Handle End Cap Parts

Color: White. For biscuit use 98017790T. For black use WP98017790B.

Color: Black

The Handle Kit is an OEM part for Frigidaire electric ranges. It contains a replacement handle and hardware to securely fasten it to the oven door. As a high-touch surface, oven handles can become worn, damaged, or loose with regular cooking use over time. 

Causes of a faulty handle include signs of wear like scratched finishes, loose fastening, or broken/cracked plastic. Other factors are repeated heating cycles from oven use or occasional impacts.

Symptoms of a bad handle include:

• Loose, dangling, or detached handles   
• Rough or sharp edges presenting a safety hazard
• Handles too hot to grasp comfortably during/after cooking  
• Broken fasteners compromising secure attachment

Color: Black

This complete OEM Frigidaire handle kit restores a like-new grip and appearance. Precision-machined handles ensure a seamless fit for years of safe, reliable use. This kit is also compatible with some Electrolux, Westinghouse, and Kenmore models. 
 

Color: Stainless.

This black oven door handle replaces a cracked, loose, or missing handle and restores a secure, comfortable grip on your range. It matches the original finish and helps keep the door easy to open and close.

• Provides a sturdy handhold for opening and closing the oven door
• Replaces a handle that is cracked, broken, loose, or missing
• Helps eliminate wobble and improves door control
• Refreshes the appliance's appearance with a matching black finish

• Disconnect power and allow the oven to cool completely before servicing.
• Support the door and glass while removing inner trim screws to access the handle fasteners.
• Transfer existing end caps/mounting hardware from the old handle; align the new handle and tighten screws snugly—do not overtighten.
• Reassemble and check that the handle is secure before use.

This end cap finishes and secures the exposed end of a handle, rail, or trim piece on your appliance. It restores a clean look and helps keep the attached component stable during everyday use.

• Covers the open end of a handle/rail and conceals fasteners for a finished appearance
• Helps hold the mating piece in place to reduce looseness, rattling, or wobble
• Replace if the existing cap is cracked, missing, warped, or will not stay attached
• Can help address issues like a loose handle/rail, exposed screws, or sharp/unfinished edges

• Disconnect power to the appliance before servicing; shut off gas/water if applicable
• Note the cap's orientation and any side-specific features before removal
• Release retaining tabs or remove the set screw (as applicable), then align and press/fasten the new cap into place
• Do not overtighten fasteners; verify secure fit and smooth operation after installation

Restore a solid, comfortable grip on your freezer door with this black Freezer Door Handle. It replaces a damaged or worn handle to bring back dependable daily use and a clean, factory look.

• Provides a sturdy handhold for opening and closing the freezer door
• Direct replacement for a cracked, broken, loose, or missing handle
• Refreshes the appliance's appearance if the old handle is scuffed or discolored
• Installs on the existing mounting points for your model

• Unplug the appliance and secure the door before service.
• Access and loosen the handle's set screws or mounting screws, then remove the old handle.
• Position the new handle; transfer and tighten existing fasteners evenly—do not overtighten.
• Verify smooth door operation and alignment after installation.

Color: Stainless

This is a refrigerator door handle that lets you easily open and close the door while providing a clean, finished look. Replacing a worn or broken handle restores proper grip and appearance.

• Provides a secure grip to open/close the refrigerator door
• Common fix for a loose, cracked, or broken handle
• Restores original appearance when the handle is scuffed or yellowed

• Unplug the appliance before beginning
• Use the correct driver to avoid stripping screws
• Support the handle as you remove/install screws to prevent misalignment
• Do not overtighten; align handle to door trim before final snugging

This replacement block is a small structural component used inside the refrigerator to locate, support, or align its mating parts. Replacing a worn or broken block restores proper fit and helps keep the affected assembly secure. What it does:

• Provides a stable mounting/locating point for the applicable assembly
• Helps maintain alignment and reduces wobble or looseness
• Common failure signs: cracks, missing piece, or stripped fastener hole
• Symptoms may include rattling, sagging, or parts that won't stay in place

• 1 block

• Unplug the refrigerator before servicing; wear cut-resistant gloves
• Remove items and any obstructing parts to access the block; note orientation for reassembly
• Transfer any reusable hardware from the old block and secure the new block without overtightening
• Restore power and verify proper fit and operation of the serviced area

Color: Stainless
The Handle is an OEM part for Whirlpool refrigerators. This handle attaches to refrigerator doors, allowing for intuitive opening and closing.

Causes of a bad handle can include wear from frequent use over multiple years, damage from excessive force or impacts, or deterioration of mounting brackets and fasteners.

Symptoms of an issue with the handle include:

• Loose, unstable or wobbly handle movement
• Difficulty opening/closing the refrigerator door
• Discomfort gripping the handle during use
• Visible cracks, breaks or detachment from the door

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This freezer door handle restores a secure, comfortable grip on your refrigerator's freezer door. Replace it when the original is cracked, loose, or missing to maintain safe operation, clean appearance, and easy everyday access.

• Provides the handhold used to open and close the freezer door
• Attaches to the door's existing mounting points/fasteners for a secure fit
• Helps resolve issues such as a broken, cracked, or wobbly handle
• Can improve ease of opening if the old handle has failed

• Disconnect power before servicing; wear cut-resistant gloves
• Support the old handle, then loosen/remove its fasteners; note their placement
• Position the new handle on the existing mounts and tighten fasteners evenly
• Do not overtighten; verify alignment and that the handle is secure

This replacement door handle restores a secure, comfortable grip for opening and closing your microwave door. Replace a cracked, loose, or missing handle to keep everyday use safe and your appliance looking clean and complete. What it does:

• Provides the primary grip point to open and close the microwave door
• Restores proper leverage and feel when the original handle is damaged
• Helps resolve issues like a loose, wobbly, or broken handle
• Improves appearance when the original handle is scuffed or cracked

• 1 door handle

• Disconnect power to the microwave before servicing.
• Protect the door/front panel from scratches; support it while working.
• Access and remove the handle's mounting screws/fasteners from the inner side of the door; transfer any spacers as needed.
• Hand-tighten mounting screws and ensure door opens/closes smoothly without binding.

Color: Black

This door handle provides a sturdy, comfortable grip for opening and closing the appliance. Replace a cracked, loose, or missing handle to restore safe operation and refresh the appearance of your kitchen or laundry equipment.

• Provides the handhold needed to open and close the appliance door or drawer
• Transfers pulling force to the door without stressing the latch or hinges
• Restores usability and appearance when the original handle is damaged or worn
• Common symptoms: cracked or broken handle, looseness, missing handle, difficulty opening the door

• Disconnect power before servicing; allow hot surfaces to cool if applicable
• Protect surrounding finishes; support the door or drawer to reduce strain while removing/installing the handle
• Refer to your model's parts diagram for fastener type and location; reuse model-specific screws/caps if applicable
• Align the handle and tighten fasteners evenly—do not overtighten

Color: Stainless

The Handle is an OEM component specifically designed for Whirlpool refrigerators. It provides easy access and convenient opening of the refrigerator door.

Symptoms of a bad handle include: 

• Difficulty or instability when opening the refrigerator door
• Looseness, wobbling or detachment from the door 
• Cracks or breaks that compromise safety and function

Causes can include normal wear and tear over prolonged use, excessive force, or damage from falls or impact. 

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Handle is an OEM part for Whirlpool refrigerators. It allows for easy opening and closing of the freezer door. This handle is designed to provide a sturdy grip, making it convenient to access your food items.

A bad handle can be caused by wear and tear over time, excessive force applied to the handle, or damage due to accidental impact or mishandling.

Symptoms of a bad drawer handle include:

• Difficulty in opening or closing the door.
• Loose or wobbly handle.
• Cracks or breaks in the handle.

Replace your worn-out or damaged handle with this OEM part and restore your refrigerator. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.