Hardware Hand Small Engine Fuel Line Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11676351
This is a replacement screw used to secure panels, trim, or small components on compatible Whirlpool appliances. Installing the correct fastener restores proper fit and helps stop rattles or loose trim. What it does:
- Secures trim, panels, or control components to prevent movement and rattling
- Replaces missing or damaged hardware that can cause gaps or loose parts
- Helps maintain proper alignment of panels and movement-free operation
- Used wherever a factory screw of this size and head style is specified
What's included: One screw Install notes:
- Always disconnect power (and water, if applicable) before servicing the appliance
- Use the correct screwdriver or driver bit to avoid stripping the head
- Install by hand until threads engage, then tighten snugly—do not overtighten
- Keep removed hardware organized before final reassembly
Do-It-Yourself Stories from Customers like You
Igniter was lighting but gas wouldn't ignite Timothy G. • Lumberton , NJ • December 21, 2014
Igniter was lighting but gas wouldn't ignite. I would see the igniter light up and smell some gas, but the flame would not light. After looking at some websites, it seemed that the igniter was weak and wouldn't cause ignition, even though it was glowing. Since the part numbers were the same, I switched the broiler and the oven igniters. The oven began working and the broiler wouldn't light. So, I ordered the new part (igniter) and replaced the broken one.
I had to pull the oven away from...
Read more
More
$13.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WB01K10012
Replacement mounting screw for range panels, brackets, and trim. Restores secure fit when original fastener is missing, stripped, or damaged.
More
$17.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WB1K5119
Factory screw secures brackets, panels, trim, or burner components on ranges, cooktops, and wall ovens. Replaces missing, stripped, or corroded fasteners.
Do-It-Yourself Stories from Customers like You
Dirty burner assemblies and worn and flakig burner grates Yvonne R. • Fernley , NV • March 11, 2015
Purchased new burner assemblies and burner grates from Appliance Parts Pros to replace old, worn out ones. This job was easy as all parts purchased were unpack and place. My range is about 15 years old but is in pristine condition so instead of replacing the range, I chose to replace dirty, worn parts.
Read more
More
$9.88
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WB1X1137
Replacement screw for securing panels, brackets, and internal components in ranges, ovens, and cooktops. Replace missing, stripped, or damaged screws.
More
$10.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8281227
Replacement mounting screw secures panels, brackets, and trim to the appliance frame. Needed when original screw is stripped, missing, or damaged.
More
$9.10
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Whirlpool part
By: Whirlpool
Part Number: 8169479
This replacement screw secures appliance panels, brackets, or internal components to keep them tight and aligned. Replace a missing, stripped, or damaged fastener to restore a solid, rattle-free fit and reliable operation.
- Fastens parts to the cabinet or frame to prevent movement
- Replaces missing, stripped, or corroded hardware that can cause looseness, vibration, or noise
- Helps correct gaps or misalignment after service
- Maintains proper support for covers, trims, or brackets
What's included: 1 screw Install notes:
- Disconnect power; shut off gas/water if applicable before servicing
- Match screw length and location to the original position
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- Repair or replace damaged clips/inserts before installing the new screw
Do-It-Yourself Stories from Customers like You
No Catherine S. • Grants Pass , OR • November 15, 2014
Yes
Read more
More
$7.56
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 316418900
Replacement screw secures panels, trim, and internal components in your appliance. Needed when original fastener is missing, stripped, or damaged.
Do-It-Yourself Stories from Customers like You
Inside portion of oven door missing screw but an important screw and a weird one Douglas M. • Jacksonville , NC • August 23, 2019
Looked at appliance diagram on AppliancePartsPros website, found the screw, ordered it and installed.....easy peasy. Have ordered a few times from AppliancePartsPros. Don't even need to be a DIY'er it is that easy. Just use a little initiative and get your parts...don't throw away a perfectly good appliance when you can repair yourself! Tip: If there isn't a part for your appliance, the same part could be on another make/model....so search.
Read more
More
$13.54
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 318246703
This installation tool assists with mounting and securing your microwave during setup. Replace if lost, damaged, or missing from your original kit.
More
$12.68
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WB01T10049
This machine screw is an authentic OEM replacement part sourced directly from the manufacturer. It is used in securing the burner head to the gas range top so that it can be used for cooking. If the burner head becomes loose or the screw is missing, it should be replaced. For safety reasons, the burner should not be used until this screw is replaced; the burner head could shift during cooking and lead to a fire. To start, disconnect the gas and power from the stove to prevent accidental ignition of the burner. Make sure the burners are not hot. Remove the burner grate and burner cap from the burner that is missing a screw. Install the new screw in the hole and tighten it with a screwdriver. Put the burner cap and burner grate back on the stove and reconnect the gas and power. Periodic inspection of the burner heads and all associated screws and parts on the stovetop will prevent accidents and keep the stove working correctly. This screw is a silver, metal part that is sold individually. It is designed for use in gas rangetops manufactured by General Electric and Hotpoint.
Do-It-Yourself Stories from Customers like You
Igniter replacement and overall maintenenance Julio M. • Tucson , AZ • February 13, 2017
Second repair after 10 years of service - igniter had cracked and spill overs were causing the others to misfire. This was a two-step process. I took apart the cooktop to see what parts were neded. Screws were all rusted, I had to drill ome out. The burner gaskets broke during the process and needed replacement. One of the burners had deformed due to excess heat. After that initial diagnose, I reassembled the cooktop without the igniters and ordered all the parts I needed. The second stage was...
Read more
More
$13.16
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WB01X10071
Secures microwave to wall cabinet mounting bracket. Replace if cracked, stripped, or missing to restore proper cabinet installation and stability.
Do-It-Yourself Stories from Customers like You
Bought a used ge profile microwave without a wall plate and it was missing a nut holder Michael M. • Lansdale , PA • October 31, 2014
Bought these two pieces through Appliance Parts Pro - they matched exactly at half the cost. Shipped same day.
Read more
More
$12.34
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Lg part
By: Lg
Part Number: 1SZZW5N001C
A factory screw for securing specified components in your appliance. Replaces a missing or damaged fastener to restore a tight, reliable hold and help reduce vibration, rattling, and misalignment.
- Secures brackets, covers, or internal assemblies where this exact screw is specified by the manufacturer
- Useful when the original screw is missing, stripped, or corroded
- Helps eliminate looseness, vibration, and rattling noises
- Matches the original fastener for proper fit and thread engagement
What's included: 1 screw Install notes:
- Disconnect power (and shut off water supply if applicable) before servicing
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- Replace any damaged clips or inserts to ensure a secure repair
More
$10.58
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 316069301
Secures the gas burner assembly to the cooktop base. Replace stripped, rusted, or missing screws to eliminate burner wobble and maintain proper alignment.
Do-It-Yourself Stories from Customers like You
Igniter housing attachment corroded away John V. • East Quogue , NY • January 13, 2017
The constant cooking and age of the appliance I repaired corroded the housing attachment that holds the igniter in place to the burner. Also the screws that hold the burner in place to the stove cover were also corroded which caused the burner itself to not stay in place but fall into the stove. By using a screw driver, lift up on the sides of the stove cover to pop the clips that hold it in place. Use a block of wood to hold up the stove cover. On the model I worked on, the igniter removes...
Read more
More
$5.74
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WB01K10093
This speed nut is a clip-on fastener that provides threads for a screw on the appliance. It secures sheet-metal panels, brackets, or trim and helps keep assemblies tight under vibration and repeated use.
- Provides captive threads so a screw can tighten into thin sheet metal
- Helps secure panels, brackets, and trim pieces in place
- Replace if a screw spins without tightening, a panel rattles/feels loose, or the original clip is missing or damaged
- Restores a snug, reliable attachment point without a loose nut
What's included: One speed nut Install notes:
- Disconnect power and, if applicable, shut off gas; allow the appliance to cool before servicing
- Note the clip's orientation; slide it onto the panel edge or stud as designed
- Start the screw by hand to avoid cross-threading; do not overtighten
- Wear cut-resistant gloves when handling sheet-metal parts
More
$7.95
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Ge part
By: Ge
Part Number: WB02T10324
6-20 x 3/8 inch nickel screw secures trim panels, brackets, and small components in dishwashers and ovens. Replace missing or stripped screws.
Do-It-Yourself Stories from Customers like You
Large element had burned out threw it all away had to order bracket from you guys to replace. Lakesha S. • Rocky Mount , NC • April 30, 2023
I positioned the element under the top of the stove and placed it back in there with the bracket and screw. Turned out perfectly.
Read more
More
$9.88
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 318246702
Installation tool for mounting built-in microwave ovens. Required for proper alignment during install. Replace if missing, damaged, or worn from use.
Do-It-Yourself Stories from Customers like You
No heat bottom coil shorted out and replaced still no heat Kirk K. • Brockton , MA • April 18, 2015
As described, thanks your helped repair what the repairman would not or could not do..
Bottom element shorted and burned up from previous homeowner, not sure why or how?
Replaced both heating elements, still no heat, the clock controller was also damaged due to the shorting even though it appeared to work OK, just no heat.
Replaced clock/controller , both elements and the temp sensor .ALL WORKING !!!
Lots of scrubbing and now have a "new" oven.!
Half the cost of the serviceman,
Saved my oven...
Read more
More
$9.45
IN STOCK
Most orders arrive by Wednesday, November 25
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304451561
Replacement mounting screw secures panels, trim, and components in microwaves. Needed when original screws are stripped, missing, or lost during repairs.
Do-It-Yourself Stories from Customers like You
The handle to my microwave was broken off David M. • Auburn , MA • May 09, 2018
I ordered a replacement handle from Appliance Parts Pro.com and installed it after watching the video at their site for a similar model. The video told of the trick on removing the door surround that allowed me to access the handle screws. I purchased new handle screws at the same time I bought the new handle. The new handle and screws were a bit different than the original but fit perfectly. Hopefully it will be more durable than the original handle.
Read more
More
$15.56
IN STOCK
Most orders arrive by Wednesday, November 25