Power Small Engine Start Switch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10168257
Fix a washer that won't advance cycles or gets stuck between rinse and spin. This cycle selector switch controls washing cycle progression.
More
$77.76
- Compare At:
-
$92.53
- You Save:
-
$14.77
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10419068
This temperature sensor mounts on the sealed-system gas inlet line in compatible refrigerators. It relays precise temperature feedback to the control so cooling and defrost cycles are managed correctly, helping maintain stable compartment temperatures. What it does:
- Senses temperature at the gas-inlet line; resistance changes are read by the control
- Helps regulate compressor, fan, and valve operation for proper cooling performance
- A failed sensor may cause erratic temperatures or extended run times
- Can correlate with control thermistor error codes or frost/ice patterns near the evaporator
What's included:
Install notes:
- Disconnect power before servicing
- Note original sensor placement and insulation; reinstall in the same location and orientation
- Attach the sensor firmly to the line and route the harness as originally, away from sharp, hot, or moving parts
- Do not open or puncture sealed-system tubing; if damage is suspected, stop.
More
$55.30
- Compare At:
-
$65.81
- You Save:
-
$10.51
Genuine Bosch part
By: Bosch
Part Number: 00414750
Fix a range hood fan stuck at full speed or not working with a new speed control switch. DIY repair typically takes 15-30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Fan worked but only at full speed. Bernard A. • Carmichael , CA • December 05, 2020
Turned off power. Removed cover over back of fan control switch. Unscrewed nut holding old switch in place. Removed clear plastic wire coverings. Hardest part of job. Photographed wires. Removed wires of old switch and replaced with wires from new switch. Had an extra green wire since old switch did not have a ground. Secured switch in panel with nut that came with it. Replaced cover on back of control switch. Turned on power and it now reduces the speed of the fan.
Read more
More
$132.31
- Compare At:
-
$156.13
- You Save:
-
$23.82
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293818
If your cooktop burner won't heat, stays on high, or won't turn off, a faulty burner control switch is often the cause. DIY repair in 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Failure of switch/controller on stove top. William S. • League City , TX • March 19, 2024
Ordered the switch from AppliancePartsPros.com and received promptly.
Read more
More
$67.95
- Compare At:
-
$80.86
- You Save:
-
$12.91
Genuine Whirlpool part
By: Whirlpool
Part Number: 37001139
This kit includes a replacement heating element and a high limit thermostat for an electric dryer. The heating element generates the hot air that dries your clothes, while the high limit thermostat acts as a safety device to prevent overheating. Replace this kit if your dryer is not producing heat, takes too long to dry clothes, or shuts off prematurely due to overheating.
Do-It-Yourself Stories from Customers like You
My dryer wasn't heating Jesus V. • Kissimmee , FL • March 27, 2017
PLEASE UNPLUG DRYER FIRST. This was my first attempt at trying to fix my dryer (Maytag SDE515DAYW). Order the element kit Part Number AP4046564. The installation was easier than I thought. Just removed the two front panels and I was able to reach the back of the dryer, under the drum (this is where the heat element was located), disconnected the wires (took pictures first) and removed the two screws that held the heat element. Pulled the part down and it just slid off. Connected all the wires...
Read more
More
$199.95
- Compare At:
-
$239.94
- You Save:
-
$39.99
Genuine Samsung part
By: Samsung
Part Number: DC97-08894A
Fix dryer that won't stop or shows tO error code. This moisture sensor assembly monitors drying cycles. Moderate DIY repair, 30-45 minutes.
More
$30.95
- Compare At:
-
$36.52
- You Save:
-
$5.57
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002784
Fixes clicking noise from compressor and fridge not cooling. Includes relay, overload protector, and capacitor. Most DIYers complete in 20-30 minutes.
This part fixes the following symptoms
-
Freezer section too warm
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Cooling dropped off in the fridge but the freezer was still working then freezer temps dropped David H. • Colorado Springs , CO • September 19, 2014
Thawed out the evap/heat exchanger assembly, replaced the overload/relay kit as well as the defrost control board and the fridge was back in business, everything working fine.
I'm kicking myself for not ordering these parts earlier. there was a clicking sound coming from the compressor that I ignored which was a huge mistake.
Read more
More
$102.32
- Compare At:
-
$122.78
- You Save:
-
$20.46
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002794
Refrigerator making clicking sounds and not cooling? This overload relay kit fixes compressor start problems. Easy DIY repair—pull off old relay and install.
Do-It-Yourself Stories from Customers like You
My compressor relay on my refrigerator failed Jared W. • Mchenry , IL • February 19, 2015
I was able to pull off the old relay and swap out with the new relay. Everything went together perfectly.
Read more
More
$111.44
- Compare At:
-
$131.50
- You Save:
-
$20.06
Genuine Frigidaire part
By: Frigidaire
Part Number: 216954200
This is a start relay device that attaches to the compressor and provides the initial electrical boost needed to start the compressor motor. It works in conjunction with the run capacitor to get the compressor running and then disengages once the motor reaches operating speed. Replace this device if the refrigerator is not cooling, the compressor clicks on and off repeatedly, or you hear a buzzing sound coming from the back of the unit.
Do-It-Yourself Stories from Customers like You
Trying to start and relay or overload just clicking off and on William K. • Morganton , NC • November 28, 2015
Works perfect now
Read more
More
$62.51
- Compare At:
-
$75.66
- You Save:
-
$13.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 241707705
Refrigerator won't cool or compressor clicks but won't start? This PTC start relay powers the compressor's start winding. Common DIY fix, restores cooling.
Do-It-Yourself Stories from Customers like You
Both overload and run capacitor burnt out Sione T. • Washington , DC • September 02, 2017
I ordered the compressor starting device kit and run capacitor to replace the burnt parts. It works right off the bat! The parts are for a Kenmore fridge/freezer. Saves Money and a trip to Dumping place. Great product and great Price. This is the second time I fix friends fridge/freezer with this repair kit from this site. Great Service!
Read more
More
$51.31
- Compare At:
-
$61.06
- You Save:
-
$9.75
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204307
Dryer not heating or overheating? A faulty temperature control thermostat often causes inconsistent heat cycles. This part regulates dryer temperature.
Do-It-Yourself Stories from Customers like You
Not heating. Ernesto C. • Hollywood , FL • August 16, 2020
Yes
Read more
More
$112.22
- Compare At:
-
$133.54
- You Save:
-
$21.32
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304468224
Do-It-Yourself Stories from Customers like You
The micro switch on the door clasp failed second time in 10 years John P. • Mcdonough , GA • June 23, 2018
Checked on AppliancePartsPros and found the parts, once I received the parts I pulled the outer cover of the microwave and replaced the three switches. For the price of the three switches it was cheaper to install all new. Total repair time, 15 minutes. Microwaves back up and running.
Very easy fix.
Read more
More
$66.55
- Compare At:
-
$79.86
- You Save:
-
$13.31
Genuine Speed Queen part
By: Speed Queen
Part Number: 55882
This is a start switch intended for use with dryers. With time or because of damage caused by accident, the start switch may stop working correctly. If the start switch isn't working, then the dryer will not function properly, and a replacement part should be ordered. If the push to start switch doesn't respond, it could be damaged or broken. Replacing the push to start switch on a dryer is a simple process. Start by unplugging the machine. Remove the back panel and pull out the old push to start button. Put the new button in its place and reattach the rear panel. Wear gloves for protection. Restore power only after the complete reassembly is performed. This push-to-start button is a genuine OEM replacement part. It is sold as an individual unit. The part is sourced from the manufacturer and made of durable materials. The push-to-start button can be installed in various dryer models made by SpeedQueen and Alliance brands.
More
$51.59
- Compare At:
-
$61.39
- You Save:
-
$9.80
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21001554
Fix washer overflowing or not stopping fill cycle. This water level pressure switch senses tub water and signals control to stop filling. DIY repair.
Do-It-Yourself Stories from Customers like You
Tub was overfilling and water would not stop until machine turned off replaved water level valve but did not solve problem Kirk N. • Oak Island , NC • April 19, 2014
Filled tub to about 6 inches and inspected washer. Noticed that the tube leading from the air entrapment bubble on the exterior side of the drum had a small leak in it. Clipped off the part of the tube that had the hole in it(it was very close to the connector nipple) reconnected and problem was solved.
Read more
More
$118.53
- Compare At:
-
$141.05
- You Save:
-
$22.52
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694419
This adjustable buzzer kit replaces a failed or noisy mini buzzer to restore audible alerts for cycles, timers and notifications. Compact design lets the appliance signal you reliably when cycles finish or need attention. What it does:
- Produces audible tones for cycle end, timers and other appliance notifications
- Replaces buzzers that are silent, intermittent, weak or emitting erratic beeps
- Helps you hear and identify completed cycles and timed alerts
- Small, mountable unit that fits behind the control panel and connects to the control board
What's included:
- One adjustable buzzer kit
Install notes:
- Disconnect power before servicing to avoid shock risk
- Access may require removing the control panel; keep fasteners organized for reassembly
- Disconnect the buzzer wiring harness or connector before removing the old unit; connect the new buzzer the same way
- Test buzzer function with power restored before fully reassembling
Do-It-Yourself Stories from Customers like You
My electric dryer wasn't heating during drying Deborah H. • Athens , MI • January 20, 2020
I was looking for a parts sight and found yours. I started to watch all the video tutorials on each part and the "check these connections first video". Well by doing this I was able to find the source of my problem. What I thought was the heating coil not working right, ended up being the timer that was bad!!! I am so very happy with your sight and the step by step videos that were the success to being able to do this on my own.
Read more
More
$71.95
- Compare At:
-
$86.34
- You Save:
-
$14.39
Genuine Speed Queen part
By: Speed Queen
Part Number: 203935
Fix a washer that won't start or respond to controls with this switch assembly. Restores electrical switching in control and safety circuits.
More
$10.95
- Compare At:
-
$13.14
- You Save:
-
$2.19