High Voltage Control Board Parts
Genuine Ge part
By: Ge
Part Number: WD21X31908
Fix a dishwasher with no display, unresponsive buttons, or blank control panel. This user interface board restores control panel function. DIY install.
Do-It-Yourself Stories from Customers like You
Totally dead no power. Michael Y. • Riverview , FL • February 23, 2024
Flipping the breaker worked 5x until it just died totally. New UI board brought it back to life.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8299778
Dryer won't shut off or advance through cycles? A faulty timer prevents automatic shutoff and cycle progression. Moderate DIY repair restores normal operation.
Do-It-Yourself Stories from Customers like You
The timer would not advance during dry cycle so would not turn off unless i turned it to the off position Sarah S. • Van Buren , AR • August 01, 2014
I ordered a timer from Appliance Parts Pro, I watched the video on how to install it, I installed the timer and it works fantastic! I am now so glad that I can be busy and hear the buzzer go off to let me know that the clothes are now dry. Thank you so much Appliance Parts Pro!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8577356
Fix a washer that won't advance through cycles or gets stuck on wash. This mechanical timer controls cycle progression. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Timer went in kenmore washer Carrie B. • Schuylerville , NY • December 05, 2014
The repair guy was going to charge me upwards of $225 to replace the timer in my washer, if in fact it was the timer. I decided with Christmas just a month away that there had to be a better way. After speaking with one repairman, and then searching on the internet, I found out the problem with my Kenmore washer was probably the timer. Sears was going to charge me a lot to ship the timer and they wouldn't allow me to return it if after replacing it, it wasn't the problem. So, I got back on...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134743500
Washer won't spin or shows communication error? The motor control board controls spin speed and motor functions. DIY repair in 30 minutes with video guide.
Do-It-Yourself Stories from Customers like You
E5b error code on frigidaire gallery front load washer Michael B. • Seattle , WA • October 26, 2015
This was the motor control board (also called the speed control board, motor control unit, or MCU in various places across the web). The repair was straightforward, except for two complications. First the old part was difficult to access in this model washer (Frigidaire Gallery Series front load washer). Instead of being easy to reach on the left side where there was space, it was sort of behind the actual motor on the right side of the housing. I spent some time trying to figure out...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 316560118
The Control Board is an OEM part for Frigidaire ranges. This part manages and regulates the functions of the range, including the oven temperature, cooking modes, and timing, ensuring precise control and efficient operation.
Causes of a bad control board can include electrical surges, overheating, or component failures due to regular wear and tear.
Symptoms of a bad Control Board include:
- The range or oven not powering on
- Inaccurate temperature settings
- The display showing error codes or not functioning properly
- Unresponsive or malfunctioning buttons and controls
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
F11 error on my Frigidaire gas range/oven Rebecca T. • Lincoln , NE • November 26, 2019
I googled the error code and symptoms my oven was exhibiting to determine the solution and which parts to order. I needed a new control panel and chose also to replace the overlay that shows on the front of the stove. I could have reused the old one because I turned out to be able to remove it without damaging it. I just kept it in case I damage the new one in the future. The “fast” shipping (not overnight) option had the part delivered the next morning, which was a nice surprise.
I felt...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10199989
If your washer won't advance cycles, stops mid-wash, or fills incorrectly, the control timer may be faulty. Moderate DIY repair, replaces defective timer.
Do-It-Yourself Stories from Customers like You
Washer stopped in the middle of a cycle tub was full of water and wet clothes Richard J. • Harwich , MA • July 09, 2015
Based on symptoms it looked like the timer was not working. I did a web search to confirm this and found your web site. Entering the model number of the washer (Whirlpool) I found the timer and related information. This confirmed my diagnosis. I also looked at the video on how to change the timer. This was invaluable! The video saved me hours and probably a washing machine. I ordered the timer, it arrived as promised, I installed it per directions and the machine works...
the video makes...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10185970
The Timer is an OEM part for Whirlpool dryers. It controls the electrical components and the timing of the dryer cycles, ensuring that clothes are dried for the appropriate amount of time.
Over time, timers can become faulty due to normal wear and tear, electrical surges, or internal mechanical failure. If the timer motor fails or the contacts inside the timer wear out, it will no longer be able to accurately regulate the dryer’s cycle duration.
Symptoms of a bad timer include:
- Dryer not starting
- Dryer running continuously without advancing through the cycle
- Dryer stopping mid-cycle
- Inaccurate cycle times
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer not heating Glen W. • Plano , TX • August 20, 2014
Checked all of the thermostats for continuity and all were working so I just replaced timer. That fixed the problem.
Read more
More
Genuine Ge part
By: Ge
Part Number: WR55X11072C
This electronic control board manages your refrigerator's key systems—compressor, fans, and defrost. When the original board fails, you may see warm temperatures or erratic behavior; replacing it restores stable cooling and proper defrosting.
- Regulates compressor and fan operation to maintain set temperatures
- Controls adaptive defrost timing and energizes the defrost heater
- Distributes power to critical loads and processes sensor inputs
- Helps with: no cooling or intermittent cooling, compressor/fans not running, heavy frost from no defrost, or unresponsive/erratic controls
What's included: 1 main control board Install notes:
- Disconnect power before servicing; risk of electric shock
- Use ESD protection; handle the board by the edges only
- Photograph and label connectors; transfer wires exactly and fully seat each plug
- After installation, restore power and follow any model-specific service sheet/configuration steps provided with the appliance
Do-It-Yourself Stories from Customers like You
Front door would no longer dispense cold water Marc B. • Port Orange , FL • February 18, 2018
After some simple troubleshooting, determined that it was likely the (rear) main control board. Once the new board arrived, it was installed in 5-10 minutes once the refrigerator was pulled out from the wall and the area cleaned up a bit. My only negative feedback was that delivery was too slow by today's standards. Fedex Post was used and in my experience it usually adds an extra 2-days compared to other ground shipping methods. The part was ordered on Sunday night. It shipped out of...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10366605
Freezer icing up or refrigerator too warm? This defrost control board coordinates defrost cycles to prevent frost buildup. DIY-friendly 15-30 min repair.
Do-It-Yourself Stories from Customers like You
Whirlpool refrigerator evaporator frozen up with ice along with warm refrigerator compartment Wesley W. • Millbrook , AL • February 26, 2015
Tried to put refrigerator in defrost mode and defrost would not initiate. Checked the bi-metal and heater, both tested good. Replaced the ADC board and refrigerator went in to defrost. problem solved.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD21X31903
Fix a dishwasher that won't turn on or has non-responsive buttons with this control panel interface board. DIY-friendly repair, typically takes 20 minutes.
Do-It-Yourself Stories from Customers like You
The dishwasher controls not working; door was leaking when it worked. Miles M. • Easton , PA • April 22, 2023
Replaced UI board and lower door gasket. Followed the instructions and luckily both the UI board and lower door gasket were in the dishwasher door. Took about 20 minutes and the GE dishwasher is now working like new again! Fast shipping and reasonably priced- thank you AppliancePartsPros.com!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 285938
Fixes washers that won't advance through cycles or stop mid-cycle. Timer controls wash cycle progression and automatic shutoff. DIY install in 10-20 minutes.
Do-It-Yourself Stories from Customers like You
Cycles would not complete Jonathan G. • Newton , MA • December 21, 2016
I could not find specific online instructions for this job. Here are some tips.
1. Unplug the washer.
2. Unscrew the dial on the broken timer.
3. Gently pry up the thin plastic place-indicator plate (the thing with the arrow under the dial) with two flathead screwdrivers.
4. Unscrew the two hex screws holding the old timer in place.
5. Unscrew the phillips-head screws holding the console in place and flip up the console.
6. Remove the electrical connector from the bad timer, and remove the bad...
Read more
More
Genuine Ge part
By: Ge
Part Number: WE04X25281
Dryer won't shut off or advance cycles? A faulty timer control is likely the cause. This part controls all timed drying phases. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Timer switch failed to work Gary R S. • Janesville , WI • November 28, 2025
Ordered part from appliance parts pro,replaced and dryer is drying again
Read more
More
Genuine Ge part
By: Ge
Part Number: WD21X22177
Fix a dishwasher that won't respond to button presses or has all lights stuck on. This control panel interface board restores operation. DIY repair.
Do-It-Yourself Stories from Customers like You
User interface board was bad. David H. • Elkhart Lake , WI • April 30, 2023
Replaced the board and put it back together.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 316455430
This is the electronic oven control board that manages cooking functions including temperature regulation, bake and broil cycles, and clock/timer operations. It mounts behind the control panel at the back of the range. Replace this board if the oven fails to heat, displays error codes, has an unresponsive control panel, or runs at incorrect temperatures.
Do-It-Yourself Stories from Customers like You
No oven no ignighter nothin' honey Beth H. • Easton , MD • July 12, 2015
There was no power coming out of the control board to the igniter so I replaced the board and walay it work and all is good in the kitchen
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8572976
Washer won't advance cycles or skips rinse/spin? Timer controls wash, rinse, and spin cycles. Common DIY fix—most complete repair in 10 minutes.
Do-It-Yourself Stories from Customers like You
Dysfunctional washing machine timer Jeffrey E. • Fort Scott , KS • March 23, 2015
I diagnosed the problem, identified faulty parts, and replaced those components.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2204605
Fridge won't cool or stay cold? Temperature control thermostat regulates cooling cycles. Easy 10-minute repair—no special tools needed. Video guide included.
Do-It-Yourself Stories from Customers like You
Refrigerator would not stay cold Daniel M. • Eagleville , CA • March 10, 2015
Easy fix in less than 10 minutes. I replaced the thermostat control. I first shorted the two wires that went to the control and let it run for 1 hour. The temperature was dropping and the freezer was freezing.
Read more
More