Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

3032Uc/14 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Oven Igniter
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303935066

Oven won't light or ignites with a loud pop? A faulty igniter is usually the cause. Simple DIY fix—disconnect two screws and wire nuts to replace.

This part fixes the following symptoms
  • Gas smell
  • Gas igniter glows, but will not light
  • Little to no heat when baking
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You My oven would not light   Jean B. • Pass Christian , MS • June 22, 2014

My Tappan Range, which I paid a grand total of $65.00 for, and have been using since Katrina, (Katrina in 2005 is how we measure time in South Mississippi.) I live in an old house, and I am old, too. Last winter was the coldest I can remember, and my husband (older than I and far more hard-headed) used the oven like a heater. I read all user's manuals, because I use only used stuff, I can download the manuals or read them online, and it clearly stated in there NOT to use the oven as a... Read more

More
$46.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Light Bulb (40W)
Genuine Frigidaire part
By: Frigidaire
Part Number: 316538904

The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.

Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.

Symptoms of a bad Light Bulb include:

  • The oven interior remains dark when the light switch is engaged.
  • Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
  • Completely non-functional light, which can hinder your ability to monitor cooking progress.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Do-It-Yourself Stories from Customers like You The bottom heating element wasn't working in top oven   Kevin Scott W. • Parker , CO • January 09, 2015

Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old... Read more

More
$21.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Truss-Head Screw, #8-32 X 3/16 (Switch Mounting)
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303288565

This truss-head machine screw secures a switch to its mounting bracket or panel. Replacing a worn or missing screw restores a solid, aligned switch fit for reliable operation.

  • Fastens the switch body to a bracket or chassis panel
  • Helps keep the switch aligned for consistent actuation
  • Replaces stripped, corroded, or missing mounting hardware
  • Common symptoms: loose or wobbly switch, misalignment, rattling or vibration around the switch area
What's included: 1 truss-head machine screw (#8-32 x 3/16) Install notes:
  • Disconnect power to the appliance before servicing
  • Start threads by hand to avoid cross-threading; tighten snugly without overtightening
  • Verify thread size and length match the original hardware
  • If multiple screws secure the switch, replace them in a consistent pattern to maintain alignment

Do-It-Yourself Stories from Customers like You My ceramic surface cooktop had a large burner that would stick in the full on setting regardless of the control position   Hugh H. • Duluth , GA • August 01, 2016

I replaced the Switch for the burner. Works fine. Read more

More
$7.48

IN STOCK
Ships Today Guaranteed
Add to Cart
Bolt Carriage
Genuine Mtd part
By: Mtd
Part Number: 710-0451

A carriage bolt is a type of fastener. It features a smooth rounded head and a square domed top. It has threading, which leads to up to the square shoulder. The purpose of its square is to prevent the bolt from spinning. Once the carriage bolt is inserted through the hole, using a nut and washer can provide additional security. Carriage bolts can corrode and loosen over time. Since it doesn't have a slotted head, a socket wrench is needed when replacing. This bolt carriage replacement is compatible with wood chippers, tillers, string trimmers, lawnmowers, and edgers. It is a genuine MTD product that measures 5/16x.075. It has a smooth rounded head and square shoulder underneath it. This carriage bolt is sold individually.

Do-It-Yourself Stories from Customers like You Scraper blade on my craftsman snow blower was worn to the point the bolts were gone and the blade was catching the augers   Martin D. • Monroe , MI • February 11, 2022

Removed old scraper blade. Filed away bent edges where casing was worn. Installed new scraper blade and bolts. added a backing plate to body where erosion occurred. East repair. Best part was that big snowstorm was forecast for Wednesday night. 12-18 inches expected. Parts arrived on Wednesday morning, right at time predicted. I was up and running before the snow hit (actually only got 6 inches. So much for the Storm of the Century) Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Burner Grate
Genuine Frigidaire part
By: Frigidaire
Part Number: 316055800

Fits some Tappan, Frigidaire, GE, and Hotpoint models. Color: Black. Diameter: 6 1/2 inches. One round gas grate per package. For the matching drip pan order 5303131115.

Do-It-Yourself Stories from Customers like You Electronic ignitors on gas stove went out failed spark module   Marianne S. • Milwaukee , WI • February 10, 2015

Tappen Gas Stove circa 1981 (uses Fridgidaire parts). Unplugged stove from 110 wall outlet. Spark control module located on back side of stove about mid-way down on left side under a black cover that juts out. Black cover had 2 phillips head screws...removed the black cover and the spark module was right there...held on by 2 additional phillips screws. Sprark module purchased was identical to old one on the stove. Removed each wire, one at a time from the old spark module (slide off) and placed... Read more

More
$48.36

IN STOCK
Ships Today Guaranteed
Add to Cart
Range Securing Clip
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303284616

Secures panels and components in your range or oven. Replace if broken, bent, or missing to prevent shifting and reduce vibration noise. Confirm fit.

Do-It-Yourself Stories from Customers like You Oven element went out   Tess F. • Palacios , TX • December 19, 2014

Unscrewed the back of the element and added the new one. very easy to do Read more

More
$7.67

IN STOCK
Ships Today Guaranteed
Add to Cart
Oven Igniter
Genuine Frigidaire part
By: Frigidaire
Part Number: 316T023P05

Fix an oven that won't heat or has weak ignition. This gas oven igniter glows to light burners reliably. Typical DIY install in 30-45 minutes.

Do-It-Yourself Stories from Customers like You O'keefe and merritt oven igniter glowed orange but burner did not light   Walter H. • Woodland Hills , CA • August 19, 2014

As recommended in your repair video the likely cause was increased resistance in the igniter. Although I could not match the part by oven model number because of its age, I queried your site for oven igniters and matched the part by photo and description. The part that arrived was an exact match. After installation, the oven worked perfect both on auto and manual settings. Read more

More
$150.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Hex Bolt
Genuine Mtd part
By: Mtd
Part Number: 710-0514

This is a genuine replacement bolt that is designed specifically for use on select lawn tractors. This tractor bolt is a specialty piece of hardware designed for use on the steering segment gear. This screw holds the gear in place and is exposed to constant vibrations and repetitive motion as a result. Over time, that can result in damage, wear, or even total breakage of the bolt and require a replacement. If the bolt isn't functional or is missing, the steering segment gear will not be secured and that can lead to further damage if left unattended. Using a genuine replacement part like this will guarantee an exact fit for compatible models. This genuine OEM gear bolt is manufactured by MTD. It is compatible with lawn and garden equipment from RYOBI, HUSKEE, Troy-Bilt, Bolens, Yard Machines, Yard Man, and Cub Cadet, along with select models from MTD. The bolt works for more than 100 compatible models. It is made of durable metal and sold as an individual unit. A wrench or socket will be required to replace this part. Always wear gloves when performing repairs on lawn and garden equipment and allow the engine to cool before doing any work.

Do-It-Yourself Stories from Customers like You Stripped out steering gear.   Wayne H. • Stewartstown , PA • September 21, 2018

New steering column. Read more

More
$4.69

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303300265

Specs: 8 - 18 x 0.500

More
$13.20

IN STOCK
Ships Today Guaranteed
Add to Cart
Lawn Equipment Hex Screw
Genuine Mtd part
By: Mtd
Part Number: 710-0597

Hex screw for lawn tractors, mowers, snow blowers, and tillers. Replaces broken, stripped, or missing screws in various assembly points.

More
$4.14

IN STOCK
Ships Today Guaranteed
Add to Cart
Lawn Mower Hex Cap Screw
Genuine Mtd part
By: Mtd
Part Number: 710-0751

Hex cap screw fastener for outdoor power equipment. Secures components with hexagon-shaped head. Replace if stripped, broken, or missing threads.

More
$4.14

IN STOCK
Ships Today Guaranteed
Add to Cart
Hex Screw
Genuine Mtd part
By: Mtd
Part Number: 710-3008

This is a hex screw used on a variety of types of lawn and garden equipment. On large machinery, it is often used to mount the gas tank. On smaller items, it tends to be used to clamp the housing together. It can secure items like plastic, metal, brick, and wood together. It measures 5/16-18 x .75 inches and is made of durable metal. In some cases, the screw can become damaged, broken, or stripped, which means it needs to be replaced.A visual inspection will indicate whether the screw is damaged. If it needs to be replaced, a hex wrench can be used to remove it from the equipment. Afterward, the replacement hex screw can be installed with the wrench before being tightened to ensure materials hold together well.This hex screw is a genuine OEM part that is sold individually. It is sourced directly from the manufacturer. The hex screw is compatible with lawnmowers, wood chippers, log splitters, snowblowers, chainsaws, edgers, tillers, leaf blowers, and string trimmers by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Broan, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Turf King, Yard-Man, and MasterCut.

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Flange Nut
Genuine Mtd part
By: Mtd
Part Number: 712-3004A

This is a flange nut that can be used in a variety of lawn and garden equipment from different manufacturers. The nut is made of metal, measures 5/16x18, and is used to secure components in place. It also assists with preventing backing out caused by vibration. Over time, the flange nut can become damaged and will need to be replaced. If the flange nut in lawn and garden equipment has become damaged, is loose, or gets lost, then replacement is required. The level of difficulty of replacing a flange nut depends on which parts it's securing and what kind of equipment it is installed on. This flange nut is an OEM replacement part that can be used with lawn mowers, snowblowers, wood chippers, tillers, log splitters, leaf blowers, and edgers by MasterCut, Craftsman, Yard-Man, Toro, Bolens, Cub Cadet, Montgomery Wards, Ryobi, Huskee, Troy-Bilt, MTD, and Yard Machines. It is sold individually and will require a wrench or socket for installation.

More
$4.31

IN STOCK
Ships Today Guaranteed
Add to Cart
Lawn Tractor Drive Belt Tension Pulley
Genuine Mtd part
By: Mtd
Part Number: 756-0487

Regulates drive belt tension on lawn tractors and snowblowers. Replace if worn, cracked, or causing belt slippage. Verify fit with your model number.

More
$52.21

IN STOCK
Ships Today Guaranteed
Add to Cart
Pin-Cotter-3/32 Di
Genuine Mtd part
By: Mtd
Part Number: 914-0507

 

More
$6.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Nut-Hex Flange Loc
Genuine Mtd part
By: Mtd
Part Number: 712-04054

 

More
$7.39

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google