Super Egg Small Engine Ignition Coil Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP77001099
Broil element not heating? This upper heating element restores high-heat broiling and even browning. Straightforward DIY fix takes under 30 minutes.
This part fixes the following symptoms
-
Element will not heat
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
Broil element went out Markel P. • Poplar Bluff , MO • February 21, 2016
Replaced element. Good experience. Prompt service. Thx appliance parts pros.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY07409600
Oven won't heat or bakes unevenly? This lower bake element restores proper heating for baking and roasting. Easy DIY repair—unplug, swap out, done.
This part fixes the following symptoms
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
My Bottom Heating Element burned out Laurie P. • Antigo , WI • March 23, 2014
Unplugged the stove, removed the burned out heating element, and put in the new part. Plugged the stove back in and turned on the oven to be sure it heated and it did.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 240356220
Fix frost buildup in your freezer with this refrigerator defrost heater. Prevents ice accumulation on evaporator coils. Moderate DIY repair project.
More
Genuine Ge part
By: Ge
Part Number: WB44T10056
Fix uneven baking and undercooked centers by replacing your failed lower bake element. Restores consistent bottom heat for proper oven performance.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2000631
Fixes frost buildup and poor cooling caused by a failed defrost heater. This evaporator heater melts ice from coils to restore efficient operation.
Do-It-Yourself Stories from Customers like You
Defrost heater. Larry A. • Spring Valley , OH • July 13, 2018
I replaced the defrost heater element and the thermostat. There was nothing wrong with the thermostat, but I decided to replace it due to the age and location ( next to the defrost heater).
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP60106-34
Fix frost buildup in your freezer with this defrost heater. Restores proper cooling when ice accumulates on evaporator coils. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
The ice was building up on both ide of the shelf seperating the refrigerator and freezer section Raman P. • West Chester , PA • December 25, 2015
Replaced the heater coil and the Thermostat underneath the freezer floor.
1. Unplug the Power, allow the ice build-up to thaw (Use hair-dryer).
2. Remove the heavy duty Plastic Tray (Freezer Floor) very carefully (the left and right side lips of the tray are snapped behind the sides of the freezer frame, un-snap the lips using flat spatula) . Gently pull out the Tray
3 Remove the plastic shroud (cold air diverter) at the back of freezer section (after removing the screw, tuck-up the shroud to...
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DA47-00200C
Fix refrigerator icing up or water leaking from door. This water tank heater prevents freezing in the tank. Test with multimeter for continuity.
Do-It-Yourself Stories from Customers like You
The refrigerator side was icing up and then water would run out from the door Jeffrey M. • Edmond , OK • October 18, 2014
Getting to the drain heater really wasn't so bad. The problem was waiting for the ice to defrost so that I could remove the back panel.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP61006198
Fix frost buildup on evaporator coils with this defrost heater and thermostat assembly. Restores normal cooling by completing defrost cycles properly.
Do-It-Yourself Stories from Customers like You
Wasn't defrosting Chris B. • Cherry Hill , NJ • June 22, 2015
I replaced the thermostat, defroster, and defrost control board.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR51X10111
Fix frost buildup and temperature fluctuations in your refrigerator. This defrost heater melts ice from evaporator coils during the defrost cycle. Moderate DIY.
More
Genuine Ge part
By: Ge
Part Number: WR51X10138
This thaw heater is the evaporator defrost heating element that melts frost during the refrigerator's defrost cycle. Replacing a failed heater helps restore normal defrosting and reduce frost buildup that can restrict cooling. What it does:
- Heats the evaporator coil during the defrost cycle to melt accumulated ice
- Prevents excessive frost buildup that can block airflow and reduce cooling efficiency
- Common symptoms of a failing heater: heavy frost or ice on the evaporator/back wall, reduced cooling, or long compressor run times
- Works as part of the appliance's defrost system alongside the defrost thermostat and control
What's included: One thaw heater Install notes:
- Disconnect power to the appliance before starting any repair
- Access typically requires removing interior panels and the evaporator cover; handle the evaporator and wiring carefully
- Inspect associated defrost components (thermostat, timer/control) if problems persist; replace only parts confirmed faulty
Do-It-Yourself Stories from Customers like You
The fan in the lower draw was not working Michael K. • Trinity , FL • February 16, 2025
I replaced the fan and heater element. The replacement was not an exact match. I had to adjust the parts to get the harness to fit the plug was not the correct size. I cut it off and used the existing plug. Not a big deal and everything else fit. Pretty good for a twenty year old replacement. Also the heater element was a different shape but it fit as is.
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00484782
The Surface Element is an OEM part for Bosch cooktop and ranges. Measuring 6 inches across, it provides focused heat from below for smaller sized cookware.
Causes of a bad 6" plug-in element generally relate to normal wear and tear over time. Spills left on the coils could potentially cause issues by corroding internal wiring or damaging heating components.
Symptoms of a bad narrow surface element can include:
- The element heating intermittently or not at all
- Only parts of the coil visibly heating up
- Buzzing or clicking coming from below the element
- Tripped circuit breakers affecting that specific element
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Element not heating. Jim S. • Covington , WA • February 24, 2019
Unpack. plug element in. done.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: LPK1
This conversion kit includes the orifices and components needed to convert a natural gas dryer to operate on liquid propane (LP) gas. It ensures the correct fuel-to-air mixture for safe and efficient burner operation on LP. Use this kit when installing a natural gas dryer in a home that only has an LP gas supply.
More
Genuine Lg part
By: Lg
Part Number: MEE62105217
Fix evaporator coils freezing up every few months with this refrigerator defrost heater assembly. Restores proper defrost cycles in bottom-mount models.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10823697
Burner won't heat or stuck on high? This surface element restores proper heating control to your electric range stovetop. Common DIY repair.
Do-It-Yourself Stories from Customers like You
Front left burner went out Lenett J. • Ford , WA • March 30, 2020
Replaced it.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB44T10090
Oven not heating or baking unevenly? This bake element assembly restores consistent lower heat for proper cooking. Moderate DIY repair for most models.
More
Genuine Ge part
By: Ge
Part Number: WE11X20711
Fix buzzing noises or no flame in your gas dryer with a new valve assembly. Solves igniter glow without ignition. Moderate DIY repair with basic tools.
Do-It-Yourself Stories from Customers like You
Gas dryer: high pitched buzzing noise when heating. Had the dryer for ~9 years Michael G. • Arroyo Grande , CA • August 04, 2019
First replaced the gas valve solenoids but that wasn't it. After further research, replaced the gas valve. The lock arm support on the new one didn't line up with the dryer lock base but I just bent the arm back a little to fit. Made sure to use gas tape (thicker) when reconnecting the gas pipe. Verified no leaks.
No more high pitched buzzing noise.
Read more
More