5 Ears Parts

The Direct Drive Washer Motor Coupling is an OEM replacement part for Whirlpool washers. It is responsible for connecting the motor to the transmission, allowing the washer to agitate and spin the clothes during the wash and spin cycles.

A bad motor coupling can be caused by prolonged use, heavy loads, or overloading the washer. It can also wear out or break over time due to normal usage.

Symptoms of a bad motor coupling include:

• The washer not agitating or spinning.
• Unusual noises, such as grinding or rattling, during operation.
• The motor running but the drum not moving.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Heavy Duty Motor Coupling is an OEM replacement part for Whirlpool washers. Found joining the transmission to the motor, it transfers rotational force during every cycle.

Symptoms of a bad coupling include:

• Abnormally loud noises emitting from the coupling area
• Vibration felt through the cabinet walls
• The washer drum spinning unevenly or not at all

Causes stem from constant stress absorbing rotational energy. Continuous use demands durability.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

NOTE: This heavy-duty direct drive washer motor coupling is located between the motor and transmission. For the standard coupling order 285753A.

The Pulsator Coupling is an OEM replacement part for GE washing machines. It is a component located inside the washer tub that allows for the connection and movement of the agitator. The coupling pulsator works with the drive motor to rotate the agitator back and forth during the wash cycle, helping to thoroughly clean clothes through agitation.

Causes of a bad pulsator coupling include wear and tear over time, damage due to impact or foreign objects getting lodged in the mechanism, or deterioration of internal components that restrict proper movement.

Symptoms of a bad pulsator coupling include:

• The agitator not spinning or rotating as it should
• Grinding or clicking noises coming from the tub area
• Vibrations felt in the top of the washer
• Improper agitation, resulting in poor cleaning performance

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This drain hose coupling joins two sections of a washer's drain hose to create a secure, leak-resistant connection. Replace a cracked or loose connector to help prevent leaks and support proper draining performance. What it does

• Connects two drain hose sections for proper water discharge
• Maintains a tight, sealed joint to help prevent leaks at the hose connection
• Restores a secure hose path if the original coupling is cracked, worn, or missing
• Common symptoms: water on the floor during drain, loose hose connection, or hoses separating

• Drain hose coupling

• Disconnect power and turn off water before servicing; pull the washer forward for access
• Place a towel or pan to catch residual water from hoses
• Loosen hose clamps, remove the old coupling, fully seat both hose ends on the new coupling, and tighten clamps securely
• Run a brief drain/rinse and inspect the connection for leaks

This drain hose coupling kit connects the washer drain hose to the appliance drain outlet, restoring a secure, leak-resistant hose connection and preventing water leaks during drain cycles. What it does:

• Provides a replacement coupling to join the drain hose to the washer drain outlet
• Re-establishes a tight hose connection to reduce leaks and water damage
• Addresses symptoms such as leaking at the drain connection or a loose hose fit
• Compatible with affected Whirlpool top-load washer drain assemblies

• Unplug the appliance before servicing and work on a dry surface
• Remove the old coupling and inspect the hose and outlet for damage before installing
• Ensure the hose is fully seated and secure with the existing or supplied clamp(s)