Drip Pan Parts

This dispenser drip tray sits beneath the ice/water dispenser recess to catch small drips and spills. Replacing a cracked or missing tray helps protect the door and floor while keeping the dispenser area neat and easier to clean. What it does:

• Collects water and beverage drips from the dispenser area
• Helps prevent moisture from running down the door or onto the floor
• Restores a clean, finished look if the original is cracked, warped, stained, or missing
• Improves fit if the old tray no longer sits securely

• One dispenser drip tray

• Unplug the refrigerator and turn off the water supply before servicing
• Lift the old tray straight out; clean the recess of debris and residue
• Align and press the new tray in until it sits flush and secure
• Do not force or pry against surrounding trim to avoid damage

This square drip pan is used on gas ranges. Color: chrome. It measures about 8 inches wide by 8 inches deep.

This 6-inch trim ring frames the surface element opening on your cooktop, giving it a clean, finished edge and helping center the element. Replace a discolored or warped ring to restore appearance and proper fit. What it does:

• Frames the 6-inch surface element opening and helps center the element
• Protects and covers the cutout edge for a clean, finished look
• Replaces rings that are rusted, stained, warped, or dented
• Helpful when the element doesn't sit level or gaps appear around the burner

• 1 trim ring (6-inch)

• Disconnect power and allow the cooktop to cool completely before servicing
• Lift/remove the surface element per your product's instructions to access the ring
• Remove the old ring and seat the new ring in the opening with correct orientation
• Reinstall the element and confirm it sits level and securely

This drain trough directs defrost water from the evaporator to the refrigerator drain, helping prevent pooling, leaks and ice build-up in the fresh-food compartment. A correct trough keeps defrost water flowing and reduces odors or floor damage. What it does:

• Channels defrost/condensate water from the evaporator to the drain system
• Prevents water pooling under shelves or in the crisper area
• Reduces ice buildup and attendant leaks when the drain path is clear
• Replace if cracked, warped, or if water is collecting where it shouldn't

• Disconnect power to the appliance before servicing
• Remove interior shelves/drawers as needed to access the trough
• Clean the drain channel and clear any debris before installing the new trough
• Make sure the trough is fully seated and aligned so water drains properly; follow OEM fastener/placement points

This dispenser drip tray catches water and minor spills beneath the refrigerator's ice/water dispenser, helping keep the grille area dry and protecting the door from moisture damage or staining.

• Collects drips and splashes from the dispenser to prevent puddling on the door
• Helps reduce staining, mineral residue, and odors around the dispenser area
• Sits in the dispenser grille for easy removal and cleaning
• Common signs it's needed: cracked or warped tray, excessive water on the dispenser shelf, or a missing tray

• Unplug refrigerator or switch off power before servicing
• Lift out the old tray from the dispenser grille; clean area
• Seat the new tray flat and flush in the grille opening
• Verify proper fit and stability before restoring power

This drip tray sits beneath the grate area to catch grease and boil-overs, helping keep the cooktop cleaner and protecting components below. Replacing a bent, corroded, or missing tray restores proper fit and appearance. What it does:

• Collects drips, grease, and spills under the grate area
• Helps prevent liquids from reaching the burner box or wiring
• Supports correct placement of the grate/grill assembly
• Common symptoms: missing tray, heavy rust, warping, leaks or messes under the top

• 1 drip tray

• Disconnect power and shut off gas; allow the appliance to cool completely
• Remove the cooking grates/grill section to access the tray
• Lift out the old tray and position the new one with correct orientation
• Reinstall grates and verify proper seating and clearances before use

This replacement lid restores the appliance's finished top cover, protecting internal components and helping the door/hatch close properly. Use when the original lid is cracked, warped, or missing to keep the unit looking and operating as intended. What it does:

• Covers and protects the appliance's top/opening area from debris and damage.
• Secures to existing hinge or mounting points to ensure proper closure.
• Replace if you see visible cracks, chips, warping, or if the lid no longer latches or aligns.
• Helps prevent rattling or rubbing caused by a damaged or loose lid.

• Disconnect power (and water, if applicable) before starting any repair.
• Handle edges carefully; some lids include glass or thin sheet material that can chip.
• Basic hand tools (screwdriver/torx) may be required; keep mounting hardware if reusing.

This is a refrigerator drip pan kit. It is located on the bottom of the appliance and is used to help catch condensation from the appliance. Any moisture that is made while the refrigerator goes through its operation cycles will collect in the pan to prevent a mess. If the drip pan has been damaged, the most common symptom is water dripping on the floor. Checking for a clog should be done. If the actual part is damaged, it will need to be replaced.Before replacing the drip pan kit, unplug the power cord on the appliance and pull the refrigerator from the wall. Use a nut driver to release the water inlet line coupler before taking off the access panel. Reach in and bend the pan retaining tab, open the doors of the appliance, and take off the water filter cover. Remove the toe plate to access and replace the drip pan.This is a genuine OEM drip pan kit that can be used as a replacement for Dacor, Jenn Air, Hardwick, and Maytag refrigerators. It is sold as an individual component and is provided directly from the manufacturer.

This drip tray collects and channels defrost and condensation water away from the refrigerator interior to help prevent pooling and musty odors. Replacing a cracked or warped tray restores proper water management and reduces leak risk. What it does:

• Captures defrost and condensation runoff and directs it to the drain/evaporation area.
• Prevents water from pooling inside the cabinet or beneath the appliance when functioning correctly.
• Common symptoms that indicate replacement: visible cracks or warping, standing water under the fridge, or persistent musty odors.
• Designed as a direct replacement for the factory drip tray specified for the appliance.

• Disconnect power to the appliance before beginning any service.
• Remove any shelves or drawers needed to access the old tray; handle carefully to avoid damaging surrounding components.
• Do not force the tray into place; make sure it seats correctly in the drain channel and sits flat.
• If water problems continue after installing the new tray, inspect the drain path and drain tube for clogs or damage.

A replacement drain pan that captures defrost and condensation water to keep it contained and away from the cabinet and floor. Restores the appliance's normal water-collection path and helps reduce leaks. What it does:

• Collects melting ice and condensation from the evaporator to prevent water from pooling under the appliance.
• Channels collected water toward the drain system so it evaporates or exits as designed.
• Stops common symptoms like puddles or moisture under the unit and musty odors caused by standing water.
• Fits under the evaporator/coil area to restore proper water management.

• Disconnect power to the appliance before service to avoid electrical hazards.
• Remove the required access panels or move the appliance per the manufacturer's guidance to reach the pan.
• Lift out the old pan carefully—it may contain standing water—and position the replacement so the drain outlet and routing match the OEM layout.
• After installation, restore power and check for proper water flow during a defrost cycle; inspect surrounding seals and tubing for proper seating.

This trough drain collects and channels defrost and condensation water from the evaporator area to the drain system, helping prevent leaks and pooling inside the refrigerator. It restores proper water flow and reduces standing water. What it does:

• Collects defrost/condensation runoff from the evaporator area and directs it to the drain pan.
• Helps prevent water pooling inside the fridge or under crisper drawers.
• Reduces ice buildup and musty odors caused by trapped moisture.
• Replaces cracked or warped troughs that allow leaks or improper drainage.

• Disconnect power to the appliance before beginning any work.
• Remove food, shelves and the evaporator cover/pan as required for access; follow the service manual for your model.
• Clean the drain tube and drain hole before installing to ensure proper drainage.

Replacement drip tray in white that installs under the appliance to collect spills and direct water away from internal components, helping prevent damage and making cleanup easier. What it does:

• Catches leaks, drips and overflow to protect the cabinet and floor.
• Directs water away from controls and electrical components to reduce risk of damage.
• Replaces cracked, warped or discolored trays that no longer hold water.
• Helps limit staining and makes routine cleanup faster.

• Disconnect power to the appliance before starting any work.
• Access the tray by removing the lower access panel or kickplate as required for your model.
• Remove the old tray and slide or snap the replacement into place; avoid forcing parts.

This drip tray is the evaporator drain pan that collects defrost and condensate water to help prevent leaks and water damage beneath the appliance. It restores proper drainage and keeps the cabinet dry. What it does:

• Collects and channels defrost/condensate water away from internal components
• Helps prevent water pooling under or around the appliance
• Reduces risk of water-related damage and odors when installed correctly
• Fits into the factory location to restore original drainage performance

• Disconnect power to the appliance before beginning service to avoid shock.
• Access the tray by removing the lower access panel or grille per the owner's manual.
• Inspect surrounding seals and drain tubing; clear any clogs before installing the new tray.
• Handle parts carefully to avoid damaging adjacent panels; for model-specific instructions.

This replacement shield is a direct-fit protective cover that restores the appliance's factory protection for internal components. It prevents contact with sensitive parts and helps keep wiring and controls clear of debris. What it does:

• Protects wiring, controls and nearby components from heat, moisture and debris.
• Restores the original barrier that helps prevent accidental contact with moving or hot parts.
• Replaces cracked, broken or missing shields that can lead to rattling, exposed components or interference.
• Helps maintain appliance safety and quiet operation when installed correctly.

• One replacement shield

• Always disconnect power to the appliance before starting any repair.
• Handle replacement shield carefully — edges may be sharp; use gloves and basic hand tools.
• Retain and reuse original fasteners unless new hardware is specified; ensure shield is properly seated and secured.
• Do not operate the appliance with shields or covers missing.

Color: silver. Measures about 9-1/2 inches wide by 5 inches deep.

This product is a Whirlpool refrigerator drip pan for the evaporator. The drip pan is in place to catch water created from defrosting or condensation created by the evaporator. A damaged or clogged pan will lead to water leaking underneath the appliance. Substantial leaks from the refrigerator need to be inspected. Typically the two leading causes would be a worn-out seal from the door causing ice to melt or a clogged or damaged drip pan. Carefully examine the drip pan to ensure it's not just a clog, which is easily fixable. Any cracks or more significant damage means a replacement should be ordered.Access the drip pan by removing the bottom vent of the refrigerator. The drip pan is connected to the evaporator. Unplug the refrigerator to ensure safety before making any repairs. Carefully unscrew the nut that fastens the connecting line between the evaporator and the drip pan with a wrench. Remove the old drip pan and insert the new product. Make sure the nut is tight enough to make a good connection between the evaporator and the new component.This product is compatible with Whirlpool, Admiral, Magic Chef, Jenn-Air, and KitchenAid appliances. This is a genuine OEM product sourced directly from the original manufacturer.