Chainsaw Foam Filter Parts

I did a little research on the internet. Seems like this is a normal issue, perhaps caused by appliance age, not sure. Anyway, it’s easy to remove the lint trap holder on the LG dryer. I replaced the old with the new part, which fit good, but required a little strength and persistence but I was successful. The new “factory part” though has changed, and my old lint trap screen didn’t fit because of the design change. I was able to modify it by cutting off the ears so it would fit flush. Perhaps... Read more

I believe we had two problems. Our gasket was ripped in several places and our drain pan line was clogged. Therefore the water was frozen and backing up into the freezer. Replacing the gasket is an easy job and could possibly be done quickly enough that you don’t have to remove your freezer food items if you don’t discover additional problems during the process. The most time-consuming part is the approximately 40 screws that hold the freezer door shelf panel and gasket to the door itself. ... Read more

My wife is attached to her old, simple, no bells and whistles dishwasher. When it started leaking from the bottom of the door, I looked up the possible fix and thought the price of the gasket probably out-valued the dishwasher. I thought that it was time to buy a new one. After looking at the prices of dishwashers (even with a Memorial Day sale) I was shocked at high they have gotten. The price of the gasket, which isn't even a third of the price of a bottom of the line DW, was looking even... Read more

Ordered a new freezer door gasket. Once I entered the model number into your system, the part was identified and then it was easy to order. Read more

The rubber seal/gasket was torn on our KitchenAid refrigerator right side door. I purchased the replacement and followed the directions/recommendations of how to prepare the new gasket for installation. When it's removed from the shipping box, it does have wrinkles and preparing it is a must. I set it out on our tile floor and then used a heat gun (low setting) to warm it up and massage it. It took me about 15 minutes, stopping and restarting as I let the rubber come back to it's desired shape.... Read more

I ordered the water filter and when it came in I replaced the one in the fridge, held the button down for 3 seconds and the light went off. Read more

Not the first time my 10 year old dishwasher developed a leak. I have learned that the tub gasket gets dirty and the gasket spring gets weak. Cleaning and if needed replacing that solves the problem. In cleaning the tub gasket this time I notice the bottom door seal had separated from the door. It was originally riveted on. This seal is part of the door assembly and not available as a separate part. You need to buy inner door to get a new seal. Not worth it on a 10 year old appliance. BUT,... Read more

• Exhaust fan not working

Replacing this filter was very easy: two screws hold in the grill cover at the top of the microwave, and then the filter just slides in and out of its holder. There was quite a bit of grease in the area, probably pulled there by the vent from the stove top. I cleaned the grease up and also hand-washed the wire-mesh filter on the bottom of the microwave with soap and warm water. Airflow when running the vent is now noticeably better. Read more

• Ice maker dispenses too little ice
• Touchpad does not respond
• Leaking

Replaced ice maker Read more

• Leaking
• Not dispensing water

I called your company with the serial number of the fridge, and had the best service locating the exact items i needed. I placed by order . and company called to confirm my order and the method of my payment. Thank you very much Read more

Ordered new gaskets from Appliance Parts Pros, arrived in 4 days. Removed old gaskets and replaced by starting at top corner and. Pushing seal into slot. Day before, opened seal boxes and spread seals to smooth out. Took about 10 minutes to replace both door seals. Right door magnetic seal improved but not great. Adjusted level and installed a 1/16” washer in door bottom hinge, which leveled door better and improved the seal strength. Read more

• Not dispensing water
• Leaking
• Ice maker not making ice

This was a tough fix because there were two causes to my problem - a stuck water valve and a bad ice maker. I first replaced the water valve, but that did not resolve the problem. Tested existing water valve and found that the valves were working properly. Returned the water valve - easy RMA process and no issues. Replaced the ice maker and problem solved. Read more

• Door sweating

Watched the repair video you provided on line and it went perfect. really like those videos. this is the second gasket we put in. Read more

Change filter Read more

Easy : Pulled off old damaged gasket and pushed on new ones. No tools needed Read more

Ordered a new screen and filter. While waiting for arrival, removed wax covered dishes. Carefully removed wax filled filter and screen cover. Stuffed paper towels in hole to absorb water and prevent wax from entering pump. Prayed ????wax had not entered pump. With plastic knife removed visible wax. Wiped out with paper towels. Used entire roll. Used hair dryer to melt remaining wax and wiped every inch of racks, wheels, glides, silverware holder, seal, floor and so forth. Oh yes I did. At 1:30... Read more