Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Range hood light won't stay on or flickering? Loose or melted light socket is often the cause. This socket assembly plugs into the main harness. 5-minute fix.
I pulled out the wiring harness for the bulb and really inspected the sockets. (The wire connections on one of the sockets were really loose and the inside of that socket was a little melted.) I replaced the light wiring harness and sockets. It was a really simple fix. I turned off the power to the range hood at the breaker box first. I removed the filters and the light bulbs. I only needed a medium sized crosspoint screwdriver to remove 5 screws that hold up the light housing. The... Read more
Range hood fan not running or making noise? This motor drives the fan blades to ventilate cooking fumes and odors. Moderate DIY repair with basic tools.
Disconnect power, remove panel that covers motor/fan wiring, take some pictures of wiring connection, unplugged wiring, removed motor bracket, replaced new motor in brackets, reinstalled all components. Read more
Secures grease filters in place on your range hood. Replace when springs are worn, broken, or missing to prevent filter rattling and dropping. Verify fit by model number.
Replacement kit arrived quickly. There were directions and a little cleaning pad. Cleaned the surfaces and installed clips. Original clips were plastic and these were metal. Perfect fit. Read more
This replacement utility motor restores motorized rotation for compatible appliances, helping components move or drive belts and pulleys so the appliance can operate normally. Designed as a direct-fit service part when original motor fails. What it does:
This switch assembly restores dependable control of your range hood or ventilation unit, helping resolve unresponsive or intermittent controls so the appliance turns on, off, and changes settings as expected.
Uneven simmering or hot spots? This simmer ring restores precise low-heat flame control on gas burners. Simple DIY fix for consistent cooking temps.
Rubber bushing that reduces vibration and noise in range hood assemblies. Replace if worn, cracked, or missing to restore quiet operation and stability.
Mounting ring for range hood installation. Secures hood to cabinetry or wall. Replace if cracked, warped, or missing to ensure proper fit and stability.
Replacement cover panel for range hood exterior. Installs on the main housing to complete the finished appearance. Order when original is cracked or missing.
Replace a range hood motor that won't spin or runs loud. Restores proper airflow and ventilation. Moderate DIY repair, typically 1-2 hours with cleaning.
Exhausts horizontally to the outside....look at the picture of that beautiful motor.... The hood is nearly 30 years old.. I had replaced the blowers a few years ago and re painted the hood also from white to black to match the oven.... what a beautiful hood matching my beautiful oven !!! ... The motor died ( tears all over the kitchen )... all the other parts were ok so only the $105.00 motor to be replaced ( expensive for a little motor ).... took the motor / blower unit all apart & did a... Read more
Usually ships within 4 - 14 days
This is a metal duct connector plate designed to attach a 7-inch round duct to a range hood vent housing. It provides a secure transition between the hood exhaust outlet and the ductwork, often incorporating a damper function to prevent backdrafts. Replace this plate if you notice air leaking around the duct connection, a rattling noise during operation, or if the existing plate is damaged or corroded.
Fix a range hood light or fan that won't turn on or off with this rocker switch. Restores manual control when switches stick or fail to respond.
I ordered the switches from AppliancePartsPros.com and replaced both the light switch and the fan switch. The difficult part of the project is removing the old switches. The collapsible holders on the switches require pressure and maneuvering through the small opening to remove the switches. Problem with original design. The easiest and most satisfying part of the project was the ordering and delivery of the switches. I ordered one day and they were delivered the next day. Both the order... Read more
Captures grease, smoke, and particles to maintain efficient ventilation. Replace when clogged to restore airflow and reduce odors. Verify fit with model.
Replacement filter for downdraft ventilation systems. Captures cooking byproducts and maintains airflow. Replace when saturated or damaged to restore performance. Verify fit with your model number.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.