Central Pack Line Mover Float Needle Parts
Genuine Bosch part
By: Bosch
Part Number: 00165301
The Float is an OEM part for Bosch dishwashers. This float senses water levels inside the dishwasher, signaling the inlet valve to refill when needed.
Causes of a float malfunctioning can be mineral deposits accumulating and weighing it down over time, or cracks in the plastic housing allowing water in.
Symptoms of a bad float include:
- The dishwasher not filling or filling slowly
- Error codes related to fill issues
- Improper water levels impacting wash results
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Flood switch was stuck in on position drain pump would not turn off. Rick V. • Burlington , IA • April 05, 2017
Replaced the defective float switch.
Read more
More
$7.69
- Compare At:
-
$9.07
- You Save:
-
$1.38
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10077871
Fix leaking dishwasher or water overflowing onto the floor. This float assembly rises with water level to prevent overfills. Easy 5-10 minute repair.
Do-It-Yourself Stories from Customers like You
Leaking under right side Glen G. • Laplata , MD • December 06, 2015
Removed front kick plate, found overflow valve assembly leaking . When parts arrived removed and replaced overflow valve. Took about 10 minutes
Read more
More
$51.62
- Compare At:
-
$60.91
- You Save:
-
$9.29
Genuine Ge part
By: Ge
Part Number: WD15X10010
Dishwasher not filling with water or leaking? This water inlet valve controls water flow during the fill cycle. DIY-friendly replacement.
Do-It-Yourself Stories from Customers like You
Upper sprayer arm not turning Carroll B F. • Newton , IA • August 03, 2019
Replace old with a new one with a seal in it worked like a new unit.
Read more
More
$57.33
- Compare At:
-
$68.22
- You Save:
-
$10.89
Genuine Lg part
By: Lg
Part Number: AJU33450703
Fix a dishwasher that won't fill or overflows with this water inlet valve. Solves filling issues and stops leaks. Moderate DIY repair in 30-45 minutes.
This part fixes the following symptoms
-
Will not fill with water
-
overflowing
See more...
Do-It-Yourself Stories from Customers like You
Error code: EF in flow water valve would not close so water continued flowing in when power switch was turned on Mike G. • Jurupa Valley , CA • June 11, 2021
I replaced the valve.
Read more
More
$128.67
- Compare At:
-
$153.12
- You Save:
-
$24.45
Genuine Ge part
By: Ge
Part Number: WD12X334
Fix dishwasher overflows or underfilling with a new water level float. This part regulates filling by rising with water to signal the switch.
Do-It-Yourself Stories from Customers like You
1 not draining properly 2 not cleaning properly 3 not filling properly 4 not running properly 5 sump and sump cap was filthy 6 James W. • San Diego , CA • March 19, 2017
1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve.
Parts $220 for Dishwasher
Estimated Labor $400.00
Labor $0.00
Parts $100.00 for Pullout Faucet
Estimated Labor $175.00
Labor $0.00
Read more
More
$13.60
- Compare At:
-
$14.86
- You Save:
-
$1.26
Genuine Ge part
By: Ge
Part Number: WD12X10048
Dishwasher overflowing or leaking? The float stem connects your tub float to the switch that stops water flow. Quick 15-minute DIY fix for most models.
Do-It-Yourself Stories from Customers like You
Flood switch defective flooded the floor Douglas B. • Portland , MI • January 09, 2017
Ordered a new flood switch and activation stem from Aplliance Parts Pros.com. Order was delivered in about 3 days. Installed new switch and stem in about 15 min. Removed front kicker panel with two screws, the switch was just inside the panel secured with two screws. remove the electrical connector, removed screws, replace the two new parts..put the screws back in place and ran the washer...no overflows.
Read more
More
$35.95
- Compare At:
-
$42.78
- You Save:
-
$6.83
Genuine Ge part
By: Ge
Part Number: WD15X10009
Fix dishwasher water leaks or no water flow issues with this water inlet valve. Controls water fill during wash cycles. DIY-friendly replacement.
Do-It-Yourself Stories from Customers like You
No water, insufficient water Donald D. • St.Albans , VT • October 07, 2018
Replaced water valve. Using parts pro parts and you tube.
Read more
More
$74.95
- Compare At:
-
$89.19
- You Save:
-
$14.24
Genuine Whirlpool part
By: Whirlpool
Part Number: W10322576
Converting your portable dishwasher to built-in? This conversion kit includes all mounting hardware and adapters needed for permanent installation.
More
$101.95
- Compare At:
-
$122.34
- You Save:
-
$20.39
Genuine Samsung part
By: Samsung
Part Number: DD82-01588A
Not getting water in your dishwasher or water keeps running? The water inlet valve controls flow and prevents leaks. Common DIY repair fix.
More
$161.95
- Compare At:
-
$192.72
- You Save:
-
$30.77
Genuine Ge part
By: Ge
Part Number: WD12X22722
This fill funnel directs the incoming water into the dishwasher and helps contain the flow to prevent splashing and leaks. Replacing a cracked or worn funnel restores a proper, sealed water path during the fill. What it does:
- Channels incoming water into the dishwasher during the fill
- Helps seal the opening to reduce splashing and external leaks
- Common symptoms include water leaking during fill, moisture around the inlet area, or visible cracks/deformation of the funnel
What's included:
Install notes:
- Disconnect power and shut off the water supply before servicing
- Access the funnel at the water entry point for your model
- Remove the old funnel; seat the new funnel evenly and ensure the seal is fully seated
- Reassemble and run a quick fill to check for leaks
Do-It-Yourself Stories from Customers like You
Gasket was leaking John E. • Gonzales , LA • July 13, 2020
Replaced gasket and fill funnel.
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268913
If your dishwasher shuts off mid-cycle or leaks water, a warped or stuck overfill float may be the cause. This 5-minute fix restores proper fill control.
Do-It-Yourself Stories from Customers like You
The display buttons kept flashing and the dishwasher would shut off Lynn P. • Pooler , GA • June 28, 2016
Replace the motherboard and used YouTube to replace float switch. Part ordered was exactly what I needed
Read more
More
$61.56
- Compare At:
-
$72.64
- You Save:
-
$11.08
Genuine Lg part
By: Lg
Part Number: 4975DD1001A
This is a water inlet guide assembly that directs incoming water into the dishwasher tub during the fill cycle. It channels water from the inlet valve to the proper location inside the wash chamber for effective cleaning. Replace this part if you notice water leaking around the inlet area, poor fill performance, or visible cracks and damage to the guide.
Do-It-Yourself Stories from Customers like You
Drain hose had a crack and the guide assembly looked bad Mike L. • Oxford , FL • March 07, 2018
I replaced both items. And it was easier than I thought.
Read more
More
$128.67
- Compare At:
-
$153.12
- You Save:
-
$24.45
Genuine Ge part
By: Ge
Part Number: WD12X445
Fix dishwasher overfilling or not filling properly with a new float dome. Protects the float sensor for accurate water level control. Easy 15-minute repair.
Do-It-Yourself Stories from Customers like You
1 not draining properly 2 not cleaning properly 3 not filling properly 4 not running properly 5 sump and sump cap was filthy 6 James W. • San Diego , CA • March 19, 2017
1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve.
Parts $220 for Dishwasher
Estimated Labor $400.00
Labor $0.00
Parts $100.00 for Pullout Faucet
Estimated Labor $175.00
Labor $0.00
Read more
More
$15.52
- Compare At:
-
$18.47
- You Save:
-
$2.95
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8519552
Fix dishwasher overflows or won't fill issues. This water level float detects proper fill levels. Replaces broken or stuck floats causing drainage problems.
More
$55.30
- Compare At:
-
$65.81
- You Save:
-
$10.51
Genuine Bosch part
By: Bosch
Part Number: 00092188
Dishwasher not filling with water or soap not dissolving? The water inlet valve controls water flow into your dishwasher. Takes about 1 hour to replace.
This part fixes the following symptoms
-
overflowing
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Dishwasher would not clean dishes soap compartment would open but soap still in compartment Rodney K. • Honolulu , HI • October 02, 2014
The indications made me think the dishwasher was not shooting water. I checked the water valve with a voltmeter and it was getting power to open. I disconnected the line to make sure the water line was not plugged. Then I bypassed the door switch and ran the dishwasher with the door open and did not see the water filling which pointed to the inlet valve. I ordered the valve which came quickly. Replaced the valve and now the dishes are clean!
Read more
More
$234.42
- Compare At:
-
$278.96
- You Save:
-
$44.54
Genuine Bosch part
By: Bosch
Part Number: 00424099
The Impeller Jug is an OEM part for Bosch dishwashers. Located inside the wash chamber, the impeller jug is responsible for evenly distributing water throughout the dish rack during the wash cycle. It features strategically placed holes and channels that work with the spray arms to direct water flow and ensure all dishes receive thorough coverage.
Symptoms of a bad impeller jug include:
- Incomplete cleaning even on short or heavy wash cycles
- Dirty dishes remaining at the end of the cycle
- A buildup of food or grime deposits inside the wash chamber
- Off-balanced or excessive noise levels during washing
Causes of failure can be mineral or scale buildup inhibiting water flow, cracked or damaged casing allowing leaks, or worn impeller fins no longer efficiently dispersing water. Over time, hard water deposits and normal use can degrade performance.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.
Do-It-Yourself Stories from Customers like You
Dishwasher was not cleaning Matthew F. • Severna Park , MD • February 05, 2021
1) Cleaned all sprayer arms. Many of the outlet holes were clogged with small debris (mostly small bits of food and a Jolly Rancher candy wrapper).
2) Removed circulation pump to clean impeller assembly. It was really clogged with stuff (more candy wrapper, shards of glass, a small metal screw). Luckily impeller fins were intact.
3) Re-assembled. Watch for some sharp edges when re-connecting sump well.
4) Performed three or so test wash cycles pulled out from under counter to make sure I had...
Read more
More
$33.34
- Compare At:
-
$40.01
- You Save:
-
$6.67