Module Parts

The Replacement Icemaker is an OEM part for Frigidaire side-by-side refrigerators. It serves the critical function of automatically producing batches of ice cubes on demand. Note: The Icemaker Kit comes with an adaptor harness that may be needed for some applications. The harness converts a 4 pin connector to a 3 pin connector.

Causes of a malfunctioning icemaker can vary. They may stem from failed control sensors affecting conductivity and freeze times, scaled or corroded water lines, or an ice basket mold with broken fins and louvers.
Symptoms of a bad icemaker include:

• Reduced or inconsistent ice production
• Ice cubes getting jammed or fused together
• Water leaks or spray inside the freezer
• Strange sounds or mechanisms not working

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Ice Container Assembly is an OEM component for Whirlpool refrigerators. It is the bin that collects and stores ice produced by the ice maker. With its precise design and durable construction, the ice container allows ice cubes to easily drop down through the chute from the ice maker.

Causes of a bad ice container assembly can include cracks or broken parts that prevent proper operation. Over many uses, normal wear and tear may compromise its ability to effectively store and retain ice.

Symptoms of a bad ice container assembly include:

• Ice cubes dropping outside of the container and accumulating elsewhere  
• Difficulty removing cubes from the container
• Cracks or openings that compromise insulation and cause premature melting

This replacement is also compatible with Kenmore, KitchenAid, and select Maytag models.

The Electronic Control Board is an OEM part for GE dishwashers. As the central processing unit, it monitors and orchestrates all washing functions including temperature, spray arms, and the precise dishwasher cycles.

Causes can be moisture damage, power surges over the years, or natural degradation. Replace it with this genuine GE control board to restore optimized cleaning and sanitization along with long-term reliability.

Symptoms of a bad control board include:

• Failure to start or complete cycles
• Unusual noises or rattling sounds mid-cycle
• Inability to select different wash options
• Erratic temperature or inconsistent water levels

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.
 

The Configured Machine Control Board is an OEM part for GE dishwashers. As the central brain of the dishwasher, it controls all operation cycles and safety features.

Problems with a control board can manifest in symptoms like improper cycles, unusual noises, or failure to operate properly. Over time, normal use combined with fluctuating temperatures can accelerate component deterioration inside the board.

Symptoms include:

• Dishwasher failing to start or run full cycles
• Strange beeping or clicking sounds emanating from the unit
• Inability to change settings on the control panel
• Control board related error codes

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Ice Bucket Coupling is an OEM part for Whirlpool refrigerators. This coupling connects the ice bucket to the auger motor, allowing the motor to rotate the auger and dispense ice through the dispenser chute. It plays a crucial role in the proper functioning of the ice dispensing system by ensuring a secure and effective transfer of motion from the motor to the ice bucket's auger.

Symptoms of a failing Ice Bucket Coupling include:

• The ice dispenser not dispensing ice or dispensing it inconsistently
• The auger not rotating when the dispenser lever is pressed
• Unusual noises, such as grinding or clicking, coming from the ice bucket area
• Visible wear, cracks, or damage to the coupling

Causes of a bad ice bucket coupling can include regular wear and tear from frequent use, physical damage from ice jams or blockages, and degradation of the coupling material over time.

This OEM part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.

The Icemaker Assembly is an OEM replacement part for GE refrigerators. This assembly is responsible for producing and dispensing ice cubes. It includes all necessary components for ice production, ensuring your refrigerator has a consistent supply of ice.

Causes of a bad icemaker assembly can include wear and tear over time, mineral buildup from hard water, electrical issues affecting the control module, or damage to the mechanical components.

Symptoms of a bad Icemaker Assembly include:

• No ice production
• Ice cubes being smaller than usual or irregularly shaped
• Leaks or water pooling inside the freezer
• Unusual noises coming from the icemaker

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ice Maker Assembly is an OEM part for Frigidaire refrigerators. This part produces ice automatically by freezing water and dispensing the ice cubes into the storage bin. 

Common causes of a bad ice maker include wear and tear from regular use, issues with the water supply line, or malfunctions in the electronic controls. 

Symptoms of a bad ice maker assembly include:

• The ice maker not producing ice
• Ice cubes being smaller than usual or irregularly shaped
• Leaks or puddles around the ice maker area
• Unusual noises coming from the ice maker

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Ice Crusher Housing is an OEM part for Frigidaire refrigerators. This housing encloses the ice crusher assembly, ensuring that ice is crushed efficiently and delivered smoothly through the dispenser. It is designed to securely hold the crusher components in place and guide the ice into the dispenser chute.

You should replace the ice crusher housing if it becomes damaged or worn out. Causes of a bad ice crusher housing can include repeated impact from ice, cracks or breaks from overloading, or wear and tear from regular use.

Symptoms of a bad ice crusher housing include:

• Ice not crushing properly
• Leaks or moisture around the ice crusher area
• Loud or unusual noises during operation
• Visible cracks or damage to the housing

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Ice Container is an OEM part for Whirlpool refrigerators. It is designed to store ice produced by the icemaker, providing a convenient and accessible solution for dispensing ice.

Causes of a bad Ice Container can include cracks or breaks due to regular use, impact damage, or warping from exposure to varying temperatures. Accumulation of ice or frost can also lead to problems with the container’s integrity and function.

Symptoms of a bad Ice Container include:

• Ice spilling out or not being contained properly
• Cracks or visible damage to the container
• Difficulty in removing or inserting the container
• Ice clumping or melting due to poor insulation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This ice maker assembly replaces the refrigerator's frozen-water mold and harvesting mechanism to restore automatic ice production and ejection when the refrigerator and water supply are working normally. It delivers reliable ice-making performance without reworking existing cabinets. What it does

• Freezes and cycles water into the ice mold, then ejects cubes into the storage bin
• Restores automatic ice production when the original ice maker fails
• Helps address common symptoms like no ice production, intermittent ice making, or ice not ejecting
• Works with the fridge's existing water supply and wiring to resume normal operation

• One ice maker assembly

• Disconnect power and shut off the water supply before starting
• Handle the unit carefully to avoid damage to the mold and linkage; use basic hand tools
• Follow factory service instructions for mounting and wiring; check electrical connections and water inlet after install
• Test ice-making cycle after installation and verify proper water fill and harvest

The Refrigerator Ice Maker Assembly is an essential component for maintaining the ice-making functionality of your Samsung refrigerator. This genuine OEM part is specially designed to ensure a perfect fit and seamless compatibility with a wide range of Samsung refrigerator models. Crafted from high-quality materials, the ice maker assembly delivers reliable and consistent ice production, so you can enjoy fresh ice whenever you need it. Installing this genuine OEM part not only restores your refrigeratorGÇÖs performance but also enhances its efficiency, helping to keep your kitchen running smoothly. The durable construction of the ice maker assembly ensures long-lasting performance, reducing the need for frequent replacements and providing you with peace of mind. Whether your current ice maker is malfunctioning, cracked, or damaged, the Refrigerator Ice Maker Assembly offers a straightforward solution to restore full functionality to your appliance. Trust in this genuine OEM part to deliver the quality and reliability you expect from Samsung, ensuring your refrigerator operates at its best.

The Main Control Board is an OEM part for Frigidaire dishwashers. This essential component acts as the central nervous system for the appliance, orchestrating all its functions and operations. It regulates the washing cycles, water temperature, drying phases, and more, ensuring that your dishwasher runs smoothly and efficiently. 

Causes of damage to the main control board can range from electrical surges that fry the electronics, to moisture exposure leading to corrosion or short circuits, and even normal wear and tear over time. 

Symptoms of a bad Main Control Board in a dishwasher include:

• The dishwasher failing to start or complete cycles.
• Erratic behavior such as stopping mid-cycle, not draining, or failing to heat the water.
• Displaying error codes that indicate issues with the system's control or electronic components.
• The buttons or controls not responding correctly, or the dishwasher behaving unpredictably.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Ice Bucket & Auger is an OEM replacement part for GE refrigerators. This assembly includes both the ice bucket and the auger, which work together to store and dispense ice. The ice bucket holds the ice, while the auger moves the ice from the bucket to the dispenser when you request ice from the refrigerator's front panel.

Symptoms of a bad Ice Bucket & Auger include:

• Inability to dispense ice
• Unusual noises when attempting to dispense ice
• Ice clumping together in the bucket
• Visible damage to the bucket or auger

Causes for a malfunctioning Ice Bucket & Auger can include wear and tear from regular use, mechanical issues with the auger's rotation, or damage to the bucket from impact or mishandling.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ice Bucket and Auger Assembly is an OEM replacement part for GE refrigerators. It consists of an ice storage bucket and an automatic ice-making auger. Together, these parts facilitate reliable ice harvesting, storage, and dispensing.

Causes of a bad ice bucket and auger assembly can include damaged auger parts from jamming, worn gears preventing smooth rotation, or cracked ice storage infrastructure inhibiting ice retention and dispensing accuracy.

Symptoms of a bad ice bucket and auger assembly include:

• Incomplete emptying of old cubed ice or filling of new ice
• Jamming or grinding noises coming from the ice maker
• Ice cubes spilling from the bucket during operation
• Difficulty dispensing individual cubes from the dispenser door

This OEM GE part is also compatible with some Hotpoint, RCA, and select Kenmore refrigerator models.

The Ice Maker and Auger Motor Assembly is an OEM part for LG refrigerators. This assembly is responsible for both producing ice and dispensing it from the ice maker. The ice maker produces ice cubes, while the auger motor drives the auger to move ice from the ice bin to the dispenser chute, ensuring a steady flow of ice whenever needed.

Causes of a bad assembly can include electrical issues, wear and tear from regular use, or damage to the motor or ice-making components. A malfunctioning assembly can lead to inconsistent ice production and dispensing problems.

Symptoms of a bad ice maker and auger motor assembly include:

• No ice production or insufficient ice
• The auger not dispensing ice properly
• Unusual noises from the ice maker area
• Ice jams or clumps in the ice bin

This OEM LG part is also compatible with Sears/Kenmore models.

The Ice Level Arm is an OEM part for Whirlpool refrigerators. It is an component of the ice maker, responsible for sensing the ice level in the ice bin and controlling the ice production cycle. When the ice bin reaches capacity, the ice level arm signals the ice maker to stop producing ice, ensuring efficient operation.

You should replace this ice level arm if it becomes faulty. Causes of a bad ice level arm can include mechanical wear and tear, accidental damage, or issues with the connection to the ice maker mechanism.

Symptoms of a bad Ice Level Arm include:

• Continuous ice production, leading to overfilling
• The ice maker not producing ice even when the bin is empty
• The ice level arm not moving freely or appearing stuck

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.