The knob came, and I went to my washer and screwed it on. That took about 35 seconds. Everything is fine now!
Read more
More
$52.68
- Compare At:
-
$63.22
- You Save:
-
$10.54
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8054980
This lid switch is the washer's safety interlock. It detects when the lid is closed so the machine can agitate and spin, and cuts power when the lid is opened to stop operation and enhance user safety.
- Monitors lid position and allows agitation/spin only when the lid is closed
- Interrupts motor operation if the lid opens during a cycle
- Common failure symptoms: washer won't start or spin, fills but stalls, stops intermittently, or displays "lid open" alerts
- Restores proper cycle progression and safety shutoff when replaced
What's included: One lid switch Install notes:
- Disconnect power and water supply before servicing
- Access the switch from under the top panel/console per your model's procedure
- Release the old switch, move the harness to the new switch, and secure wiring away from moving parts
- Ensure the lid closes and actuates the switch before reassembly and test run
Do-It-Yourself Stories from Customers like You
Direct drive motor coupling failed wouldn't agitate or spin Tim H. • Fort Collins , CO • October 18, 2014
Was set to pull the trigger on a new washer since this one was 10+ years old. Broke a $25 lid switch fumbling to get the washer open before I found the appliancepros video library. Once I got things apart the right way I was able to diagnose the problem in 5 minutes. Identified the $10 part needed. Got the $10 coupling and the $25 switch and had the washer working like new in 20 minutes. I'm pretty proud of myself.. not going to tell anyone about the $25 switch.
Read more
More
$115.49
- Compare At:
-
$137.43
- You Save:
-
$21.94
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10483313
White control knob for gas range burners and oven controls. Replaces missing, cracked, or broken knobs. Installs on control panel to restore functionality.
Do-It-Yourself Stories from Customers like You
Missing a knob Judy B. • Wheaton , IL • March 21, 2019
Ordered the knob and put it on ..works just fine
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304508926
Burner won't turn off or element light stays on? This range burner control switch regulates temperature and power. Moderate DIY repair, 30-60 minutes.
Do-It-Yourself Stories from Customers like You
The control knob was orginal equipment but the switch installed by a sears tech was not and the knob eventually would not work the switch Kevin W. • Yucca Valley , CA • December 19, 2016
I went on your website found the parts needed to make the repairs. I watched the short video on installation. The parts arrived just a few days after I placed the order. I finished the repair in less than an hour and had to wait a few minutes to test the switch since the power was off and on due to a wind storm. Simple easy to do repair and I saved $90.00 on service fee for a tech to do the repair.
Read more
More
$64.70
- Compare At:
-
$76.99
- You Save:
-
$12.29
Genuine Whirlpool part
By: Whirlpool
Part Number: W10470674
Side or bottom exhaust vent kit for dryers. Relocates dryer vent from rear to side or bottom position. Includes metal duct, hardware, and instructions.
Do-It-Yourself Stories from Customers like You
Needed to switch dryer to side exhaust Allen B. • Clarksville , IA • January 23, 2015
Went on line looking on how to accomplish this and Appliance parts pro site came up and it was exactly what I needed. Order was sent on Sunday note and on Tuesday afternoon it was delivered.
Just got done installing. Took longer to gather up the needed tools then to install. The instructions were awesome . complete wife great photos
Read more
More
$71.95
- Compare At:
-
$85.62
- You Save:
-
$13.67
Genuine Whirlpool part
By: Whirlpool
Part Number: W10854242
Rubber grommet cushions control knobs and seals the valve area on gas cooktops. Replace when cracked, broken, or worn to prevent spills from entering valve.
Do-It-Yourself Stories from Customers like You
All the grommets under the knobs were broken due to usage and probably the heat from the burners. Stanley F. • Elk Grove , CA • May 08, 2020
Replaced all the grommets with the new ones that were purchased.
Read more
More
$9.63
- Compare At:
-
$11.56
- You Save:
-
$1.93
Genuine Ge part
By: Ge
Part Number: WB06X10436
Controls exhaust airflow in over-the-range microwaves. Replaces bent, damaged, or missing damper assemblies for proper external venting installation.
Do-It-Yourself Stories from Customers like You
Convert microwave from recycling vent to an external vent system Gaspar D. • Summerfield , NC • December 31, 2015
We followed the manufacturer's instructions about re-positioning the fan motor and installing the vent damper (easy). We constructed a duct system from the microwave to the outside of the house (challenging). We used 3.25" x 10" metal duct to start the system through the wall behind the microwave, where we added framing to reinforce a cut stud. We ran the duct up a closet wall and through its ceiling into the attic. We had to make an offset duct piece from 3.25" x 10" metal duct to clear a...
Read more
More
$39.95
- Compare At:
-
$47.54
- You Save:
-
$7.59