Keypad Parts

This is the white front control panel for the console/user-interface area. It restores a clean appearance and a secure mounting surface for the controls so the console fits and feels solid after damage or wear.

• Provides the outer control-console panel that supports/aligns the user interface components
• Protects and positions the keypad/display area for proper fit and feel
• Common replacement reasons: cracked or broken panel, missing/broken tabs, warping, discoloration, or loose/ill-fitting console
• Helps ensure controls sit correctly and are easy to access

• Disconnect power before servicing; be aware the high-voltage capacitor can retain a dangerous charge
• Remove mounting screws/clips and release locking tabs carefully to avoid damage
• Transfer any switches, control board, bracket, or overlay from the original panel as required by your model
• Route wires/ribbons carefully and avoid over-tightening fasteners; test all controls before final reassembly

This control panel assembly is the front user interface housing for your appliance. Replace a cracked, loose, or damaged panel to restore a secure fit and dependable access to the controls for everyday operation.

• Holds and aligns the keypad, display, and related switches for proper use
• Provides mounting points for the electronic control components
• Protects internal controls from everyday wear and minor impacts
• Helps address issues like a broken bezel, missing tabs, or a loose/misaligned panel
• Restores a clean, factory look to the user interface area

• Disconnect power at the breaker before servicing
• Remove trim/grille and mounting screws; support the panel to avoid stressing wiring
• Transfer any brackets, switches, and display/board from the original panel, noting wire locations
• Reassemble and test all controls before final mounting

This user interface mounts in the dishwasher door and contains the keypad you press to choose cycles and options. Replacing a failing UI restores responsive controls and reliable communication with the main control so the cycle can start and run.

• Interprets button presses and sends signals to the electronic control to run the selected cycle
• Common symptoms: unresponsive or intermittent buttons, won't start, erratic lights/beeping, or only certain options work
• Issues may stem from moisture intrusion, a worn keypad, or a damaged ribbon connection

• Disconnect power at the breaker before servicing
• Open the door and remove inner-door/console screws to access the UI; support the panel to avoid strain
• Handle the ribbon cable carefully and observe ESD precautions; transfer any clips/insulators from the old part as needed
• Reassemble and test keypad functions before final tightening

This adhesive graphic overlay covers the electronic control panel, restoring clear, readable button labels and a clean, factory appearance. It helps you operate settings confidently when the original overlay becomes worn, faded, or damaged. What it does:

• Provides printed labels/icons for the electronic control's buttons and display
• Protects the control face from everyday use, spills, and cleaning
• Common symptoms: peeling edges, bubbling, cracking, discoloration, or unreadable text
• Cosmetic component; if keys don't respond, the keypad or control board may require service

• 1 adhesive control panel overlay

• Disconnect power before servicing
• Remove the control panel/EOC as needed to fully access the old overlay
• Carefully peel off the old film; remove all adhesive residue and clean the surface with isopropyl alcohol
• Test-fit alignment, then peel and apply from one edge while smoothing to avoid bubbles

The Control Panel is an OEM part for Frigidaire dishwashers. Located at the front of the dishwasher door, the control panel features buttons and displays that allow for the selection and monitoring of wash cycles. Printed electronic circuits distribute input signals to initiate the appropriate cycle settings.

Causes of a bad Control Panel can include cracked or damaged screens, non-responsive buttons, or failures of internal electronic pathways over time. 

Symptoms of a bad Control Panel include:

• Faulty or unreadable display screens  
• Random cycle activation without input
• Repeated error codes or flashing lights
• Physical damage or loose components  

This genuine OEM Frigidaire part is compatible with some Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models as well.

This complete parts assembly replaces a damaged or worn internal assembly to restore proper fit and function. Use it to repair an appliance component assembly and help the unit operate as intended. What it does:

• Replaces the original internal assembly that secures or connects related components
• Restores mechanical and/or electrical connections to help correct intermittent operation
• Can address symptoms like a non-functioning subassembly, degraded performance, or unusual noises tied to a damaged assembly
• Matches OEM form and mounting points when the correct part number is used

• One parts assembly

• Disconnect power (and water, if applicable) before beginning any repair
• Use basic hand tools and avoid force when removing clips or fasteners
• Retain all fasteners and orient the new assembly to match the original

Color: Black

This is the factory console assembly for the control area. It replaces a cracked or damaged panel and restores a secure, finished mounting surface so the appliance's knobs and switches stay aligned and operate correctly.

• Houses and supports the timer/controls so they mount securely
• Protects and organizes wiring within the control area
• Restores proper alignment for knobs and switches
• Replaces cracked, warped, or broken consoles that cause loose or misaligned controls

• Disconnect power before servicing; wear cut-resistant gloves when handling sheet-metal parts
• Remove control knobs and any retaining screws; lift off the old console
• Transfer your existing timer/control switches, brackets, and trim to the new console; take photos to document positions
• Reinstall and verify controls move freely and the console is firmly secured before restoring power

Color: Black

This control panel is the replacement console assembly that houses the user controls and front interface. It restores a clean, readable control surface so buttons and settings are easy to see and operate. What it does:

• Replaces a cracked, faded, or damaged control/console panel to restore the appliance's front interface
• Provides the mounting surface and openings for control buttons, knobs, and the display area
• Helps resolve symptoms like unresponsive or sticking buttons, hard-to-read labels, or a loose front console
• Matches the original white finish to maintain the appliance's appearance

• Always disconnect power (unplug or shut off breaker) before starting any repair
• Handle attached wiring and connectors carefully; connectors may be clipped into the console
• Basic hand tools are typically required; keep fasteners and trim pieces for reassembly
• Test electrical components before returning the part

This control panel assembly is the front console that houses the oven/range user interface and display, restoring visible controls and user input so you can select cycles, set temperatures, and monitor settings. What it does

• Contains the control interface (buttons/touchpad and display) used to select functions, temperatures and timers.
• Re-establishes visible feedback and input when buttons are unresponsive or the display is blank or flickering.
• Helps restore control of oven/range functions when the console is cracked, damaged, or failing.
• Works as the direct replacement for the damaged or nonworking control console to return normal user operation.

• Disconnect power at the breaker or unplug the appliance before starting—electrical shock hazard.
• Handle the display and trim carefully to avoid damage; some wiring harnesses or connectors must be disconnected and reattached.
• Keep track of screws and retainers; a basic screwdriver set is usually required.

Color: Black

This control panel overlay (T09-B) is the decorative face for the appliance control console, restoring button labels and appearance while protecting the underlying switches and electronics from spills, grease and everyday wear. What it does:

• Provides labeled button and indicator surfaces so controls are clear and easy to read.
• Protects the control board and switches from splashes, food residue and dirt.
• Replaces faded, cracked, peeling or scratched overlays that hurt appearance and usability.
• Can help with button errors caused by a worn or damaged overlay by restoring proper button contact surfaces.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Remove the control console or trim per the service manual to access the overlay; avoid forcing parts.
• Peel away the old overlay, clean and dry the mounting surface, then align and press the new overlay evenly; some overlays use adhesive and may require light pressure.

Color: Black

This control panel replaces a cracked, worn, or unresponsive console so your appliance can reliably accept cycle and option selections again, restoring a clean appearance and smooth button action.

• Provides the interface area for selecting cycles and options
• Houses and aligns user-interface components and mounting hardware
• Protects and routes the UI connector/ribbon, when present
• Restores proper fit and finish on the front/top of the unit
• Typical symptoms: cracked or broken console, buttons binding or sticking, worn labels, or selections not registering when the touchpad is integrated into the console on your model

• Disconnect power to the appliance before servicing
• Remove screws to access the console; note hardware locations and wire/ribbon routing, and use care around sharp edges
• Handle any ribbon/IDC connectors by the stiffener; seat fully and level
• Transfer any reusable clips, brackets, or overlays/nameplates from the old panel; test keys before final reassembly

This black clock overlay is the front label for the electronic oven control. Replacing a worn or peeling overlay restores clear button markings and a clean, factory look, making the control panel easy to read and use.

• Attaches to the electronic oven control (EOC) and labels the clock/timer and oven function keys
• Restores legibility when graphics are faded, cracked, bubbled, or peeling
• Refreshes the finished appearance of the control panel
• Works with the existing electronic control; cosmetic/labeling component

• Disconnect power at the breaker before servicing
• Remove the control panel/EOC as needed to access and remove the old overlay
• Clean and dry the mounting surface; align carefully and press evenly to apply
• Reassemble and restore power; keys correspond to the correct labels