Ags781ww Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Foot Pad Kit

4.8 (56)

By: Whirlpool

Part Number: 814323

The Foot Pad Kit for Whirlpool ranges is an OEM part specifically designed to fit underneath the grates. These small but critical components provide cushioning and stability for the grates, preventing them from scratching the cooktop surface and reducing noise and movement during cooking.

Symptoms of worn or missing Foot Pads include:

Grates that wobble or shift during use
Increased noise, such as rattling or scraping, when moving pots and pans
Scratches or other damage to the cooktop surface beneath the grates
Uneven cooking surfaces which can affect the stability of cookware

Causes of degradation in foot pads can include high heat exposure, frequent cleaning that wears down the material, or the natural breakdown of rubber or silicone over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Lost one of the pads for the stove grates on our fridgadaire stove top Roger S. • Broken Arrow , OK • December 24, 2016

Orders set of four pads. Came in the mail about three days later. Replaced lost pad and it fit perfectly. Read more

$13.57

Compare At:: $16.28
You Save:: $2.71

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Igniter

4.8 (56)

By: Whirlpool

Part Number: 786324

The Oven Igniter is an OEM part for Whirlpool ovens. It is responsible for igniting the gas burner to produce heat, which is essential for baking and broiling. The igniter heats up to a high temperature and then sparks to ignite the gas, ensuring that the oven reaches and maintains the desired cooking temperature.

You should replace the oven igniter if it becomes faulty. Causes of a bad igniter can include electrical failures, wear and tear from regular use, or damage from exposure to high temperatures. A malfunctioning igniter can prevent the oven from heating properly or at all.

Symptoms of a bad oven igniter include:

The oven not heating up or taking longer than usual to reach the desired temperature
The igniter glowing but failing to ignite the gas burner
No visible glow from the igniter when the oven is turned on
The oven producing a clicking sound without igniting

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling
Little to no heat when baking
Gas igniter glows, but will not light
Won't start

Do-It-Yourself Stories from Customers like You Broiler igniter failed James S. • Winchester , MA • September 26, 2014

Replaced the igniter, Simple but there are several points to remember. TURN THE POWER OFF 1) remove the oven door or you will have a hard time reaching the back of the oven. Mine just lifted off. 2) The igniter tip is fragile put a drop cloth over the oven floor in case you drop it even after it is in its holder. 3) The drop cloth will catch screws too if you drop them so they won't fall into the oven. 4) The cable from the oven is very short even after pulling it out from the hole at the back.... Read more

$53.95

Compare At:: $64.74
You Save:: $10.79

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw (8-18 X 5/8)

5.0 (2)

By: Whirlpool

Part Number: WP693995

This 8-18 x 5/8-inch screw secures appliance panels, brackets, and covers. Replacing a missing or stripped fastener restores a tight fit and helps prevent vibration or loosening where this exact size is specified.

Fastens sheet-metal or plastic components where a #8-18 x 5/8 screw is called for
Helps maintain alignment and reduce rattling or vibration
Replaces stripped, corroded, or missing screws of the same size
Common symptoms: loose panels, gaps/poor fit, rattling noises, or visible missing hardware

What's included: One screw Installation notes:

Disconnect power and shut off gas/water (as applicable) before service
Match thread and length to the original; replace screws one at a time to keep parts aligned
Start threads by hand to avoid cross-threading; tighten snugly without overtightening
If the receiving threads are damaged, additional repair (clip, insert, or new nut) may be needed

Do-It-Yourself Stories from Customers like You There was no power cord and accessories to attach it Terry C. • Martin , TN • December 27, 2016

I put all pieces that I ordered on the dryer and plugged it in. Read more

$7.95

Compare At:: $9.54
You Save:: $1.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Temperature Sensor

4.8 (12)

By: Whirlpool

Part Number: WPY0314907

This temperature sensor monitors internal temperature and relays it to the control so heating or cooling can be regulated. Replacing a faulty sensor helps restore accurate temperature control, consistent cycling, and dependable performance. What it does

Measures compartment or cavity temperature and sends a signal to the control
Helps the unit reach and maintain the set temperature
Common failure symptoms: temperature too hot/cold vs. setting, long/short cycling, failure to reach setpoint, or related error codes
Tests out-of-range for resistance/ohms when defective

What's included

1 temperature sensor

Install notes

Disconnect power before servicing; shut off gas
Access the sensor; note wire routing and connector orientation
Do not pull on wires; transfer any clips, grommets, or brackets from the old sensor
Restore power and run any model-specific diagnostics or calibration if required

This part fixes the following symptoms

Oven is too hot
Won't start
Little to no heat when baking

Do-It-Yourself Stories from Customers like You Incorrect temperature inside my oven food want cooking properly Robert T. • Centereach , NY • March 06, 2015

Ordered a new temperature sensor. Very very easy repair. Appliance parts pros never steers me wrong. They always have the exact part I need. Have ordered from than quite a bit. Read more

$102.95

Compare At:: $123.54
You Save:: $20.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Rack

5.0 (4)

By: Whirlpool

Part Number: WP314763J

Color: chrome. Measures about 23 inches wide by 16 inches deep.

Do-It-Yourself Stories from Customers like You Needed an oven rack Carol L. • Schwenksville , PA • August 04, 2015

My son bought a house with an oven that had no oven racks so I searched the internet and found the correct size and best price on AppliancePartsPro. Purchase was easy and the rack was in the oven in 2 days. Will definitely shop here again. Read more

$41.95

Compare At:: $50.34
You Save:: $8.39

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw

By: Whirlpool

Part Number: WP489474

Size: 8 x 1-1/4 inch.

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw

4.7 (3)

By: Whirlpool

Part Number: 8169479

This replacement screw secures appliance panels, brackets, or internal components to keep them tight and aligned. Replace a missing, stripped, or damaged fastener to restore a solid, rattle-free fit and reliable operation.

Fastens parts to the cabinet or frame to prevent movement
Replaces missing, stripped, or corroded hardware that can cause looseness, vibration, or noise
Helps correct gaps or misalignment after service
Maintains proper support for covers, trims, or brackets

What's included: 1 screw Install notes:

Disconnect power; shut off gas/water if applicable before servicing
Match screw length and location to the original position
Start threads by hand to avoid cross-threading; tighten snugly without overtightening
Repair or replace damaged clips/inserts before installing the new screw

Do-It-Yourself Stories from Customers like You No Catherine S. • Grants Pass , OR • November 15, 2014

Yes Read more

$7.95

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw (Mounting Fastener)

By: Whirlpool

Part Number: W11245710

This is a genuine replacement mounting screw used to secure appliance panels and components. It restores proper fastening to reduce vibration and prevent parts from loosening during normal operation. What it does:

Secures panels, brackets, or trim to the appliance frame
Prevents rattling or vibration caused by loose fasteners
Keeps wiring and small components held in place
Helps maintain proper alignment of removable parts

What's included: One screw Install notes:

Disconnect power to the appliance before servicing
Use the correct screwdriver or bit to avoid stripping the head
Start threads by hand, then tighten until snug; do not overtighten
Keep removed fasteners organized to ensure correct reassembly

$10.38

Compare At:: $11.84
You Save:: $1.46

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Nut K

By: Whirlpool

Part Number: M0282005

$5.31

Compare At:: $6.27
You Save:: $0.96

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Module W/Bracket

4.6 (5)

By: Whirlpool

Part Number: 32020101

Do-It-Yourself Stories from Customers like You Spark module on stove Arthur K. • Skokie , IL • September 09, 2014

Took off the stove top, ordered a new module. It was here in 24 hours. Amazing. Stove works fine now. Saved me from a major repair bill. Read more

Genuine Whirlpool part

Oven Door Hinge, Left Side

4.7 (3)

By: Whirlpool

Part Number: R0706010

This part fixes the following symptoms

Door won't close

Do-It-Yourself Stories from Customers like You Hinges on my oven had been jerry rigged with a bolt/screw fix for the past 5 years of course the heat didn't stay in the oven when i baked Rhonda D. • Bremerton , WA • December 27, 2015

My son searched the internet for replacement hinges. Found them at Appliance Parts Pros.com. The stove is approximately 18 years old, so imagine my surprise! The parts were delivered 2 days after our order was placed...and arrived on Christmas Eve, in time for dinner. To install, he did have to purchase a single die/tappit thingie to make the screws work. He is so good at this stuff and whatever he did worked!! Guess what? I was able to bake a pineapple upsidedown cake for breakfast on... Read more