Power Snowblower Engine Foil Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11562931
Seals oven door to prevent heat loss and maintain consistent temperature. Replace if frayed, flat, or allowing smoke/heat to escape. Clips install easily.
Do-It-Yourself Stories from Customers like You
Oven gasket required replacement Peter W. • Wareham , MA • October 07, 2014
Removed existing gasket and replaced with new gasket in less than 5 minutes. Very Easy.
Make sure to remove the lower burner cover (inside the oven) which allows you to pull the end gasket material through the two circular openings in the frame.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB06T10007
Clear protective tape secures glass panels and components on your cooktop. Replace when tape loses adhesion or during glass panel repairs. Confirm fit.
Do-It-Yourself Stories from Customers like You
Element was bad on stove Gary C. • Stone Ridge , NY • October 22, 2016
Ordered the parts from Appliancepartspros.com and watched their helpful video on how to do it. When the parts came, which was very quickly, I removed the stove, took it apart, replaced the element and put it back in place in less than an hour.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3391914
Dryer won't heat or overheats? The high limit thermostat monitors drum temperature. Moderate DIY repair with heater housing access required.
Do-It-Yourself Stories from Customers like You
My whirlpool dryer was not getting hot Anthony D. • Sanibel , FL • May 01, 2016
I purchased a new heating element. Very easy to fix in about twenty minutes
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DC47-00017A
Dryer won't heat or stops heating mid-cycle? The high limit thermostat cuts power when temperatures spike. Easy 15-minute fix with video guide.
Do-It-Yourself Stories from Customers like You
My dryer would not heat up Chris R. • Glen Saint Mary , FL • January 07, 2015
When starting my dryer the motor would power up and rotoe the drum and blower. Afetr about 20-30 seconds the igniter would come on then the gas valve would open and I would get heat for about 6 or 7 seconds then it would shut off. I know the burner is suppoed to cycle on and off but once the burner shut off it would not come bqack on unless I shut the dryer off and then back on. I checked for continuity on the thermistor, the thermal fuse and the high temp sensor. All three of them appeared to...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB04T10050
Seals your oven door to retain heat and maintain consistent cooking temperatures. Replace if torn, cracked, or heat escapes. Verify fit with your model.
Do-It-Yourself Stories from Customers like You
Gasket on oven door was damaged due to burnt food Joseph Y. • Montgomery , IL • July 10, 2015
This job was fast. About 2 minutes. Just need to pull the old gasket out. Generally can be done with your hands but may need pliers if any of the metal wires get caught.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10467289
The Water Temperature Sensor is an OEM part for Whirlpool washing machines. This sensor ensures the water is reaching the proper temperature at each stage of the wash cycle. Note: The sensor does not include the seal W11590578. Order separately if needed.
Causes of a bad temperature sensor can be failures over time due to mechanical wear, thermal stress on electronic components, or damage from leaks/flooding inside the unit.
Symptoms of a bad water temperature sensor include:
- Inability to switch between wash steps or advance through the cycle
- Erratic or inconsistent temperature readings
- Failure alarms or error codes displayed
- Improper or incomplete washing even on high heat settings
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
F2 e3 error code on front load duet washer Mark M. • Saratoga Springs , NY • September 16, 2016
Replace the water temperature sensor and still had the error code. While I had the back of the machine open I ran the washer. I traced the black wires from the temperature sensor and wiggled them as the washer was running. At one zip tie every time i moved the wires the washer would stop running and the error code would flash. Sure enough, like many others posted, the vibration from the machine had split the wire. I spiced the wire back together and have not had a problem since.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 279264
Replaces worn dryer front bearing and seal that cause squealing or scraping noise. Essential for smooth drum rotation. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
Noisy & inefficient Richard M. • Indianapolis , IN • December 06, 2016
After having replaced the drum support rollers twice in a roughly 3yr period, I realized something wasn't quite right, and indeed it wasn't. I had been ordering the wrong parts - I did use the online parts locator after checking, & double checking my model number. Apparently my older Whirlpool dryer has a somewhat ambiguous model number because the rollers that were shipped each time looked nothing like the originals. I realize that is not particularily uncommon - manufacturers often modify...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11623080
Replace your wall oven door cavity gasket when heat escapes or condensation appears. Creates an airtight seal for optimal cooking temperatures. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
The gasket had become irreparably soiled and detached Susanna F. • Albany , NY • December 24, 2018
Bought a replacement gasket.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 137539200
Dryer won't heat or shows E66 error? The thermal limiter prevents overheating by monitoring airflow. Moderate DIY repair, requires rear panel access.
Do-It-Yourself Stories from Customers like You
E66 error code. Door open came on and dryer would not turn on at all other than display of error. Bruce H. • South Elgin , IL • March 15, 2014
I actually found a post from another brave soul who was willing to try to fix his, and had stated when he put the new limiter switch in, it fixed the problem.
Since the whole back of the dryer needs to come off to get to the burner, and the limiter switch is inexpensive it seemed like common sense to take this approach first. After all, you don't put a new engine in your car if all it needs is a new battery!
I also found posts that an overheating event could fry the main control board, and...
Read more
More
Genuine Speed Queen part
By: Speed Queen
Part Number: D510523
Fix dryer overheating issues with this thermistor assembly. Monitors temperature and sends readings to the control board. DIY-friendly repair part.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134786100
This moisture sensor consists of two metal strips typically mounted inside the dryer drum area that detect the moisture level in clothing during a drying cycle. It signals the control board to end the cycle when clothes reach the desired dryness. Replace this sensor if your dryer shuts off too early with clothes still damp, runs too long, or if the auto-dry cycle no longer functions properly.
Do-It-Yourself Stories from Customers like You
The sensor-moisture clip was broken off and needed to be replaced. Edgar D. • Bradford , AR • April 06, 2014
Simple unscrewed the set screw, removed the broken sensor-moisture part, attached the leads, and reattached the part to the back of the dryer. Took about 4 minutes.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP307473
Dryer won't start or heat? A blown thermal fuse cuts all power to protect against overheating. Easy 30-minute DIY fix with multimeter testing.
Do-It-Yourself Stories from Customers like You
Catastrophic failure of the dryer cycling thermostat in a maytag neptune super stack Richard M. • Cornish , NH • October 19, 2020
Through 15 years of vibration, the Cycling Thermostat evidently had degraded to the point where one electrical connection or more came loose and caused a short. There is also a possibility that the Bakelite section of the Dryer Cycling Thermostat body separated from the metal base, simultaneously exposing all four connections to a short. The thermostat literally exploded into chunks and dust. There was a heavy arcing and then, thankfully, the thermal fuse blew and shut down power to the short...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB4K1
Seals the gap between oven door and body to retain heat during cooking. Replace if cracked, worn, or heat escapes. Verify fit with your model number.
Do-It-Yourself Stories from Customers like You
Previous tenant's apparent oven fire. Randolph M. • Chicago , IL • October 19, 2018
The previous tenant in my daughter's new apartment apparently had a grease fire of sorts in the GE XL44 gas oven. This left the insulating double glass panes so fouled up that one could not see into the oven. I removed the oven door (just lifts off the hinges) and proceeded to disassemble the door so as to get to the glass panes. That's when the real problems arose: the window seal rope, which lays around the edge of the opening to the oven, was burnt to a crisp -- see photos. The oven...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33001762
Dryer won't start or run? A blown thermal fuse is the likely cause. This safety component cuts power if temperatures get too high. Easy 15-min fix.
Do-It-Yourself Stories from Customers like You
Catastrophic failure of the dryer cycling thermostat in a maytag neptune super stack Richard M. • Cornish , NH • October 19, 2020
Through 15 years of vibration, the Cycling Thermostat evidently had degraded to the point where one electrical connection or more came loose and caused a short. There is also a possibility that the Bakelite section of the Dryer Cycling Thermostat body separated from the metal base, simultaneously exposing all four connections to a short. The thermostat literally exploded into chunks and dust. There was a heavy arcing and then, thankfully, the thermal fuse blew and shut down power to the short...
Read more
More
Genuine Ge part
By: Ge
Part Number: WE1X21975
Dryer won't start or run? A blown thermal fuse is often the cause. This safety part cuts power when overheating occurs. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Didn’t go on. Christina S. • Levittown , NY • February 16, 2018
The part I ordered fixed my problem
Read more
More
Genuine Speed Queen part
By: Speed Queen
Part Number: D504515
Dryer not heating or not getting hot enough? The cycling thermostat regulates temperature during the drying cycle. Moderate DIY repair for most users.
Do-It-Yourself Stories from Customers like You
Dryer problem no heat Judith T. • Suffield , CT • May 19, 2025
Replaced thermostat.
Read more
More