Need Help?
Call or text
Oven won't heat or takes too long to preheat? A faulty igniter is the most common cause. This round-style gas range igniter is a 15-30 minute DIY fix.
There are two igniters in oven, one for top broiler and one for bake oven at bottom. Your website help me troubleshoot the problem and locate the part. ordered part was delivered the next day. Following the instructions that others on your website had provided, the repair was quick and SUCCESSFUL. No need to pull out oven as power cord can be accessed from removing bottom storage drawer. Step 1: Remove the storage drawer from below the oven and disconnect the power cord from inside. No need... Read more
Seals your oven door to retain heat and maintain proper cooking temperature. Replace if torn, brittle, or heat escapes. Clips into place in minutes.
Ordered New Gasket and installed in about 3-4 Minutes. Only need small pliers to remove some of old clips from holes. New Gasket clipped in easily by hand. Read more
Replacement oven rack for electric and gas ranges. Installs inside oven cavity. Needed when original rack is missing, damaged, or warped from use.
Orded rack by stove model number. fit perfect Read more
Oven not reaching set temperature or won't turn off? The thermostat regulates oven heat. DIY repair typically takes 30-60 minutes with basic tools.
The repair was relatively simple and quick. The only part required was a new oven thermostat assembly and the tools I used for my model was a flathead screwdriver, cross-point screwdriver, torque bit and 1/4 inch socket using a bit driver. To complete the repair, I did the following: 1. Remove all top stove burner pieces and place to the side. Remove the 3 three screws (torque bit) in each of the 4 burner locations. That will allow the top lid to separate from the main unit later. 2. Pull... Read more
The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.
All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster.
Symptoms of a burnt out refrigerator light bulb include:
This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models.
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks Read more
Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.
I was getting really frustrated with our oven. It would preheat to the correct temperature, then slowly lose heat until it was down to about 200 degrees. So it took about two hours to heat a pizza! Finally decided to repair the oven myself, rather than pay $300.00 to have a repair person come out. Ordered the replacement igniter from AppliancePartsPros.com, and it arrived in two days. I followed the instructional video on the AppliancePartsPros.com website, and it was going well until I... Read more
Replace your range's light receptacle socket when the oven light flickers or won't turn on. Easy DIY fix restores proper bulb connection. Confirm fit by model.
Called Appliance Parts - service agent was extremely helpful. Tried to find an assembled piece was unable to do so. Send me the individual parts which were very easy to assemble. Was able to replace entire light assembly, reconnect wire with new terminal end. Light works find just now. Would definitely call again if I needed assistance. Read more
The Bumper is an OEM part for GE ranges. It is located on the sides of the oven drawer and serves as a cushion to prevent noise, vibration, and wear. As time goes on, regular use of the appliance can cause it to become damaged or worn out.
Causes of a bad bumper can include wear and tear from regular use, deterioration of the material over time, or damage from excessive force when closing the door.
Symptoms of a bad Bumper include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Looked for the parts at this site and ordered those need plus spares Read more
Replacement power cord for gas ranges. Connects your unit to the wall outlet. Replace if cord is worn, cut, heat-damaged, or causing burning smells.
I purchased a new power cord and installed it myself. Read more
Replacement oven door hinge assembly for ranges. Installs on the door frame to control opening and closing. Replace if broken, cracked, or no longer springs.
By replacing the hinge. Read more
Includes 12 washers.
This is a replacement screw that can be used with many different types of household appliances. Screws fasten various pieces of machines together. They can also help to reduce the amount of vibration in the machine. If a screw is missing or damaged, it could cause a machine to stop working properly, or to vibrate more than it should.The screws are made from metal and will typically last for a long time. However, the threads and other parts of the screw can wear down with use. The screws could also become lost when making other repairs to the appliance. Replacement of the screws is generally easy, but it will depend on where it is placed.This item can replace certain screws found in various models of ranges, ovens, dryers, and microwaves from General Electric, Hotpoint, Whirlpool, and Kenmore. This is a genuine OEM replacement part sourced from the manufacturer. It is sold individually. Owners may want to have several replacements on hand in case they need them.
I was very pleased to get the glass on time and it was a perfect match. The only thing I had trouble was to get the screws required to fix. The screws were not available, so spend too much time trying find equivalent screws in homedepot. Read more
Size: 10-32 GXTT FLP.595 S
Great site to DIY! Purchased fresh produce drawer railing and parts. Fixed in under 10 minutes. Thanks so much! Read more
Replaces the handle on your range's lower broiler drawer. Install this part if your current handle is cracked, broken, loose, or missing.
Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.
My husband gets irked when I take it upon myself to do appliance repair. This isn't my first project. I looked at various websites and found this one very helpful. Information was consistent with what the GEappliance website had. Video instilled confidence that the job could be simply done. Price was right and a new ignitor module was installed; easy peasy! Appliance works like new! Read more
Secures components to your appliance chassis for a rattle-free fit. Replace missing, stripped, or corroded screws to keep panels and brackets aligned.