Cold Pump Hose Parts

The Pump-Drain is an OEM part for Whirlpool dishwasher modules. It serves as the water pump that actively removes dirty water from the wash chamber, directing it to the garbage disposal or home drainage system. 

Causes for a faulty Pump-Drain can stem from mineral buildup clogging impeller fins over time. Wear and tear on seals or electrical failure of motor components are also possible from prolonged usage.  

Symptoms of a bad Pump-Drain include:

• Incomplete draining or water remaining after cycles
• Strange gurgling or grinding noises during drain phase   
• Leaks detected around the drain hose connection
• Soap scum or film left inside from inadequate rinsing

This OEM replacement part works with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore dishwasher models as well. 

This is a combined motor and circulation pump assembly that drives water through the spray arms during the wash and rinse cycles. It is the main component responsible for recirculating water throughout the dishwasher tub. Replace this assembly if your dishwasher is not spraying water, making unusual humming or grinding noises, or failing to clean dishes properly.

Fixes washers stuck mid-cycle with standing water or not draining. Restores normal draining and cycle completion. Straightforward DIY replacement.

This fill and drain hose assembly routes water into and out of the washer, helping the machine fill, drain and operate normally. Replacing a worn or damaged hose prevents leaks and restores reliable water flow. What it does

• Carries incoming water to the washer tub during the fill cycle.
• Provides a path for water to exit during drain/spin cycles.
• Commonly replaced for visible cracks, pinholes, leaks, or kinking that restricts flow.
• Can resolve symptoms like water on the floor, poor filling, or incomplete draining.

• Turn off power and shut off water supply before beginning work.
• Inspect hose routing and fasteners; replace any damaged clamps or connectors.
• Tighten connections securely and test for leaks at low flow before a full cycle.

This 5-foot flexible aluminum vent hose is a bendable, accordion-style exhaust duct that connects your dryer's exhaust outlet to the wall vent, allowing for easy routing around obstacles in tight laundry spaces. The flexible design lets you position the dryer close to the wall even when the vent connection is not perfectly aligned. Replace this hose if it is crushed, torn, or disconnected, as a damaged hose can cause poor drying performance, excess heat buildup, or a lint fire hazard.

Joins your washer's water line to internal plumbing with a secure, leak-resistant connection. Replace this connector if cracked, worn, or leaking.

This water tube routes water from the supply to the refrigerator dispenser or ice maker so cold water and ice can flow properly. Replace a cracked or clogged tube to stop leaks and restore water delivery. What it does:

• Directs water from the house supply valve to the dispenser and/or ice maker.
• Commonly replaced for leaks, visible cracks, or frozen/clogged lines.
• Helps restore normal water flow when the dispenser or icemaker is not getting water.
• Works with the refrigerator's internal water plumbing and fittings.

• Turn off the refrigerator and shut off the water supply before beginning work.
• Depressurize and drain the water line to reduce spills; have towels handy.
• Use the correct fittings and tighten securely—do not overtighten plastic fittings.
• Check all connections for leaks after installation and restore power only when safe.

Kit contains two 10 feet inlet hoses.

Fix dishwasher not draining or cleaning issues with this pump and motor assembly. Resolves loud grinding noises and poor water circulation problems.

Stores and channels water from supply line to dispenser and ice maker. Replace if cracked, leaking, or damaged to restore proper water routing in your unit.

This is a rubber or plastic hose that connects the water inlet valve to the detergent or fabric softener dispenser in the washing machine. It carries water into the dispenser housing to flush soap or additives into the wash drum at the correct time during the cycle. Replace this hose if you see leaking near the dispenser area, the dispenser is not filling with water, or the hose shows cracks and deterioration.

Adjustable periscope vent for dryers with limited clearance. Installs between dryer exhaust and wall port. Replace if cracked, damaged, or missing.

This is the gas tube assembly that connects the gas valve to the burner assembly inside the dryer. It channels gas from the manifold to the burner where it is ignited to produce heat for drying. Replace this tube if you detect a gas smell near the dryer, notice visible damage or corrosion on the tube, or if the dryer fails to heat properly.

Replacement water tube for refrigerators. Restores proper fluid routing when the original tube is cracked, leaking, or damaged. Direct fit installation.

Dishwasher drain hose kit connects the dishwasher pump to your home's drain system. Replace if cracked, leaking, or damaged. Includes clamp.