Items Loose Drum Parts

The Bulkhead is an OEM component for Whirlpool dryers. As a structural panel, it secures the rear of the appliance while enabling airflow behind sliding doors. 

Formed from durable composite, the lightweight bulkhead installs easily into precise slotted tracks inside the chassis. This allows full retraction during maintenance without removing additional panels. 

Causes of a faulty bulkhead can include cracked welds or screws stripping their anchors from extreme force vibration over many years of use.

Causes of a bad bulkhead can include:

• Noisy rattling and resonance as the dryer operates  
• Restricted door movement from misalignment
• Inability to fully access internal components  
• Excessive ducting leaks from gasket compression failure

Replace yours with this genuine Whirlpool bulkhead to restore smooth, tight operation. Compatible with Kenmore, Maytag, and KitchenAid dryers.

This outer tub is the dishwasher's main outer wash tub shell that helps contain water and support internal components. Replacing a damaged outer tub restores the cabinet seal and helps stop leaks and moisture damage. What it does

• Houses and supports the inner tub, pump, and other internal components.
• Contains wash water to prevent leaks from reaching the cabinet or flooring.
• Helps maintain proper alignment for spray arms and seals to function.
• Commonly replaced when the tub is cracked, warped, or allowing water to escape.

• One outer tub.

• Disconnect power and water before starting; follow OEM disassembly steps for your model.
• Replacement typically requires removing the dishwasher door, control console, and interior components; keep fasteners organized.
• Inspect and replace gaskets, seals, and mounting hardware as needed for a watertight repair.

This tub cover replaces the outer tub housing panel and helps protect internal wash components from water and debris while maintaining proper drum alignment. It restores the appliance cabinet integrity and supports reliable washer operation. What it does:

• Covers and protects the washer's outer tub and internal components from splashes and foreign objects
• Helps maintain proper spacing and support for the wash drum
• Can reduce water leakage paths around the tub area when installed correctly
• Addresses symptoms such as visible damage to the tub housing, loose or sagging tub trim, or water spray reaching internal components

• One tub cover

• Disconnect power and water before starting any repair
• Remove the washer cabinet or front panel as required to access the outer tub; refer to model-specific service instructions
• Inspect surrounding seals, fasteners, and mounting clips and replace any damaged pieces

This is a drum assembly intended for use with dryers. This part can be found inside the dryer and is responsible for holding clothing while a cycle is running. It holds wet laundry while loading the appliance. Over time and with use, the drum assembly can start to wear out. This can cause the dryer to squeal, start and stop during a cycle, make buzzing noises, or seize up.If the drum assembly is damaged, it will need to be replaced. Make sure to have basic tools and a pair of work gloves ready. The dryer should be turned off and unplugged from the wall. Raise the top panel, remove the front panel, and then remove the drum. The drum support roller should be taken out and installed on the new drum. Reinstall with the new component and reassemble all parts before use.The drum assembly is made to be used with dryers and washer/dryer combos from Inglis, Estate, Admiral, Crosley, Roper, Magic Chef, Amana, KitchenAid, Maytag, Kenmore, and Whirlpool. It is a genuine OEM replacement part that is sourced directly from the manufacturer. The part is sold on an individual basis.

This drum wrapper assembly replaces the damaged or worn drum wrap to help the dryer drum turn smoothly and protect clothes from snags and rubbing. It restores a proper drum surface and reduces vibration and noise. What it does:

• Provides a protective wrap around the drum edge to prevent fabric from catching or rubbing
• Restores a smooth drum surface for quieter, even rotation
• Helps reduce drum vibration and scraping noises caused by worn or torn wrapper material
• Supports proper drum alignment and contact with seals during operation

• Disconnect power (and gas, if applicable) before starting any repair
• Installation requires partial disassembly of the front panel/drum—follow the OEM service manual or schematic
• Handle the drum and edges carefully to avoid cuts; use gloves and eye protection

Replacement dryer drum that holds and tumbles clothes during the drying cycle, restoring smooth rotation and preventing fabric damage. Replaces a dented, cracked, or noisy drum to improve drying performance. What it does:

• Spins and supports laundry inside the dryer so air circulates and items tumble evenly.
• Replaces a drum that is dented, warped, cracked, or rubbing—common causes of thumping, scraping, or fabric snags.
• Helps prevent further wear by restoring the smooth inner surface that clothes contact during drying.
• Works with the dryer's belt, rollers, seals and glides; damaged related components can cause repeat noise or wear.

• Disconnect power (and shut off gas supply on gas models) before starting any repair.
• Basic removal usually requires taking off the dryer front or top panel and sliding the old drum out.
• Inspect and replace worn rollers, belt, seals or glides when installing a new drum to avoid premature failure.
• Handle the drum carefully — edges may be sharp and some drums are heavy; use gloves and a second person if needed.

This outer tub is the large stationary tub that holds water for the washer and supports the inner wash basket. It restores a watertight enclosure and structural support so your washer can fill, agitate, and drain properly. What it does:

• Forms the watertight basin that contains wash water and directs it to the drain
• Supports the inner tub/basket and helps keep the basket aligned during cycles
• Prevents water from leaking into the cabinet when intact
• A cracked, warped, or corroded outer tub can cause visible leaks, loud or uneven operation, and washer shutdowns

• One outer tub

• Disconnect power and water supply before beginning any repair
• Drain remaining water and remove the washer top/lid and control panel as needed to access the tub
• Support or remove the inner tub/basket per service manual instructions to avoid damage during removal
• Inspect and replace related seals, gaskets, and clamps as needed

A replacement galvanized front bulkhead assembly with light opening that restores the washer's cabinet front and supports the door and control area. Replaces a damaged or corroded front panel to help maintain proper door alignment and cabinet integrity. What it does

• Provides the front cabinet support and mounting surface for the door and related hardware
• Includes the light opening for washer interior/accessory lights or indicators
• Restores proper door seal alignment and front-end rigidity after collision or corrosion damage
• Helps stop water intrusion and reduces vibration caused by a bent or weakened front panel

• One galvanized front bulkhead assembly with light opening

• Panel removal may require disconnecting power and detaching door, trim, and controls
• Disconnect power and shut off water before starting work to avoid shock or injury
• Handle edges carefully — metal panels can have sharp edges; wear gloves and eye protection
• Verify alignment and fastener torque during reassembly; test a short wash cycle to confirm proper operation

Outer tub assembly includes: outer tub, tub seal, drive shaft and bearings. To rebuild the tub, order the bearing and tub seal kit W10435302 and the bearing installation tool W10447783.

This cabinet shell is the outer housing that supports and protects the major components of the appliance, restoring structure and appearance. Replacing a damaged or dented shell helps ensure parts align correctly and prevents further wear. What it does

• Forms the main outer housing that holds internal components in place.
• Protects internal parts from physical damage and debris.
• Restores proper fit and alignment of doors, panels, and controls when the original shell is bent or cracked.
• Helps maintain the appliance's appearance by replacing dented or corroded outer surface.

• Disconnect power and, if applicable, gas or water supply before beginning work.
• Take care with sharp sheet-metal edges; wear gloves and eye protection.
• Fasteners, clips, or trim shown elsewhere on the product page may be required.