Roller Parts

Received the part, and easily removed the two metal covers on the front of the trash compactor (total of eight small metal screws) to gain access to the backside of the roller assembly (locking nut). Used a socket wrench to unscrew the nut and removed the old assembly. The new assembly easily bolted into location, followed by reinstalling the metal covers. All in all, a quick and easy repair. Read more

I determined that it was a problem that occurred during the defrost cycle by resetting the GFCI outlet and forwarding the defrost timer until the defroster came on. Once the defrosting began, the GFCI outlet would reliably trip. I took apart the shielding inside of the freezer and tested the defrosting without the heating element or the thermostat connected. Since that looked good, I tested for proper functionality of the thermostat by removing it, placing it in a working freezer, and checking... Read more

Replaced both wheels after watching your video. easy repair Read more

Installed a new top rack wheel support arm. The repair took less than 5 minutes. I appreciated the repair video on how to remove old support arm and end cap. Read more

I replaced the upper nozzle guide, nozzle shaft and upper spray arm. I also replaced the pump gasket for good measure. Top rack dishes had not been cleaning properly. I first removed the filter assembly to inspect the main pump from above. It was clogged but after cleaning and reassembly I observed that while middle and bottom spray arms were changing position, the upper spray arm was not. I confirmed that water was flowing through the upper spray arm by placing some empty yogurt pots on a... Read more

Ordered replacement parts and installed them. A lot less expensive than having a dealership fix it. Read more

I replaced the drum bearing in the back and also the nylon sliders in the front. It rook some time but was not difficult. I took some extra time to thoroughly clean all the lint from the inside. Read more

Replaced dishwasher control panel Read more

Bought new strip then found that both of the wheels had worn flats on them and had to purchase newwheels. Read more

Kenmore Elite refrigerator 795.77542600 Fixed by replacing crisper cover. The purchased crisper cover lacks the printed pictures and text that was present on the front of the original, but it was no big deal. The difficult part of the repair was transferring the (1) plastic humidity adjusters for vegetable/fruit drawer, (2) plastic crisper drawer covers, and (3) metal bar on front underside of crisper cover. Removal of the adjusters and drawer covers requires you to bend/distort the plastic... Read more

This was a problem that I'd had previously with this mixer. The worm gear, which is designed to fail (so that more serious damage does not occur to the motor), did fail while I was mixing some multi-grain bread dough. After the previous failure (pre-youtube days), I took the machine in for repair. The repair-shop cost came to about $150 in labor. Parts were extra. This time, I decided to do the repair myself, since I figured that I knew what was wrong. I found the appliancepartspros... Read more

Replaced dog ears. Read more

Acualy sounded and looked major but with a littel help with you tube the job only took 30 minutes. 3 bolts for the water pump pulley broken pulley poped off new one klick into place simple belt install good to go. Parts saved me $40 and where here in only 2 days. I couldnt be happyer. Read more