Back Top Parts

This rear panel replaces the back cabinet cover on compatible Whirlpool dryers, protecting internal components and helping direct vent airflow. It restores a secure, finished exterior and keeps wiring and controls shielded. What it does:

• Covers and protects the dryer's internal components at the rear, including wiring and control assemblies
• Helps maintain proper venting path and airflow by providing the correct rear opening and mounting surface
• Prevents debris, pets, and accidental contact with internal parts
• Stops rattling or flexing caused by a bent or damaged back panel

• Disconnect power (and gas supply on gas models) before starting any repair
• Remove the dryer from the wall and disconnect the vent to access and replace the rear panel
• Use appropriate hand tools to remove and reinstall mounting screws; retain hardware if reusing
• Handle edges carefully to avoid cuts; secure all fasteners before returning dryer to service

This black cooktop is the top panel of the range. It forms the cooking surface and supports the surface burners, restoring a clean look and secure burner alignment when the original top is chipped, dented, or damaged.

• Serves as the main cooking surface and mounting platform for surface burners and related components
• Helps contain spills and shields internal components from heat and debris
• Corrects issues like warped or dented tops that cause burners to rock or sit unevenly
• Refreshes appearance when enamel is heavily chipped, scratched, or rusted

• Disconnect power and, if applicable, shut off gas supply before servicing
• Remove grates, burner caps, and burner heads; retain all screws and hardware
• Lift off the old top; transfer any brackets, insulation, and screws from the original top as required
• Reassemble carefully; check for leaks on gas models

This backsplash assembly replaces a damaged or worn backguard on your range or oven, restoring the appliance's rear trim and protecting the wall behind it. It returns a finished look and proper support for controls and wiring cover. What it does:

• Covers and protects the rear upper area of the range/oven, hiding wiring and mounting points
• Restores a finished appearance when the original backsplash is dented, cracked, or discolored
• Provides mounting surface for control panels and associated trim pieces
• Helps prevent grease and splatter from reaching the wall behind the appliance

• Disconnect power to the appliance before starting — this part sits near control wiring.
• Remove the range/oven from the cabinet opening as needed for access; two people may be required for safe handling.
• Use existing mounting hardware if service instructions do not list included fasteners; follow OEM instructions for proper alignment.
• Wear gloves to protect against sharp metal edges and avoid damage to finish during installation.

This backsplash assembly replaces the rear cover panel on compatible ranges to restore a finished appearance and protect wall surfaces behind the appliance. It matches factory fit and styling for a clean, OEM look. What it does:

• Covers the rear area of the cooktop to protect drywall from splashes, spills, and heat.
• Restores the appliance's original rear panel appearance after damage or wear.
• Helps prevent grime and grease buildup on the wall behind the range.
• Fits as a direct-replacement assembly for affected range models.

• Designed for direct replacement; follow your range owner's manual for removal and reinstallation.
• Disconnect power and ensure the range is cool before servicing to avoid shock or burns.
• Use common hand tools; secure all fasteners snugly but avoid overtightening.

This main top is the replacement cooktop surface for select electric ranges, restoring a flat, secure mounting area for burners and controls and improving appearance and function. What it does

• Replaces a damaged, dented, or warped cooktop top so burners and components mount correctly
• Restores a flush, stable surface that helps prevent gaps or misalignment around elements
• Addresses visible cosmetic damage like deep scratches, chips, or paint loss
• Helps eliminate rattling or instability caused by a bent or loose top

• One main top

• Disconnect power to the range before starting and verify the unit is de-energized
• Removal typically requires lifting the front edge and unfastening screws or clips; some models may require removing the control panel first
• Handle carefully to avoid damaging trim or finish; two people may be helpful for positioning larger tops
• Use manufacturer-recommended fasteners and verify alignment before fully tightening

Color: Black

This replacement inner oven door glass restores a clear viewing window and helps contain heat for safe, efficient baking. It fits into the oven door assembly to replace cracked, chipped, or cloudy glass. What it does:

• Restores a clear view into the oven cavity so you can monitor cooking without opening the door
• Helps seal the door to reduce heat loss and maintain consistent cooking temperatures
• Replaces cracked, shattered, or damaged inner glass that can compromise safety or appliance performance
• Matches OEM fit and form for a secure installation when used with the correct door hardware

• High-level job: remove the oven door, disassemble door panels to access inner glass; reassemble in reverse order
• Handle glass carefully and wear cut-resistant gloves and eye protection
• Inspect door seals and mounting clips during reassembly; replace any damaged hardware

This trim ring is a replacement surface trim piece that restores the finished look and edge around the appliance opening. It provides a clean, secure edge and replaces bent, cracked, or missing trim to improve appearance and fit. What it does

• Covers and finishes the exposed edge of the appliance opening for a clean appearance
• Secures and aligns adjacent components by providing a stable mounting edge
• Addresses cosmetic damage such as dents, cracks, or paint loss around the opening
• Helps prevent small items from getting caught in the exposed edge

• One trim ring

• Disconnect power to the appliance before starting any repair
• Removal typically requires loosening mounting screws or clips; keep hardware for re-use unless damaged
• Handle edges carefully; part and surrounding metal may be sharp
• If the trim mounts to or around other components (elements, panels), support those parts during removal and reinstallation

Color: White.

This electronic control module manages oven functions and timing so the range heats and cycles correctly. It replaces a faulty control board to restore display, bake/broil control, and timed cooking features. What it does:

• Regulates oven temperature and heating cycles for bake, broil and timed operations
• Manages front display, clock and user control inputs
• Enables/controls sequencing of safety and heating elements
• Commonly replaces a module when the display is blank, controls are unresponsive, or oven cycles improperly

• Disconnect power at the breaker before starting any repair
• Handle the module carefully to avoid ESD damage; use anti-static precautions if available
• Follow the appliance service manual for removal and replacement steps; mounting hardware and connectors must be secured

This rear panel is the replacement cabinet back panel that restores the appliance's exterior enclosure and supports internal components. It provides a clean, secure rear surface and helps protect internal wiring and parts from damage. What it does

• Replaces a dented, rusted, or damaged rear cabinet panel to restore proper enclosure and airflow
• Shields internal components and wiring from dust, debris, and accidental contact
• Helps maintain proper venting clearance and appliance stability when mounted correctly
• Prevents sharp edges and gaps that can cause injury or allow pests into the cabinet area

• Disconnect power (and gas if applicable) before servicing; ensure appliance is fully de-energized
• Remove rear access screws and any attached components carefully to avoid damage
• Align panel, secure with manufacturer-specified fasteners, and verify there are no gaps or pinched wires

A galvanized top panel that replaces the oven/stove top surface to protect internal components and restore a clean exterior. Durable steel construction resists corrosion and provides a correct mounting surface for cooktop parts. What it does:

• Covers and protects internal components under the cooktop from spills and debris
• Restores a secure mounting surface for burners, grates, and control components
• Helps stop visible rust, warping, or gaps around the cooktop area
• Reduces rattles or movement caused by a damaged or loose top panel

• Disconnect power and gas supply (for gas ranges) before starting any work.
• Use care handling metal parts; edges may be sharp—wear gloves and eye protection.
• Basic hand tools are typically required; follow the appliance's service manual for proper removal and reinstallation.
• Replace any damaged clips or screws.