Items Loose Drum Parts

This basket assembly is a genuine OEM replacement part sourced directly from the manufacturer for use in front-load washing machines. This assembly is part of the washer's drive system. It is on top of the clutch and transmission system. It contains the spin tube shaft and brake system for the spin basket. If the washing machine is making loud noises during the spin cycle or won't spin at all, the basket assembly should be replaced. A screwdriver, socket wrench set and ratchet, hammer, and spanner wrench are needed to make this repair. Disconnect the water and power to the washing machine. Wear work gloves when making these repairs. Make sure the machine is pulled away from the wall, and there is plenty of room to work while disassembling the machine. Remove the top console and then the washing machine cabinet. Take the tub ring and agitator off the machine. Remove the spin basket and drive block and release the drive block. Remove and replace the basket drive. Reverse the order and reassemble the washing machine. Reconnect the power and water. This basket assembly is sold individually. It is designed for washing machines manufactured by General Electric.

This part is the outer tub assembly for washing machines. It is often used in washer dryer combo units. This particular part houses the spin basket. It also holds the water during the washing cycles. In the event that the washing machine is leaking water, do a visual inspection of the outer tub to check for any cracks. If the tub has been damaged in any way, it will allow water to leak out. If this is the case, it will need to be replaced with this durable part. Make sure to unplug the washing machine from the outlet prior to attempting to replace this part. Wear work gloves to protect the hands.The tub is compatible with washing machines and washer dryer combo units that are manufactured by GE and Kenmore. It is a genuine OEM part this is sourced directly from the manufacturer. It is sold individually.

This replacement drum assembly restores the rotating drum that holds and tumbles clothes in your dryer, helping return smooth operation and reduce rubbing or scraping noises. Designed as a direct-fit service part when matched to your model. What it does:

• Houses and supports clothes while rotating during dry cycles to enable tumbling and even drying.
• Provides a smooth, durable surface to prevent clothes from catching or rubbing against the cabinet.
• Maintains correct drum alignment so the belt and rollers run smoothly.
• Common symptoms indicating a worn drum: loud scraping or grinding, visible drum wobble, or clothes that don't tumble properly.

• Disconnect power (and gas for gas dryers) before beginning any service.
• Retain original mounting hardware; additional fasteners or seals may be required if not supplied.

This tub seal assembly keeps the washer's inner tub sealed around the drive shaft to help prevent water leaks and contain wash water. It replaces a worn or damaged tub seal to restore a watertight fit. What it does

• Seals the gap between the inner tub and the transmission/drive shaft to reduce leaks
• Helps prevent water from entering the transmission area and causing damage
• Commonly replaced when you notice water on the floor or pooling under the washer
• Used when the existing seal is cracked, torn, or excessively worn

• One tub seal assembly

• Disconnect power and shut off water before starting any repair
• Replacement typically requires partial disassembly of the washer (cabinet or front panel removal) and access to the tub/transmission area
• Inspect shaft and surrounding surfaces for wear or damage and clean mounting surfaces before installing the new seal

Includes ball bearing, rear bearing, water deflector, hose clamp, spacer, motor isolator, plug & Lip Seal

This tub seal kit replaces a worn or damaged tub gasket to restore the appliance's watertight seal and reduce leaks. It's a direct-replacement style kit used during tub or pump repairs to help maintain proper sealing. What it does:

• Replaces the tub sealing components that prevent water from escaping the tub area
• Helps stop common leak symptoms like puddling or water on the floor near the appliance
• Restores a secure seal after tub or pump disassembly to reduce moisture-related damage
• Useful when service shows visible gasket wear, cracks, or hardening

• Disconnect power and water supply before starting any repair
• Drain the appliance and remove any obstructing panels to access the tub area
• Follow the OEM service manual for disassembly and correct seal orientation

This balance ring assembly helps stabilize the washer tub during spin cycles to reduce vibration and noisy operation. Replaces a worn or damaged counterweight to restore smoother, more balanced spinning. What it does:

• Acts as a counterweight around the washer tub to help reduce vibration and wobbling during high-speed spins
• Helps decrease noise caused by an unbalanced load or damaged tub support
• Can prevent excessive movement that may cause wear to suspension components
• Commonly replaced when you see persistent shaking, loud knocking during spin, or visible damage to the ring

• One balance ring assembly

• Designed for use with compatible top-load washer tubs; confirm fit for your model before ordering
• Basic mechanical skill and common hand tools required; larger repairs may require tub removal
• Disconnect power and water supply before starting any repair to avoid injury or damage

This part is a replacement drum assembly. This part's intended use is to repair a broken or defective drum assembly in washing machines.The drum is a perforated tub that holds the laundry inside the washing machine and rotates to efficiently wash and clean clothes and materials. This part is essential and will need to be replaced if it becomes worn, bent, dented, or otherwise unable to function properly. It's important that the appliance is unplugged before any attempt is made to replace this part. Work gloves are recommended for proper safety and protection.This is a genuine OEM part made by LG and has been sourced directly from the manufacturer. This is an authentic OEM replacement part made of high-quality materials. This drum assembly can be used with different models of washing machines that have been manufactured by LG, Kenmore, and some other brands. It is sold individually.

Outer tub assembly includes: outer tub, tub seal, drive shaft and bearings. To rebuild the tub, order the bearing and tub seal kit W10435302 and the bearing installation tool W10447783. When replacing this part, if you see that your motor stator is broken, search by your model number to make sure you get the right stator for your model.

This replacement dryer drum restores the rotating drum that holds and tumbles clothes during drying, helping ensure proper airflow and even drying. It's a direct-fit exterior rotating drum used in compatible Whirlpool-family dryers. What it does:

• Replaces a cracked, dented or warped drum that can catch or damage clothing
• Restores smooth tumbling to reduce noise and fabric snags
• Maintains proper airflow path for efficient drying performance
• Works with existing rollers, bearings and seals when those components are serviceable

• High-level task: remove cabinet and front bulkhead to access and swap the drum; follow your model-specific service manual
• Disconnect power (and gas supply for gas dryers) before starting any repair
• Inspect and replace worn rollers, glides, seals or bearings as needed—this drum typically does not include those components

This replacement dryer drum with a galvanized back restores smooth tumbling and helps keep clothes moving and drying evenly. Designed to match the OEM shape and fit for compatible Frigidaire dryers. What it does:

• Replaces a worn, dented or rusted dryer drum so garments tumble properly
• Reduces fabric snags, rubbing marks and uneven drying caused by a damaged drum
• Helps eliminate metal-on-metal noise from a cracked or scored drum surface
• Works with the existing rollers, seals and belt—restores the drum's rotation

• Disconnect power and move the dryer to a clear work area before starting
• Support the drum as you remove the front and rear panels to avoid damage
• Basic hand tools are required; have a helper for heavier lifts
• Inspect rollers, glides and the drive belt during installation and replace if worn

Kit Includes Front & Rear Outer Tubs with bearing Plus One Gasket. Bearings not available seperate.