Outer Ecb Parts

The Timer is an OEM part for GE dryers. It controls the length of the drying cycles by advancing through the cycle's various stages, including drying, cool down, and finish. This component ensures that the dryer operates for the correct amount of time based on the selected settings.

You should replace this timer if it malfunctions or fails to progress through the cycle stages properly. Common causes of a bad timer include electrical failures, worn contacts within the timer mechanism, or damage from repeated use over time.

Symptoms of a bad timer include:

• Dryer not advancing through cycles
• Dryer stopping prematurely or running continuously
• Inconsistent drying times
• Timer not moving or making unusual noises

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dryer Timer is an OEM replacement part for Whirlpool dryers. This timer controls the length of the drying cycle by regulating the electrical components of the dryer, such as the heating element and motor. It ensures that the appliance runs for the set amount of time and shuts off automatically at the end of the cycle.

Causes of a bad Dryer Timer can include wear and tear over time, electrical faults such as short circuits, or damage to internal gears or contacts. A malfunctioning timer can result in improper cycle timing or failure to start or stop the dryer.

Symptoms of a bad Dryer Timer include:

• The dryer not starting or stopping as expected
• Inability to switch between cycle settings
• The timer knob not advancing or getting stuck
• Inconsistent drying results due to premature shutoff or extended cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Timer is an OEM replacement part for GE dryers, essential for controlling the duration of drying cycles. This component ensures that your dryer operates efficiently, allowing for customizable drying times based on the type and volume of laundry being dried.  

Causes of a bad timer can vary, including electrical issues that prevent the timer from advancing, physical damage from wear and tear, or a malfunction in the internal gears that control the timer's movement. 

Symptoms of a bad Timer include:

• The dryer fails to start or stop at the designated times.
• Drying cycles that run too long or not long enough, leading to either under-dried or over-dried clothes.
• Inability to select or change drying cycles, affecting the dryer's versatility and efficiency.
• Unpredictable dryer behavior, which can include random starts or stops.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Range Main Control Board is essential for the seamless operation of your range. This genuine OEM part ensures that all functions of your appliance work correctly, providing reliable performance and precise control over cooking settings. Designed specifically for Samsung ranges, the Main Control Board integrates effortlessly with your existing system, allowing for accurate temperature regulation and consistent cooking results. Replacing a malfunctioning main control board with this genuine OEM part not only restores your rangeGÇÖs functionality but also helps prevent further issues, saving you time and money on potential repairs. Its high-quality construction guarantees durability and long-lasting performance, giving you confidence in your applianceGÇÖs reliability. Installation is straightforward, making it an ideal choice for DIY enthusiasts who want to maintain their Samsung range without the need for professional assistance. Invest in the Range Main Control Board to enhance your cooking experience and keep your kitchen running smoothly.

The Timer is an OEM part for GE electric dryers. It serves as the critical control module that monitors and regulates dryer cycle times during functions like regular, wrinkle guard, fluff and more.

Causes of a bad timer include failure of internal electronic components or wiring connections due to prolonged exposure to heat and vibration inside the dryer cylinder. Mechanical wear of buttons or dials used to program cycles may occur as well over time.

Symptoms of a bad Timer include:

• Inability to set or change desired drying times accurately
• Premature stopping or starting of cycles without user input
• Faulty time or status display windows during use
• Complete shut down requiring manual override or reset

The GE OEM part is also compatible with Hotpoint, RCA and select Kenmore models.

This main control board replaces the washer's primary electronic controller to restore cycle selection and timed operations. It re-establishes the washer's command logic so cycles start, advance, and end correctly. What it does:

• Interprets user inputs and runs the wash cycle sequence (fill, agitate, drain, spin)
• Controls timers, motor relay signals, and valve/actuator commands
• Can resolve symptoms like no cycle start, stuck or repeating cycles, unresponsive controls, or erratic behavior
• Works with related sensors and switches to coordinate machine functions

• One main control board

• Disconnect power before servicing to avoid shock or board damage
• Handle the board by edges and avoid static discharge; use ESD protection if available
• Verify connector positions and seating; transfer any required standoffs or mounting hardware from the old board

The Range Control Electronic Module is an OEM replacement part specific to Whirlpool ranges. It contains the integrated circuits and circuit boards responsible for operating all burner and oven functions.

Symptoms of a bad control module include:

• Burners failing to ignite or not working properly
• Inability to adjust temperature settings on the oven
• Lights or timers displaying error codes or not functioning
• Appliance displaying unexpected behavior or not powering on

Causes of a bad control module can be liquid spills inside the range that damage circuitry over time. Repeated heating and cooling cycles may also potentially cause internal components to degrade.

This genuine Whirlpool control module replacement is compatible with select brands such as Kenmore, KitchenAid, Maytag, and more that utilize Whirlpool parts and technology.

The Noise Filter Assembly is an OEM part for LG washing machines, designed to minimize electrical noise interference within the appliance. This essential component ensures that the washer operates smoothly without emitting disruptive sounds that can affect both the performance of the washer and the comfort of your home environment. 

Causes of a bad Noise Filter Assembly can range from wear and tear over time to exposure to power surges or electrical spikes, which can damage the internal components of the filter. 

Symptoms of a bad Noise Filter Assembly include:

• Increased electrical noise or buzzing sounds emanating from the washer
• Intermittent disruptions in the washer's performance
• The washing machine failing to start or experiencing power fluctuations

This OEM LG part is also compatible with some Kenmore models.

The Clock is an OEM part for Frigidaire ovens and ranges. This electronic component not only serves as a time display but also plays a pivotal role in the appliance's operation, allowing users to set timers, program cooking cycles, and in some models, control oven functions. 

Causes of a malfunctioning clock can include electrical surges that damage the circuitry, normal wear and tear affecting its functionality over time, and moisture or grease infiltration from cooking that can lead to short circuits or component damage.

Symptoms of a malfunctioning Clock include:

• The display is erratic or completely blank, making it impossible to read the time or set functions.
• Inability to program the oven or use the timer, affecting cooking precision.
• Intermittent operation, where the clock might reset randomly or fail to respond to controls.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Electronic Control Board is an OEM replacement part designed for Frigidaire dishwashers. It houses the integrated circuitry that monitors and directs all functions of the dishwasher like temperature, cycles, sensors, and component operation.

Symptoms of a bad electronic control board include:

• Cycles failing to start or not advancing properly
• Lights and displays not illuminating or responding as expected
• Inconsistent or no heat during the drying part of cycles
• Unusual noises or vibrations coming from internal components

Causes of a bad board can be moisture exposure damaging circuits, power surges disrupting chip performance, or natural component degradation over extended use.

This OEM Frigidaire control board is also compatible with models produced under the Electrolux, Gibson, Kelvinator, and Kenmore brands.

The Switch Assembly is an OEM replacement part for Frigidaire dishwashers. It contains a touchpad and electronic controls that operate wash cycles and drying features.

Causes of a faulty switch assembly can involve water exposure inside the door control area leading to circuitry corrosion over time.

Symptoms of a bad switch assembly include:

• Inability to select or advance through wash cycles
• Failure to heat water or activate the pump
• Erratic or stuck temperature readings
• Unresponsive buttons

This OEM Frigidaire replacement part is also compatible with dishwashers manufactured by Electrolux, Gibson, Kelvinator, and some Kenmore models.

The Timer is an OEM part for Whirlpool dryers. This part manages the duration of the drying cycles by controlling the electrical components that power the dryer. The timer ensures that each cycle runs for the correct amount of time, enabling effective and efficient drying of clothes.

Causes of a bad Timer can include internal electrical malfunctions, wear from regular use, or damage resulting from power surges or electrical issues within the dryer.

Symptoms of a bad Timer include:

• The dryer not advancing through cycles
• The dryer running longer or shorter than expected
• The dryer not turning off at the end of the cycle
• Inconsistent drying times or cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dryer Timer is an OEM replacement part for Whirlpool dryers. It electronically controls the different stages of the drying cycle, from initial heat up to final cool down. The timer allows for programmed cycles and ensures clothes are dried thoroughly and efficiently.

Causes of a bad dryer timer include water intrusion leading to corrosion, physical abuse from impact or overloading, or standard wear and tear on integrated circuits over many cycles.

Symptoms of a bad dryer timer include:

• Inability to start or continue drying programs
• Premature ending of cycles
• Erratic stopping and starting of drum rotation
• No heat function during drying
• Fault codes and shutdowns

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryers.

The Timer is an OEM replacement part for Whirlpool dryers. It accurately sequences drying functions during programmed cycles.

Symptoms of a faulty timer include:

• Inability to start or complete dry cycles  
• Drying not fully finishing within expected times
• Unexpected shutoff or prolonged run times 

Causes can be stripped internal gears or disconnected wiring terminals from extended operation.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Control Board is an OEM part for Whirlpool microwave and wall oven combinations. It is responsible for managing and coordinating the various functions of the appliance, including temperature regulation, cooking modes, and timing.

Over time, exposure to high heat and regular usage can lead to malfunctions. Physical damage or power surges can also cause the control board to fail.

Symptoms of a bad Control Board include:

• Unresponsive touchpad or display
• Inconsistent temperature control
• Error codes displayed
• The appliance not turning on or off properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Electronic Control Board is an OEM part for GE ovens. This component manages the oven's various functions, such as temperature regulation, cooking modes, and timing.

Common causes of failure include electrical surges, component wear over time, or exposure to moisture and high temperatures. A defective control board can lead to improper functioning of the oven's features and settings.

Symptoms of a bad Electronic Control Board include:

• Oven not heating or not maintaining the set temperature
• Display not working or showing error codes
• Unresponsive control buttons
• Oven shutting off unexpectedly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.